PZ springs

Jeags · Post by **Jeags** » Thu Jul 30, 2020 4:40 pm

Cheers for all the help. I'll see how my finances are and if I have been a member for a year yet (must be close if not already) and take it from there. Leaning to the PZ suspension though as I'd like to keep it original

Sent from my CLT-L09 using Tapatalk

xamtex · Post by **xamtex** » Thu Jul 30, 2020 5:13 pm

i have found a spring on my shelf if you need 1.

Post by **casey** » Thu Jul 30, 2020 8:33 pm

Just FYI, the Shopkeeper (Ian) has just advised that there are 2 full suspension kits left. TWO people are currently enquiring after kits, but have not yet paid or committed to purchase. Once those 2 sets are gone, that's it!

Ainmhidh · Post by **Ainmhidh** » Thu Jul 30, 2020 10:27 pm

Unless there are people with sets from the group buy they'd be willing to part with...

Jeags - your renewal, with the 3 months bump from the COVID response, will be due by 1st January.

Jeags · Post by **Jeags** » Fri Jul 31, 2020 7:12 pm

I think I'll have to bite the bullet and get the set whilst I still can. I am aware I think I may be about a month off for qualifying for the members price, but do you think I'd be able to buy now/reserve/leave a deposit until I have 12 months confirmed for the members price? As stated before, It is what made me buy the car and would be a shame to have to fit an aftermarket solution, especially at the price for a 1+ year member.

cheers for all the help!

Post by **Ollie** » Fri Jul 31, 2020 7:26 pm

Did you miss Xamtex's post about finding a spring which I presume is a brand new PZ suspension rear spring?

Jeags · Post by **Jeags** » Fri Jul 31, 2020 7:28 pm

Yorindesarin wrote:Did you miss Xamtex's post about finding a spring which I presume is a brand new PZ suspension rear spring?

No, but I'm worried about it not sitting right (i.e. the old spring sagging more). And if another one goes, I'll be stuck then.

Sent from my CLT-L09 using Tapatalk

xamtex · Post by **xamtex** » Fri Jul 31, 2020 7:29 pm

Yorindesarin wrote: ↑
Fri Jul 31, 2020 7:26 pm
Did you miss Xamtex's post about finding a spring which I presume is a brand new PZ suspension rear spring?

not a new spring,just a used spare i have.

Post by **warpc0il** » Fri Jul 31, 2020 7:33 pm

A used spare would be a better match for the remaining, unbroken spring.

Sent from my SM-G800F using Tapatalk

Jeags · Post by **Jeags** » Fri Jul 31, 2020 7:35 pm

I'm just worried about the other springs and when they'll fail. The car has 74k miles on it so don't know how long they usually last. I don't really want to fit aftermarket suspension as the prodrive suspension was what made me buy a prodrive edition rx-8 after my first failed.

Sent from my CLT-L09 using Tapatalk

Post by **Ollie** » Fri Jul 31, 2020 7:43 pm

That makes sense I guess.

mi60o0 · Post by **mi60o0** » Fri Jul 31, 2020 9:38 pm

I'm preety happy with tein also plenty people track their rx8 with tein or maisters.

xamtex · Post by **xamtex** » Fri Jul 31, 2020 9:41 pm

pz is fit and forget...others need setting up.

mi60o0 · Post by **mi60o0** » Fri Jul 31, 2020 10:49 pm

You set it up the desire heights and then if you want to change damping etc.
Pz is 13 year old coilovers stuff move forward in my opinion I don't say they are bad but new things come on the market etc also tein have edfc with seems the bonkers

Jeags · Post by **Jeags** » Sun Aug 02, 2020 11:30 am

Is the best way to contact the shopkeeper via the contact section in the club shop? I've fired an email asking on Friday, so will hopefully get a response soon.

Sent from my CLT-L09 using Tapatalk

Post by **casey** » Sun Aug 02, 2020 11:45 am

Send a PM to Ian.Mothersole, he might see that quicker.

Jeags · Post by **Jeags** » Tue Aug 04, 2020 3:06 pm

Anyone know how long a response usually takes from the shop? I emailed and pm'd last week and haven't had a response yet. Just want to ensure I haven't missed out on the suspension! Cheers.

Sent from my CLT-L09 using Tapatalk

Post by **Ollie** » Tue Aug 04, 2020 3:09 pm

Ian usually replies within a day via PM if he isn't busy.

Jeags · Post by **Jeags** » Tue Aug 04, 2020 3:10 pm

Ok, I'll hold on for now!

Sent from my CLT-L09 using Tapatalk

GreySilver Beast · Post by **GreySilver Beast** » Tue Aug 04, 2020 3:22 pm

Just to remind everyone

, unlike half of the Committee who are Retired in some way

the other half including Ian are working hard in their jobs at the moment, but will deal with PM's when they get a chance to come online

Thank you for your patience - EC

Jeags · Post by **Jeags** » Tue Aug 04, 2020 3:32 pm

GreySilver Beast wrote:Just to remind everyone , unlike half of the Committee who are Retired in some way the other half including Ian are working hard in their jobs at the moment, but will deal with PM's when they get a chance to come online

Thank you for your patience - EC

Sorry if that came across insensitive, didn't mean to. I'll happily wait! Cheers.

Sent from my CLT-L09 using Tapatalk

mi60o0 · Post by **mi60o0** » Tue Aug 04, 2020 3:33 pm

Bunch of youngsters isn't it Nigel?

Jeags · Post by **Jeags** » Tue Aug 04, 2020 3:33 pm

mi60o0 wrote:Bunch of youngsters isn't it Nigel?

We're so uncultured and insensitive, aren't we?!

Sent from my CLT-L09 using Tapatalk

Conan · Post by **Conan** » Tue Aug 04, 2020 3:35 pm

Are teachers working ?

30405 · Post by **30405** » Tue Aug 04, 2020 4:27 pm

Sarah hasn't stopped. The amount of printing, laminating and cutting it's starting to look like a craft shop in here!

Join the Club / Renew Club membership

Membership brings benefits and discounts and full access to the forum - for the price of half a tank of petrol! Apply or renew online.

Club Shop

Buy RX-8OC merchandise and event tickets in the online shop

Member Discounts

Club member benefits and discounts

PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs

Re: PZ springs