Cup Holder appreciation
-
- Club Member
- Posts: 1751
- Joined: Tue Jan 28, 2014 10:57 pm
- Location: Eastern Malibu, Los Angeles.
- Has thanked: 23 times
- Been thanked: 111 times
Cup Holder appreciation
Can I just say that the man would decided to put the cup holders where they are in the 8 needs a hearty pat on the back.
Yesterday morning, bought a large café latte from the Nespresso boutique on the Champs Elysées and headed for central London via Chunnel. Seven hours later arrived at my destination with just a little bit of coffee left in my mug, but it was still piping hot! Unbelievable!!
Whoever you are, I salute you
Ranjan.
p.s., the journey would have been a lot quicker but for having to stop for fuel; three fill ups for 319 miles! My F12 is better on fuel for heaven’s sake
Yesterday morning, bought a large café latte from the Nespresso boutique on the Champs Elysées and headed for central London via Chunnel. Seven hours later arrived at my destination with just a little bit of coffee left in my mug, but it was still piping hot! Unbelievable!!
Whoever you are, I salute you
Ranjan.
p.s., the journey would have been a lot quicker but for having to stop for fuel; three fill ups for 319 miles! My F12 is better on fuel for heaven’s sake
-
- Former Member
- Posts: 4726
- Joined: Sun Jan 10, 2016 10:14 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Leicestershire
- Has thanked: 265 times
- Been thanked: 359 times
Re: Cup Holder appreciation
It's burning extra fuel to keep your coffee warm! Can't have your cake and eat it
- These users thanked the author 13Black for the post (total 2):
- geofftl1000r (Thu Oct 11, 2018 4:55 pm) • willberry70 (Thu Oct 11, 2018 10:27 pm)
-= Rotormelon Money Pit Build of Tasteless Questionable Bodgery =-
Experimelon 183whp rebuild | Rotary Revs D585s | PZ Suspension | Hawk & Yellowstuff pads | Extra steering lock | Custom exhaust | Added rearward flames of glory | Unnecessarily repurposed ball gags-= Clicky click for build thread =-
-
- Former Member
- Posts: 761
- Joined: Fri Jan 06, 2017 8:30 am
- RX-8: 13B 4-port
- Colour: Velocity Red
- Location: Dorset
- Has thanked: 33 times
- Been thanked: 56 times
Re: Cup Holder appreciation
Oooh agree whole heartedly here!
Went to the AGM a couple of years back, was a 3 hour journey for me, so I stopped half way to grab a coffee. As the coffee was still hot I decided to set off and wait till it cooled down a bit before swigging away.
Completely forgot I had the coffee and an hour and a half later when I got to the hotel I still hot cup of coffee to drink up!
Only downside of the cup holder placement is cold drink on a long journey, but minor detail!
Sent from my iPhone using Tapatalk
Went to the AGM a couple of years back, was a 3 hour journey for me, so I stopped half way to grab a coffee. As the coffee was still hot I decided to set off and wait till it cooled down a bit before swigging away.
Completely forgot I had the coffee and an hour and a half later when I got to the hotel I still hot cup of coffee to drink up!
Only downside of the cup holder placement is cold drink on a long journey, but minor detail!
Sent from my iPhone using Tapatalk
-
- Committee Member
- Posts: 8171
- Joined: Thu Jan 08, 2015 1:30 pm
- RX-8: R3
- Colour: Velocity Red
- Location: Cotswolds
- Has thanked: 186 times
- Been thanked: 548 times
Re: Cup Holder appreciation
Three fillups to 319 miles? I could do that and still have a 1/4 tank left?!
DOC 787B
Club Information Coordinator - Media Team Lead
LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler
Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
Club Information Coordinator - Media Team Lead
LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler
Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
-
- Club Member
- Posts: 1751
- Joined: Tue Jan 28, 2014 10:57 pm
- Location: Eastern Malibu, Los Angeles.
- Has thanked: 23 times
- Been thanked: 111 times
Re: Cup Holder appreciation
To be pedantic I may have stopped 3 times but altogether 2 actual full tanks; it was spirited driving but still 319!
I think there is something wrong with my car; when I bought it and drove it home I brimmed the tank and blasted it round the "B" roads back and that only lasted 147 miles!
Ranjan.
I think there is something wrong with my car; when I bought it and drove it home I brimmed the tank and blasted it round the "B" roads back and that only lasted 147 miles!
Ranjan.
-
- Club Member
- Posts: 3248
- Joined: Sat May 29, 2004 1:49 am
- RX-8: Import
- Colour: Black Cherry
- Location: Peterborough
- Has thanked: 8 times
- Been thanked: 119 times
Re: Cup Holder appreciation
***WARNING***WARNING***
Thread is turning into an MPG discussion
***WARNING***WARNING***
Thread is turning into an MPG discussion
***WARNING***WARNING***
- These users thanked the author Juey for the post (total 2):
- kopite72 (Thu Oct 11, 2018 4:42 pm) • geofftl1000r (Thu Oct 11, 2018 4:56 pm)
Black Cherry Mica
JDM Evolve. 192 6 spd manual from auto
I can explain it, but I can't understand it for you.
JDM Evolve. 192 6 spd manual from auto
I can explain it, but I can't understand it for you.
-
- Club Member
- Posts: 13233
- Joined: Wed Dec 28, 2011 8:30 am
- Location: Cork Ireland
- Has thanked: 147 times
- Been thanked: 288 times
Re: Cup Holder appreciation
L
O
L
O
L
R3 GONE, FUN WHILE I HAD HER BUT NOW LOVING MY 25TH ANNIVERSARY MX5
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
Cup Holder appreciation
I averaged 16.8mpg at Thruxton on Tuesday
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
-
- Former Member
- Posts: 3020
- Joined: Sun May 06, 2012 3:32 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Blazingstoke
- Has thanked: 11 times
- Been thanked: 35 times
Re: Cup Holder appreciation
Nigel, take your reasonable MPG and shove it where the sun doesn't shine
Ranjan, those MPG figures are pretty appalling. On track I've regularly seen single digit figures, but a bit of motorway stuff should see at least 240 miles from a tank. Something might well be wrong there, and I'll leave the spin doctors to comment further on the potential causes.
Back on topic: heated cup holders rule, there's nothing like road tripping with a continuous supply of heated beverage
Ranjan, those MPG figures are pretty appalling. On track I've regularly seen single digit figures, but a bit of motorway stuff should see at least 240 miles from a tank. Something might well be wrong there, and I'll leave the spin doctors to comment further on the potential causes.
Back on topic: heated cup holders rule, there's nothing like road tripping with a continuous supply of heated beverage
To Do List: HKS CAMP2 install; cruise control; new exhaust; detail paintwork, possible respray
Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
Cup Holder appreciation
Charming
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
-
- Club Member
- Posts: 13233
- Joined: Wed Dec 28, 2011 8:30 am
- Location: Cork Ireland
- Has thanked: 147 times
- Been thanked: 288 times
Re: Cup Holder appreciation
The heat that the trans tunnel produces is actually pretty astounding.On a cold day you don't even need the heater
R3 GONE, FUN WHILE I HAD HER BUT NOW LOVING MY 25TH ANNIVERSARY MX5
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
Mods so far..
BBR 200 PACKAGE
COBRA " RACE " BACK BOX
MEISTER COILOVERS
KONIG HYPERGRAMS ( POLISHED LIP)
RACING BEAT ARB's ( FRONT AND REAR )
IL MOTORSPORTS STRUT BRACE AND ADJUSTABLE
DROPLINKS
Mods planned..
BBR STAGE 2 SUPERCHARGED
WILWOOD 6 POT BBK
FULL UNDRBODY SEAL
ATOTO HEAD UNIT
-
- Former Member
- Posts: 901
- Joined: Sat Dec 19, 2015 6:08 pm
- Location: London
- Has thanked: 66 times
- Been thanked: 45 times
Re: Cup Holder appreciation
Always make the mistake of putting my house keys in there.
- These users thanked the author delta0 for the post:
- Scon3s (Thu Oct 11, 2018 7:48 pm)
RX8 R3 Aurora Blue Mica
BHR coils+MSD leads, Stage 1 ecu tune, HKS Hybrid oil filter, Idemitsu 10w30, BHR engine mounts, RB oil cooler lines, Essex Rotary undertray, RB Revi Intake+Ram Air, Milltek/Pettit cat+catback, braided brake lines, SuperPro bushes, RB flywheel, Exedy stage 1 clutch, Pettit Ti flywheel nut, powder coated and fully resealed everything underneath
BHR coils+MSD leads, Stage 1 ecu tune, HKS Hybrid oil filter, Idemitsu 10w30, BHR engine mounts, RB oil cooler lines, Essex Rotary undertray, RB Revi Intake+Ram Air, Milltek/Pettit cat+catback, braided brake lines, SuperPro bushes, RB flywheel, Exedy stage 1 clutch, Pettit Ti flywheel nut, powder coated and fully resealed everything underneath
-
- Former Member
- Posts: 761
- Joined: Fri Jan 06, 2017 8:30 am
- RX-8: 13B 4-port
- Colour: Velocity Red
- Location: Dorset
- Has thanked: 33 times
- Been thanked: 56 times
Re: Cup Holder appreciation
I’ve made the mistake of putting my phone and e-cigarette in there on a long run, they were uncomfortably warm to handle!
The hot trans tunnel is a god send in the winter!
Sent from my iPhone using Tapatalk
The hot trans tunnel is a god send in the winter!
Sent from my iPhone using Tapatalk
-
- Former Member
- Posts: 5849
- Joined: Mon Apr 11, 2016 1:26 pm
- RX-8: 231
- Colour: Custom
- Location: West Sussex
- Has thanked: 54 times
- Been thanked: 367 times
Re: Cup Holder appreciation
The Bongo's got an entire engine between the front seats, and it's still cooler than the Rex....
-
- Spin Doctor
- Posts: 32600
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2089 times
Re: Cup Holder appreciation
"The Hot Trans Tunnel" sounds like a very dodgy nightclub....
Sent from my SM-G800F using Tapatalk
Sent from my SM-G800F using Tapatalk
-
- Former Member
- Posts: 4461
- Joined: Sat Jul 05, 2014 2:05 pm
- Location: Essex
- Has thanked: 1 time
- Been thanked: 74 times
Re: Cup Holder appreciation
All great until the summer and you put a cold bottle of pop in there
Proud Member of the Essex Wankelist Massive
-
- Spin Doctor
- Posts: 32600
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 442 times
- Been thanked: 2089 times
Re: Cup Holder appreciation
Not too clever for Easter Eggs either.
Sent from my SM-G800F using Tapatalk
Sent from my SM-G800F using Tapatalk
-
- Former Member
- Posts: 4726
- Joined: Sun Jan 10, 2016 10:14 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Leicestershire
- Has thanked: 265 times
- Been thanked: 359 times
Re: Cup Holder appreciation
Quite!
-= Rotormelon Money Pit Build of Tasteless Questionable Bodgery =-
Experimelon 183whp rebuild | Rotary Revs D585s | PZ Suspension | Hawk & Yellowstuff pads | Extra steering lock | Custom exhaust | Added rearward flames of glory | Unnecessarily repurposed ball gags-= Clicky click for build thread =-
-
- Club Member
- Posts: 3180
- Joined: Mon May 15, 2017 9:09 pm
- RX-8: 231
- Colour: Strato Blue
- Location: Northants
- Has thanked: 29 times
- Been thanked: 332 times
Re: Cup Holder appreciation
I was thinking there was something wrong with my transmission tunnel insulation
nice to hear that piping hot in the armrest cupholders is normal
still I might take option to add some more material when I'm next under there
nice to hear that piping hot in the armrest cupholders is normal
still I might take option to add some more material when I'm next under there
-
- Former Member
- Posts: 4726
- Joined: Sun Jan 10, 2016 10:14 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Leicestershire
- Has thanked: 265 times
- Been thanked: 359 times
Re: Cup Holder appreciation
Because our manifolds are a little out of the way, I may see if the publishers want to do an RX-8 Armrest Edition.
You do not have the required permissions to view the files attached to this post.
-= Rotormelon Money Pit Build of Tasteless Questionable Bodgery =-
Experimelon 183whp rebuild | Rotary Revs D585s | PZ Suspension | Hawk & Yellowstuff pads | Extra steering lock | Custom exhaust | Added rearward flames of glory | Unnecessarily repurposed ball gags-= Clicky click for build thread =-
-
- Club Member
- Posts: 1751
- Joined: Tue Jan 28, 2014 10:57 pm
- Location: Eastern Malibu, Los Angeles.
- Has thanked: 23 times
- Been thanked: 111 times
Re: Cup Holder appreciation
Nick,
You may be onto something here.
Two holders could act as a two-burner stove; onions frying in one while you have some mince frying in the other; genius idea. I will fund the publishing if we can come up with some decent recipes.
Obviously, you could warm up soup, but some cooking ideas would be brilliant.
Well done Nick!
Ranjan.
You may be onto something here.
Two holders could act as a two-burner stove; onions frying in one while you have some mince frying in the other; genius idea. I will fund the publishing if we can come up with some decent recipes.
Obviously, you could warm up soup, but some cooking ideas would be brilliant.
Well done Nick!
Ranjan.
-
- Club Member
- Posts: 960
- Joined: Wed Jul 02, 2014 10:18 am
- RX-8: 231
- Colour: Kuro Black
- Location: London
- Has thanked: 71 times
- Been thanked: 90 times
Re: Cup Holder appreciation
Noticed when taking apart the centre console that my 04 had no insulation behind the cupholders but my 07 has a pretty thick silver blanket around them, perhaps Mazda had some feedback on earlier models.
My old RX8 had no aircon, wore jeans once in the summer and vowed never to again.
My old RX8 had no aircon, wore jeans once in the summer and vowed never to again.
-
- Former Member
- Posts: 761
- Joined: Fri Jan 06, 2017 8:30 am
- RX-8: 13B 4-port
- Colour: Velocity Red
- Location: Dorset
- Has thanked: 33 times
- Been thanked: 56 times
Re: Cup Holder appreciation
warpc0il wrote:"The Hot Trans Tunnel" sounds like a very dodgy nightclub....
Sent from my SM-G800F using Tapatalk
Better not tell Nigel...
Sent from my iPhone using Tapatalk
- These users thanked the author Humane-Hobgoblin for the post:
- GreySilver Beast (Fri Oct 12, 2018 12:04 am)
-
- Club Member
- Posts: 3248
- Joined: Sat May 29, 2004 1:49 am
- RX-8: Import
- Colour: Black Cherry
- Location: Peterborough
- Has thanked: 8 times
- Been thanked: 119 times
Re: Cup Holder appreciation
On the 1st Prodrive day I put my Lipsil stick in the cup holders.......
....cold, windy wintery day, been out on the 'airfield' for a while, must moisten lips.......grabs Lipsil from centre console.
SPLODGE.
....cold, windy wintery day, been out on the 'airfield' for a while, must moisten lips.......grabs Lipsil from centre console.
SPLODGE.
You do not have the required permissions to view the files attached to this post.
- These users thanked the author Juey for the post (total 2):
- 13Black (Fri Oct 12, 2018 11:13 am) • New Duke (Fri Oct 12, 2018 2:19 pm)
Black Cherry Mica
JDM Evolve. 192 6 spd manual from auto
I can explain it, but I can't understand it for you.
JDM Evolve. 192 6 spd manual from auto
I can explain it, but I can't understand it for you.
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
Cup Holder appreciation
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "