NOT the end!
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
NOT the end!
Won't start when "warm". Sluggishly starts when cold or hot. Never did a compression test but probably too late for that now.
Is this the end of my 8?
Sent from my SM-G960F using Tapatalk
Is this the end of my 8?
Sent from my SM-G960F using Tapatalk
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
Video to come, cant upload right now
Sent from my SM-G960F using TapatalkLuke0611 wrote:Won't start when "warm". Sluggishly starts when cold or hot. Never did a compression test but probably too late for that now.
Is this the end of my 8?
Sent from my SM-G960F using Tapatalk
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Spin Doctor
- Posts: 32581
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2086 times
Re: The end?
You need to get a compression test, as compression could be the issue, but so could dying coils, fuel pump, spark plugs, ESS (Eccentric Shaft Sensor), IAT (Intake Air Temperature Sensor)
Even if it is compression then it's got to be worth a rebuild, being a 40th Anniversary.
Even if it is compression then it's got to be worth a rebuild, being a 40th Anniversary.
-
- Former Member
- Posts: 10000
- Joined: Wed Apr 09, 2014 8:48 pm
- Location: Fantasy land
- Has thanked: 93 times
- Been thanked: 165 times
Re: The end?
Does your starter motor seem to spin quickly?
“Extraordinary claims require extraordinary evidence " Carl Sagan.
-
- Club Member
- Posts: 850
- Joined: Sat Apr 04, 2015 10:06 am
- RX-8: 231
- Colour: Brilliant Black
- Location: Peterborough
- Has thanked: 0
- Been thanked: 5 times
Re: The end?
This is actually... the start of your rebuild thread where you get to have all things you ever wanted done to your 8
There is a fullbridge motor for sale by big pete, its my previous engine, it did under 2500miles, and had no expense spent on it. Every nut, bolt and tiny hose was replaced as new. It also comes with the ECU for the engine as it had days of dyno time to develop the map and be the first 8 with a pop and bag map.
The car and engine is this:
worth a consideration if you dont want to pay for a rebuild
- These users thanked the author mzivtins for the post:
- BigPete (Thu Sep 12, 2019 4:51 pm)
-
- Spin Doctor
- Posts: 32581
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2086 times
Re: The end?
Does that come with one of these?
You do not have the required permissions to view the files attached to this post.
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
It's beautiful.mzivtins wrote: ↑Thu Sep 12, 2019 4:44 pm
This is actually... the start of your rebuild thread where you get to have all things you ever wanted done to your 8
There is a fullbridge motor for sale by big pete, its my previous engine, it did under 2500miles, and had no expense spent on it. Every nut, bolt and tiny hose was replaced as new. It also comes with the ECU for the engine as it had days of dyno time to develop the map and be the first 8 with a pop and bag map.
The car and engine is this:
worth a consideration if you dont want to pay for a rebuild
Unfortunately I can't really afford to keep the car, let alone think about a rebuild, as much as I would love to. I've put plenty of money and time into it, and I love it to bits (haha). It's my own fault though, I knew what I was getting in to when I bought it.
Video didn't want to upload in any format here
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Committee Member
- Posts: 5312
- Joined: Sat Apr 13, 2019 6:40 pm
- RX-8: 231
- Colour: Custom
- Location: Cider Country
- Has thanked: 11 times
- Been thanked: 283 times
Re: The end?
That sounds like a stuck solenoid if I'm not wrong?
Club Treasurer
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
Once it sits for a little bit, it will eventually turn over after some more struggling. Once it's running, it drives as it always has done, idles normally. There's nothing wrong apart from the startup. Tell me I'm being overly pessimistic please.
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Club Member
- Posts: 13228
- Joined: Wed Dec 28, 2011 8:30 am
- Location: Cork Ireland
- Has thanked: 147 times
- Been thanked: 287 times
Re: The end?
Hard to say, you'll need a comp test to confirm if it's FUBAR
R3 GONE, FUN WHILE I HAD HER BUT NOW LOVING MY 25TH ANNIVERSARY MX5
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
-
- Spin Doctor
- Posts: 32581
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2086 times
Re: The end?
There's a whole bunch of things is *could* be, and "compression" wouldn't be top on my list of suspects.
How many miles on the engine?
How many miles on the engine?
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Spin Doctor
- Posts: 32581
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2086 times
-
- Club Member
- Posts: 13228
- Joined: Wed Dec 28, 2011 8:30 am
- Location: Cork Ireland
- Has thanked: 147 times
- Been thanked: 287 times
Re: The end?
In that case compression is a factor....
R3 GONE, FUN WHILE I HAD HER BUT NOW LOVING MY 25TH ANNIVERSARY MX5
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
I'll try and find somewhere that can take a look. If the news isn't all bad then I would love to hold on to it.
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Committee Member
- Posts: 5312
- Joined: Sat Apr 13, 2019 6:40 pm
- RX-8: 231
- Colour: Custom
- Location: Cider Country
- Has thanked: 11 times
- Been thanked: 283 times
Re: The end?
If no-one local can do it Luke Murdoch most probably can. And then you also have his expertise for after the compression test.
Club Treasurer
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071
Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress
For whats pending... See here: viewtopic.php?f=204&t=86071
-
- Former Member
- Posts: 1596
- Joined: Sat Aug 30, 2014 11:06 pm
- RX-8: 231
- Colour: Custom
- Location: Stroud
- Has thanked: 8 times
- Been thanked: 93 times
Re: The end?
Hi Luke, if you can make it to Stroud, I will happily compression test it for you?
Kamikaze
Too many to list.
Too many to list.
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
Thanks for the offer! Ryan Rotary is closer for me, so I think I'll take it there and see what they have to say
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Former Member
- Posts: 223
- Joined: Tue Mar 06, 2018 7:30 pm
- RX-8: 40th Anniversary
- Colour: Custom
- Location: Bromsgrove
- Has thanked: 82 times
- Been thanked: 60 times
Re: The end?
Had the compression test done, unfortunately averaging 4.5 and 4.6 bar for rotors 1 and 2 respectively. Rebuild is out of the question, as much as I'd love to have it as a track car.
Looks like it is the end after all
Sent from my SM-G960F using Tapatalk
Looks like it is the end after all
Sent from my SM-G960F using Tapatalk
R3-40th Anniversary [97/400] R3 face conversion in Ford Frozen White (originally Met Grey)
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
Engine Rebuild at 96,###.
Full bridge port
Tuned by Rotary Revs @209whp
Lightweight flywheel
Mazda Rev C Coils
AEM CAI
Racing Beat catback
Dual Res Decat
R-Magic Exhaust Manifold
Rota Pro R 18"/9.5
Yokohama AD08RS 255/40/18
TEIN Flex Z Coilovers
Whiteline ARBs
-
- Spin Doctor
- Posts: 32581
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2086 times
Re: The end?
Even if you can't afford a rebuild, I hope this goes complete to someone that can, rather than being broken.
Sent from my SM-G800F using Tapatalk
Sent from my SM-G800F using Tapatalk
-
- Club Member
- Posts: 5942
- Joined: Mon Apr 18, 2011 7:20 pm
- RX-8: 231
- Colour: Custom
- Location: Boston Lincs PE20 2NZ
- Has thanked: 174 times
- Been thanked: 174 times
Re: The end?
What's the overall condition like Luke?
Pm me if your selling
Pm me if your selling
- These users thanked the author BigPete for the post:
- acegeezer (Sun Sep 15, 2019 7:46 pm)
-
- Club Member
- Posts: 28317
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2572 times
- Been thanked: 940 times
Re: The end?
Those numbers don’t look bad. Did Scott check for any other possible cause of the bad starting?
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black
-
- Former Member
- Posts: 4726
- Joined: Sun Jan 10, 2016 10:14 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Leicestershire
- Has thanked: 265 times
- Been thanked: 359 times
Re: The end?
ChrisHolmes wrote: ↑Tue Sep 17, 2019 7:46 amThose numbers don’t look bad. Did Scott check for any other possible cause of the bad starting?
Um I'm sorry whut?
-= Rotormelon Money Pit Build of Tasteless Questionable Bodgery =-
Experimelon 183whp rebuild | Rotary Revs D585s | PZ Suspension | Hawk & Yellowstuff pads | Extra steering lock | Custom exhaust | Added rearward flames of glory | Unnecessarily repurposed ball gags-= Clicky click for build thread =-
-
- Forum Moderator
- Posts: 2496
- Joined: Wed May 17, 2017 12:27 pm
- RX-8: 231
- Colour: Sunlight Silver
- Location: Tyne & Wear
- Has thanked: 150 times
- Been thanked: 162 times
Re: The end?
They are in psi so 98.6 would be a compression of 6.9 as per the bottom of printout
They are very low.... At max 4.9
They are very low.... At max 4.9
Sunlight Silver 231
Pete/Peter him/he/hrh couldn't really care as have 3 siblings and was lucky not to get called by the dogs name.
Living with a rotary - 7 Years in
viewtopic.php?p=1105043#p1105043
Pete/Peter him/he/hrh couldn't really care as have 3 siblings and was lucky not to get called by the dogs name.
Living with a rotary - 7 Years in
viewtopic.php?p=1105043#p1105043