Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Moderator: moved here as first post.
Hi, I recently inherited an RX8 which I was intending to get up to scratch for my little brother’s first car. However it has some issues which local mechanics don’t see to be able to diagnose, so I’m a little stuck. Basically it’s just not a happy bunny at idle, I think the 'lumpy' sound is misfiring? The engine was just rebuilt (less than 5 months ago as it included a 2 yr warranty) so I went to take it back to them last week but they’ve just gone bust (ARGH).
Video of it here:
http://rgupdates.co.uk/RX8Dieing.mp4
A little bit of extra info:
It has following mods:
Bridge ported (on rebuild).
Ultralight flywheel (on rebuild).
Masimoto Oil pipes
Remap+Dyno (with the 4k rev protection) (on rebuild).
AEM Cold air intake (After rebuild)
Uprated ignition system (Halo Racing, but may be fake according to what i've read) (before rebuild)
R3 Starter upgrade
Has Always run Premixed.
Cheers
Hi, I recently inherited an RX8 which I was intending to get up to scratch for my little brother’s first car. However it has some issues which local mechanics don’t see to be able to diagnose, so I’m a little stuck. Basically it’s just not a happy bunny at idle, I think the 'lumpy' sound is misfiring? The engine was just rebuilt (less than 5 months ago as it included a 2 yr warranty) so I went to take it back to them last week but they’ve just gone bust (ARGH).
Video of it here:
http://rgupdates.co.uk/RX8Dieing.mp4
A little bit of extra info:
It has following mods:
Bridge ported (on rebuild).
Ultralight flywheel (on rebuild).
Masimoto Oil pipes
Remap+Dyno (with the 4k rev protection) (on rebuild).
AEM Cold air intake (After rebuild)
Uprated ignition system (Halo Racing, but may be fake according to what i've read) (before rebuild)
R3 Starter upgrade
Has Always run Premixed.
Cheers
-
- Club Member
- Posts: 5942
- Joined: Mon Apr 18, 2011 7:20 pm
- RX-8: 231
- Colour: Custom
- Location: Boston Lincs PE20 2NZ
- Has thanked: 173 times
- Been thanked: 172 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Who rebuilt it then?
-
- Club Member
- Posts: 13233
- Joined: Wed Dec 28, 2011 8:30 am
- Location: Cork Ireland
- Has thanked: 147 times
- Been thanked: 288 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Bridgeport rebuilds tend to ' brap' on idle, was it a full bridgeport? What's it like to drive?
R3 GONE, FUN WHILE I HAD HER BUT NOW LOVING MY 25TH ANNIVERSARY MX5
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
-
- Forum Moderator
- Posts: 12439
- Joined: Mon Jun 28, 2004 11:38 pm
- RX-8: 40th Anniversary
- Colour: Crystal White
- Location: In the land of the big cat!
- Has thanked: 42 times
- Been thanked: 229 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Well the place to start is to verify you have quality ignition coils, plugs and leads (they all can be poor quality copies) but one would assume a reputable builder would do that at the rebuild stage, then if required get a Rotary engine compression check, followed by the exhaust components then take it from there, who rebuilt the engine?
*
*
Del.
1st Brilliant Black 190. 2nd Brilliant Black PZ. 3rd Strato Blue 230. 4th Crystal White 40th Anniversary.
Rotary FX fender grills, Japspeed stainless exhaust, Cosworth Air filter, Kinetix slotted & dimpled discs, EBC Red stuff pads, Ryan Rotary MK11 coils, Magnecor leads, Stainless front & rear grills, HID main beams, LED tail lights, front side lights/front fogs.
Rotary FX fender grills, Japspeed stainless exhaust, Cosworth Air filter, Kinetix slotted & dimpled discs, EBC Red stuff pads, Ryan Rotary MK11 coils, Magnecor leads, Stainless front & rear grills, HID main beams, LED tail lights, front side lights/front fogs.
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Hi Ian & to the RX-8OC
<<<<<< Please put your Location in your Profile Box, it will help us to know where you are, if required any help in the future
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
<<<<<< Please put your Location in your Profile Box, it will help us to know where you are, if required any help in the future
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
-
- Club Member
- Posts: 3180
- Joined: Mon May 15, 2017 9:09 pm
- RX-8: 231
- Colour: Strato Blue
- Location: Northants
- Has thanked: 29 times
- Been thanked: 332 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
that sound on the video could be duff ignition system , or it could simply be the result of the bridgeport
as most bridgeport car need to have the idle speed raised to get past the rough idle point and even then will make a brap, brap brap noise
what rpm is it idling at when warm ? as 800 rpm is a normal car but bridgers seem to need 1200-1400rpm
as most bridgeport car need to have the idle speed raised to get past the rough idle point and even then will make a brap, brap brap noise
what rpm is it idling at when warm ? as 800 rpm is a normal car but bridgers seem to need 1200-1400rpm
-
- Events Team Member
- Posts: 12606
- Joined: Sun Jun 27, 2004 7:14 pm
- RX-8: 231
- Colour: Titanium Grey
- Location: Colchester
- Has thanked: 508 times
- Been thanked: 453 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
I agree, that could simply be the result of the bridgeport. Mine has a rough/unsteady idle too, not dissimilar to the video.
Essex Rotary Full Bridgeport
Seibon Carbon Fibre Bonnet, "Racing Brake" front calipers, Racing Beat (RB) ARB's F&R, RB REVI intake, full RB Stainless Steel Exhaust & Mani, 20mm Eibach spacers, KOYO Ali Rad, Lightened Fly, Tein MonoFlex coilovers & strut brace, Axial short-shifter, BHR Coils & Engine Mounts, Greddy Sump
Federal 595RS-R or Rainsport 3
Seibon Carbon Fibre Bonnet, "Racing Brake" front calipers, Racing Beat (RB) ARB's F&R, RB REVI intake, full RB Stainless Steel Exhaust & Mani, 20mm Eibach spacers, KOYO Ali Rad, Lightened Fly, Tein MonoFlex coilovers & strut brace, Axial short-shifter, BHR Coils & Engine Mounts, Greddy Sump
Federal 595RS-R or Rainsport 3
-
- Club Member
- Posts: 28322
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Whereabouts are you as that affects where we can direct you for workshop support.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Hiya, I am just south of Exeter in devon (paignton).
I will get the details of the rebuilder out of the boot tomorrow .
To drive it isn't too bad, a few minor issues (stalls sometimes at idle if revs drop).
There is a big puff of black smoke comes out the back when you put your foot down hard :O.
The exhaust (whole thing) has been changed to get it through MOT as it had a non-street legal Racing Decat exhaust.
It's had new spark plugs, new leads, but not yet new coils. I'm worried about buying new coils if they are unnecessary i would rather not pay for them.
The car has an occasional misfire it reports, but this (as a non rotary owner, i've only ever owned Alfa's (Oh yes dont make fun)) sounds really strange to me!
I want to get it compression tested but the garage dont have a way of doing it apparently - i guess maybe go to mazda?
I will get the details of the rebuilder out of the boot tomorrow .
To drive it isn't too bad, a few minor issues (stalls sometimes at idle if revs drop).
There is a big puff of black smoke comes out the back when you put your foot down hard :O.
The exhaust (whole thing) has been changed to get it through MOT as it had a non-street legal Racing Decat exhaust.
It's had new spark plugs, new leads, but not yet new coils. I'm worried about buying new coils if they are unnecessary i would rather not pay for them.
The car has an occasional misfire it reports, but this (as a non rotary owner, i've only ever owned Alfa's (Oh yes dont make fun)) sounds really strange to me!
I want to get it compression tested but the garage dont have a way of doing it apparently - i guess maybe go to mazda?
-
- Spin Doctor
- Posts: 32600
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2089 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
The oil may have been overfilled, that would account for the smoke when accelerating and some misfiring.
See viewtopic.php?f=25&t=36391
See viewtopic.php?f=25&t=36391
-
- Forum Moderator
- Posts: 32772
- Joined: Tue Sep 12, 2006 1:54 am
- RX-8: 192
- Colour: Sunlight Silver
- Location: Kent (out in the sticks - nothing urban here)
- Has thanked: 266 times
- Been thanked: 320 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Hi and Iantheace. The nearest specialists to you would be RX Motors in Salisbury or Rotary Motion in WIltshire I think, I'm not sure many Mazda dealers now will still have rotary compression test machines and if they do they're known to charge a lot more than specialists or club members ... there may be a club member nearer to you who has one if you're lucky. Alternatively find Luke Murdoch on Facebook and see if he will be down your way some time soon (he is mobile and goes all round the country) Here is a link to his page https://www.facebook.com/Murdochs-Rotar ... 174826564/
'Grington.
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
-
- Forum Moderator
- Posts: 12439
- Joined: Mon Jun 28, 2004 11:38 pm
- RX-8: 40th Anniversary
- Colour: Crystal White
- Location: In the land of the big cat!
- Has thanked: 42 times
- Been thanked: 229 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Black exhaust is a sign of over fuelling which could be poor ignition you really need to make sure it is all OK - poor ignition is not good on a Rotary don`t be tempted to buy cheap stuff off eBay it invariably will be Chineeez specials even NGK plugs are now copied.
To put it bluntly you will get away with poor ignition parts on a piston engine - a Rotary will suffer.
*
*
Del.
1st Brilliant Black 190. 2nd Brilliant Black PZ. 3rd Strato Blue 230. 4th Crystal White 40th Anniversary.
Rotary FX fender grills, Japspeed stainless exhaust, Cosworth Air filter, Kinetix slotted & dimpled discs, EBC Red stuff pads, Ryan Rotary MK11 coils, Magnecor leads, Stainless front & rear grills, HID main beams, LED tail lights, front side lights/front fogs.
Rotary FX fender grills, Japspeed stainless exhaust, Cosworth Air filter, Kinetix slotted & dimpled discs, EBC Red stuff pads, Ryan Rotary MK11 coils, Magnecor leads, Stainless front & rear grills, HID main beams, LED tail lights, front side lights/front fogs.
-
- Club Member
- Posts: 2602
- Joined: Thu Dec 31, 2009 5:20 pm
- RX-8: R3
- Colour: Crystal White
- Location: Either on another planet or Redhill, Surrey
- Has thanked: 1 time
- Been thanked: 47 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
BHR coils should be more than adequate. Bridgeport’s, as others have said, have different idle characteristics.
Don’t touch a dealer for a compression test. If you can’t get a proper one done, You can do a Ghetto compression test that will give crude results that will show any major problems. Bridgeports do lower compressions.
I suggest you join the club for the extra resources available.
I wish I had a brother like you. My first car was a 34 bhp Beetle.
Don’t touch a dealer for a compression test. If you can’t get a proper one done, You can do a Ghetto compression test that will give crude results that will show any major problems. Bridgeports do lower compressions.
I suggest you join the club for the extra resources available.
I wish I had a brother like you. My first car was a 34 bhp Beetle.
Ian
Now back to one, a white R3. Gone but not forgotten: 04 Tit Grey 231, 06 Copper Red Evolve (231), 09 VR R3, 10 Aurora Blue R3, 06 Black PZ; RX87 13BREW project car ;-( ; 04 White with Greddy turbo conversion ;-(
Buying a used RX8 turbo is like marrying a stripper.
Beware - older people may be cr@p drivers but they can afford better lawyers
Now back to one, a white R3. Gone but not forgotten: 04 Tit Grey 231, 06 Copper Red Evolve (231), 09 VR R3, 10 Aurora Blue R3, 06 Black PZ; RX87 13BREW project car ;-( ; 04 White with Greddy turbo conversion ;-(
Buying a used RX8 turbo is like marrying a stripper.
Beware - older people may be cr@p drivers but they can afford better lawyers
-
- Spin Doctor
- Posts: 32600
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2089 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
A dirty MAF would cause the AFR to be off, hence the black smoke from fuel. If there's still excess oil on the intake then the smoke would be white.
Black smoke can also be an indication that one (or more) of your fuel injectors is leaking, as in not shutting off fully.
Sent from my SM-G800F using Tapatalk
Black smoke can also be an indication that one (or more) of your fuel injectors is leaking, as in not shutting off fully.
Sent from my SM-G800F using Tapatalk
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Thanks for all the help, I will join the club and gift the membership to my little brother once car is ready if that’s ok? Or maybe just get it in his name anyway?
- These users thanked the author Iantheace for the post:
- GreySilver Beast (Sun Sep 13, 2020 12:10 am)
-
- Forum Moderator
- Posts: 32772
- Joined: Tue Sep 12, 2006 1:54 am
- RX-8: 192
- Colour: Sunlight Silver
- Location: Kent (out in the sticks - nothing urban here)
- Has thanked: 266 times
- Been thanked: 320 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
I'd think that will save any complications ...
'Grington.
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
I just got it in mine, I’ll get him one once he passes . I’m gonna use it for a bit of track fun anyway with him now and then.
-
- Club Member
- Posts: 579
- Joined: Sat Dec 15, 2018 8:47 pm
- RX-8: 231
- Location: Sutton Surrey.
- Has thanked: 4 times
- Been thanked: 50 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Needs a compression test.
You may as well start from basic and go from there.
As it looks like it’s been off the road for over a year?.
Especially as it’s just failed it’s mot on emissions
cat (missing).
You may as well start from basic and go from there.
As it looks like it’s been off the road for over a year?.
Especially as it’s just failed it’s mot on emissions
cat (missing).
13BLT Renesis Rotary powered Dolomite Sprint in the making.
Balanced Lightened and Tweaked.and Supercharged.
Balanced Lightened and Tweaked.and Supercharged.
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Got Murdoch’s rotary specialist Coming to take a look .
-
- Forum Moderator
- Posts: 32772
- Joined: Tue Sep 12, 2006 1:54 am
- RX-8: 192
- Colour: Sunlight Silver
- Location: Kent (out in the sticks - nothing urban here)
- Has thanked: 266 times
- Been thanked: 320 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Excellent, he will sort you out and make sure it's all good, he's a good lad.
'Grington.
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
-
- Club Member
- Posts: 579
- Joined: Sat Dec 15, 2018 8:47 pm
- RX-8: 231
- Location: Sutton Surrey.
- Has thanked: 4 times
- Been thanked: 50 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Most Excellent Dude.
Damm good choice.
Damm good choice.
13BLT Renesis Rotary powered Dolomite Sprint in the making.
Balanced Lightened and Tweaked.and Supercharged.
Balanced Lightened and Tweaked.and Supercharged.
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
On another random note (murdoch's coming tomorrow) do you still send out membership packs? I like the keyring
-
- Club Member
- Posts: 3643
- Joined: Wed Dec 21, 2016 4:58 pm
- RX-8: R3
- Colour: Velocity Red
- Location: Milton Keynes, UK
- Has thanked: 233 times
- Been thanked: 146 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
We do (read I do), but you've just missed the previous batch and I'm sorting out a new batch of keyrings as the current supplies are running very low, so you may have a slight delay in getting it, but you will get it, eventually!
Alan (he/him)| 2010 R3 | stock apart from a couple of dings and scrapes! (Black diamond discs, yellow stuff pads, RRP MkII Coils, MSD leads...)
-
- Former Member
- Posts: 21
- Joined: Thu Sep 10, 2020 10:56 pm
- Has thanked: 0
- Been thanked: 5 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
Engine was tested today by murdoch's, and the read rotor has no compression (2.6), so even though it was just rebuilt, its broken.
It was LC rotary that did the rebuild, and it seems their warranty isn't /wasn't insurance backed..... So con artists i guess as the rebuild was £3500........
If the engine was rebuilt so badly, do you think the bridge port etc im thinking the birdge might be awful too. Might be worth binning the whole engine .
It was LC rotary that did the rebuild, and it seems their warranty isn't /wasn't insurance backed..... So con artists i guess as the rebuild was £3500........
If the engine was rebuilt so badly, do you think the bridge port etc im thinking the birdge might be awful too. Might be worth binning the whole engine .
- These users thanked the author Iantheace for the post:
- bigpete8 (Thu Sep 17, 2020 4:50 pm)
-
- Committee Member
- Posts: 5323
- Joined: Sat Apr 13, 2019 6:40 pm
- RX-8: 231
- Colour: Custom
- Location: Cider Country
- Has thanked: 11 times
- Been thanked: 284 times
Re: Just got an RX8, but it seems broken and my garage dont know hot to fix it.....
It depends entirely on how it was rebuilt. The irons maybe perfectly fine and the housings/rotors could also be in good condition. Or they could all be scrap parts that shouldn't of been reused. An apex seal may have gone or a side seal? Im sure Luke would've mentioned which was the likely loss of compression when he tested it. Did you ask Luke his thoughts at all?
Club Treasurer
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071