What have you done to your RX-8 today????

[goodeggbob]

So ,this weekend i am going to fit a new steering rack,rod ends and the group buy oil cooler lines to kuro 2.
This time the cooler lines should be much easier without any air con and steering rack in the way,quite looking forward to it actually.

[Ollie]

Just make sure that when you put everything else back in Rob nothing fouls or you'll be irritated to no end. This week is purchasing a new battery for me. I did contact my local motor DIY shop about a battery... Sadly they cant supply me with a Varta and never got back to me with the pricing on a Bosch S4. So I'm thinking I will just have to swallow the £14 postage fee on Tayna. Absolutely ridiculous seeing as I don't live in the highlands! (Ron and Craig would be able to confirm this!)

[mrspiller]

Glad you have a pair of nuts now.

Just need a strong sack now lol


Sent from my iPhone using Tapatalk

[goodeggbob]

last time i had a bit of a scare with the oil level when refilling after cooler lines,this time i shall check level before i start and measure everything that comes out and put the same ammount of new oil back in,i shall probably give it a few spins on the starter before firing it up,oh the joys of having a manual oil pressure gauge.

[goodeggbob]

Glad you have a pair of nuts now.

Just need a strong sack now lol


Sent from my iPhone using Tapatalk

You must have heard about the unemployed castrator,
He got the sack.

[Ollie]

last time i had a bit of a scare with the oil level when refilling after cooler lines,this time i shall check level before i start and measure everything that comes out and put the same ammount of new oil back in,i shall probably give it a few spins on the starter before firing it up,oh the joys of having a manual oil pressure gauge.

Just plan for at least 5~ or so litres and you're all good.

[30405]

Had to drive into the office for something and it turns out black cars get hot even when parked in the shade.



I won't repeat the words I yelled when the bare backs of my legs (I'm wearing shorts, don't get too excited Nigel) contacted the black leather seat (and the nice gel packs inside that retain the heat...)

Thank Christ my air con works well! I do wish the seats were vented on RX8's...

Don't forget your suncream everyone, it's a proper scorcher out there.

[warpc0il]

I do love my RX-8 cloth seats

[sKenDread]

Had to drive into the office for something and it turns out black cars get hot even when parked in the shade.



I won't repeat the words I yelled when the bare backs of my legs (I'm wearing shorts, don't get too excited Nigel) contacted the black leather seat (and the nice gel packs inside that retain the heat...)

Thank Christ my air con works well! I do wish the seats were vented on RX8's...

Don't forget your suncream everyone, it's a proper scorcher out there.

Funny that. The same thing happened to Sarah. Just after I'd measured various places in the car. Facing the sun. Dashboard 89°C, seats 76°C, rear tray 80°C

[untakenname]

My first RX8 had black seats and no aircon which meant I left the rear windows open and had a sunshield over the windscreen otherwise it would be too hot to enter if it had been in the sun for a prolonged period of time.
My Kuro has white seats and aircon was regassed a couple of years back so no issues now

[V8 Power]

I’m so glad I didn’t ditch my air con. It would have been unbearable on days like this.

[Lucky 8 Racing]

Fitted this

833186B7-BD37-40A4-9A85-CCF906960547.jpeg

[Ollie]

Christ Dan, must've been a lot of effort working against gravity.

[Lucky 8 Racing]

Christ Dan, must've been a lot of effort working against gravity.

Considering so the fitment is spot on

[Neilparry]

Nice Dan
Good colour match.


Sent from my iPhone using Tapatalk

[Lucky 8 Racing]

Nice Dan
Good colour match.


Sent from my iPhone using Tapatalk

Very surprised at how good it is considering it was done off the car and just with the fuel flap as a match

[Ollie]

Does look spot on though. Would be hard to tell that it wasn't always there which is pretty much perfect!

[PaulAV]

Spent some time today fitting my newly acquired racing beat header, didn't start on it until late afternoon, nearly there now, just need to hook up the hard pipe to the header and then the air pump, it's a tight old fit in there, not sure as yet how I'm going to get the hard pipe secured to the header, I have one bolt in but the other is going to need me to get inventive. No major issues other than a captive nut breaking loose.

[PaulAV]

Finished installation of the racing beat manifold, the hard pipe connection was a mare, along with moving the engine mount bracket in and out of the wheel arch. Car has a nice rasp to it now when reving.

[Ollie]

Tried to give it its first start in a few months. Foot to the floor turned key for a few seconds. Key off.. Key to ignition on. Nothing happens.. Oh boy.

Battery light and check engine light stay illuminated. Starter is turning but engine doesn't sound like it's going anywhere?

[warpc0il]

You need to check that CEL as it should tell you why it's not firing.

Mine did this after not being used for a few months and it was the ESS failing the pre-flight test.
Cleared the CEL and it fired up.

[Ollie]

Torque won't connect to the ecu with key in on position using my Bluetooth connector for some reason.

[warpc0il]

Check the fuses that protect the PCM

[Ollie]

Used my other adapter. Says there aren't any fault codes... But the lights stay on.

[Ollie]

Is it worth a 20 stomp?