My outstanding fault codes / AC fault

[wilmington]

Evening all,
introduced my self on the other topic, Ive had my car a few months now im looking at getting it tip top.

Ive googled and fixed most of the cars issues. All that's left is Air con not working and the error coded bellow.

AIR CON >
Buttons all function ok, dash board shows AC on etc etc
When i attached regas kit to the low input its way over pressure. I drain it, recharge it. then after a short drive its over pressure.
Thinking something blocked?

Outstanding fault codes >

Path: MAZDA / Vehicle Auto Scan / Diagnose / Auto Scan
01.System Name EPS:Electronic-Controlled Power Steering NOT DTC
02.System Name IC:Instrument Cluster NOT DTC
03.System Name LCM:Lighting Control Module F[03]
U3570 Please refer to vehicle service manual! CMDTCs
C1300 ABS Pump Motor Circuit Failure CMDTCs
P005C Exhaust B Camshaft Profile Control - Performance or Stuck Off Bank 2 CMDTCs
04.System Name RCM:Restraint Control Module F[03]
U3558 Please refer to vehicle service manual! CMDTCs
C1300 ABS Pump Motor Circuit Failure CMDTCs
P0044 Coolant Fan Relay Short CMDTCs
05.System Name RKE:Remote Keyless Entry NOT DTC
06.System Name PCM:Powertrain Control Module NOT DTC


Any pointers appreciated

[xamtex]

AIR CON >
Buttons all function ok, dash board shows AC on etc etc
When i attached regas kit to the low input its way over pressure. I drain it, recharge it. then after a short drive its over pressure.
Thinking something blocked?

sorry but if this is the diy can kit then you will NEVER get the a/c to work properly,you might get lucky and improve it for a while but the only way is to get it regassed properly...a PROPER regas cures most a/c faults