OEM Engine Mounts
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
OEM Engine Mounts
Hi,
My RX8 has a vibration in the cabin while parked up in neutral (gear stick and rear view mirror shake) and I've been told it's probably the engine mounts. Car is 17 years old.
I've seen RRP and Infinity Rotary sell mounts, does anyone else sell new or refurbished OEM mounts?
Thanks,
Rich
My RX8 has a vibration in the cabin while parked up in neutral (gear stick and rear view mirror shake) and I've been told it's probably the engine mounts. Car is 17 years old.
I've seen RRP and Infinity Rotary sell mounts, does anyone else sell new or refurbished OEM mounts?
Thanks,
Rich
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Spin Doctor
- Posts: 32582
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2087 times
Re: OEM Engine Mounts
Check RacingBeatEurope and see what Clive can do for you on new oem mounts.
Sent from my Samsung using Tapatalk
Sent from my Samsung using Tapatalk
- These users thanked the author warpc0il for the post:
- RichT_Derby (Thu Oct 21, 2021 8:37 pm)
-
- Club Member
- Posts: 3171
- Joined: Mon May 15, 2017 9:09 pm
- RX-8: 231
- Colour: Strato Blue
- Location: Northants
- Has thanked: 29 times
- Been thanked: 328 times
Re: OEM Engine Mounts
Or you can buy some poly urethane jollop , and drill out / modify your worn out ones to restore them
- they are not as good as a stock mount but considerably cheaper ( about £20 in materials)
- they are not as good as a stock mount but considerably cheaper ( about £20 in materials)
- These users thanked the author 350matt for the post:
- RichT_Derby (Thu Oct 21, 2021 9:14 pm)
-
- Club Chairman
- Posts: 4786
- Joined: Thu Oct 08, 2015 10:55 am
- RX-8: R3
- Colour: Crystal White
- Location: N. Wales
- Has thanked: 52 times
- Been thanked: 297 times
Re: OEM Engine Mounts
I have as above tiger sealed mounts before. Not on an rx8 though and doing that would probably still give the vibrations you currently feel due to the firmness of filled mounts
- These users thanked the author DrewR3 for the post:
- RichT_Derby (Thu Oct 21, 2021 9:14 pm)
Club Chairman
RX-8 2010 R3, Crystal white, 26k miles, Full Mazda Service History
Daily - 2012 Mercedes E220 Coupe AMG sport, Deep Blue, 19 inch AMG alloys with Michelin Pilot Sport 4s, AMG BBK with drilled discs
Previous RX-8 - 2006 '56' S1 Pz Prodrive edition, Galaxy Grey
RX-8 2010 R3, Crystal white, 26k miles, Full Mazda Service History
Daily - 2012 Mercedes E220 Coupe AMG sport, Deep Blue, 19 inch AMG alloys with Michelin Pilot Sport 4s, AMG BBK with drilled discs
Previous RX-8 - 2006 '56' S1 Pz Prodrive edition, Galaxy Grey
-
- Club Member
- Posts: 5942
- Joined: Mon Apr 18, 2011 7:20 pm
- RX-8: 231
- Colour: Custom
- Location: Boston Lincs PE20 2NZ
- Has thanked: 174 times
- Been thanked: 174 times
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
Fuming at myself for letting bigpetes mounts disappear from under my nose.
Racing beat Europe's are nearly £350 a pair, same as RRPs version. Do rx8 oc members get a discount anywhere?
Racing beat Europe's are nearly £350 a pair, same as RRPs version. Do rx8 oc members get a discount anywhere?
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Spin Doctor
- Posts: 32582
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2087 times
Re: OEM Engine Mounts
You could talk to Clive at RBE and see what you can do for you, as a member.
- These users thanked the author warpc0il for the post:
- RichT_Derby (Mon Oct 25, 2021 4:43 pm)
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
I've ordered some from JDM Planet, thanks LeeW.
- These users thanked the author RichT_Derby for the post:
- LeeW (Mon Oct 25, 2021 6:51 pm)
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Club Member
- Posts: 28317
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: OEM Engine Mounts
Good saving even if it works out at c28% clearance and vat on top.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Club Member
- Posts: 507
- Joined: Fri Mar 23, 2018 3:05 pm
- RX-8: Kuro
- Colour: Sparkling Black
- Location: Hurst Green, East Sussex
- Has thanked: 86 times
- Been thanked: 38 times
Re: OEM Engine Mounts
I had mine delivered with no duty or extra fees.ChrisHolmes wrote: ↑Mon Oct 25, 2021 8:37 pmGood saving even if it works out at c28% clearance and vat on top.
- These users thanked the author LeeW for the post:
- ChrisHolmes (Mon Oct 25, 2021 9:10 pm)
Kuro 174/500.
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
Is a threshold for duty or extra fees? I was charged £192 for the engine mounts.
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Club Member
- Posts: 28317
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: OEM Engine Mounts
I just mentioned the worst case scenario as here https://www.gov.uk/goods-sent-from-abroad/tax-and-duty but clearly this doesn’t always happen on imports.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Club Member
- Posts: 507
- Joined: Fri Mar 23, 2018 3:05 pm
- RX-8: Kuro
- Colour: Sparkling Black
- Location: Hurst Green, East Sussex
- Has thanked: 86 times
- Been thanked: 38 times
Re: OEM Engine Mounts
Has that been lowered recently? I had it in my head that it was £165 and the mounts fell under that value by just a smidge perfectly. Maybe it was always £135 and I just got lucky! I’m well aware that it’s hit and miss as to what you pay for some reason. But yeah, I never had to pay a pennie extra. Was a tip from Mihail, good option for getting a brand new OEM coolant tank too FYI….
Kuro 174/500.
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
Balls. Anyone got Jimmy Carr's tax lawyer in their phone book.
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Club Member
- Posts: 28317
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: OEM Engine Mounts
It depends what the seller declares as the value and the method of importing as not every item is checked by customs making it a bit of a lottery.
- These users thanked the author ChrisHolmes for the post:
- RichT_Derby (Mon Oct 25, 2021 10:42 pm)
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Spin Doctor
- Posts: 32582
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2087 times
Re: OEM Engine Mounts
It also depends on the category of item that the invoice appears to show, as different categories carry different duty levels.
That website isn't "worse case" as the carriers, such as DPD, UPS, Parcel Force, etc also take a collection fee for handling the charges. Basically they just deliver a ransom note...
See the later pages of this thread to see the massive variations in charges, for the same items, sent but the same seller, from Australia to the UK
That website isn't "worse case" as the carriers, such as DPD, UPS, Parcel Force, etc also take a collection fee for handling the charges. Basically they just deliver a ransom note...
See the later pages of this thread to see the massive variations in charges, for the same items, sent but the same seller, from Australia to the UK
-
- Former Member
- Posts: 233
- Joined: Sat May 01, 2021 1:49 pm
- RX-8: Kuro
- Colour: Kuro Black
- Location: Norfolk
- Has thanked: 39 times
- Been thanked: 15 times
Re: OEM Engine Mounts
Can you not buy them from the dealer, sometimes they surprise you! I bought a set from an eBay seller. I think they were a rotary specialist in Norfok/Suffolk? Can't find their name at the mo.
-
- Club Member
- Posts: 28317
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: OEM Engine Mounts
An excellent example Dave of the vagaries in the import system!warpc0il wrote: ↑Mon Oct 25, 2021 10:44 pmIt also depends on the category of item that the invoice appears to show, as different categories carry different duty levels.
That website isn't "worse case" as the carriers, such as DPD, UPS, Parcel Force, etc also take a collection fee for handling the charges. Basically they just deliver a ransom note...
See the later pages of this thread to see the massive variations in charges, for the same items, sent but the same seller, from Australia to the UK
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
Racing beat can't offer a discount due to what they have to pay Mazda for them. Although it's usually the driver's side that fails first. I don't actually know if zero, one or both mounts need changing, just was told that was most likely the cause of the vibration when I was chatting to RRP after they'd done the ignition coils. I've spent a grand on a master service reset, coils and now these mounts since I got the car so wallet needs a lie down.
- These users thanked the author RichT_Derby for the post:
- ChrisHolmes (Tue Oct 26, 2021 10:48 am)
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
-
- Club Member
- Posts: 507
- Joined: Fri Mar 23, 2018 3:05 pm
- RX-8: Kuro
- Colour: Sparkling Black
- Location: Hurst Green, East Sussex
- Has thanked: 86 times
- Been thanked: 38 times
Re: OEM Engine Mounts
Update us if you have to pay upon delivery. Be interesting to see if it is a lottery. I bought a brand new coolant tank from Mihail and I know he didn’t pay anything extra on that either.
If you don’t end up needing them, I’m sure at some point you will. Or if you need the money back I’m sure you won’t be out of pocket by selling them on via the forum.
Fingers crossed for you.
If you don’t end up needing them, I’m sure at some point you will. Or if you need the money back I’m sure you won’t be out of pocket by selling them on via the forum.
Fingers crossed for you.
Kuro 174/500.
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
RRP midpipe (single resonator) w/ Pettit/Milltek cat-back, RRP MK2 Coils and MSD leads, AEM Cold Air Intake, RRP Custom Map, Royal Steering Wheels custom wheel. Mazdaspeed bodykit, Team Dynamics Pro Race 1.2s, Smoked LED rear lights, Stoney Racing Hose Kit, Lots of red in the engine bay.
#174’s journey: viewtopic.php?f=104&t=78506
-
- Club Member
- Posts: 343
- Joined: Wed Mar 30, 2005 1:47 pm
- RX-8: 192
- Colour: Winning Blue
- Location: Derbyshire
- Has thanked: 60 times
- Been thanked: 37 times
Re: OEM Engine Mounts
I'll keep you posted.
2004 Winning Blue, Black Leather, 192
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton
Minimap, K&N Air Filter, RRP Mk3 Coils, Racingbeat Catback, Krown protected
Based in Long Eaton