Tools, tools, tools (was Thumb Ratchets)
-
- Former Member
- Posts: 4461
- Joined: Sat Jul 05, 2014 2:05 pm
- Location: Essex
- Has thanked: 1 time
- Been thanked: 74 times
Re: Tools, tools, tools (was Thumb Ratchets)
Bit of a Thread ressurection
Had some of these little rascals, laying about for an RC project
https://www.ebay.co.uk/i/323331468274?r ... 2396459224
Have been fixing the rear window mech on the other half's car and was having a nightmare trying to get the nuts back on as if you drop them they end up in a virtually unreachable area in the body cavity.
Brainwave
Insert magnet into socket and secure with 2 small drops of superglue Nuts now stay in the socket while you try to get them onto the thread.
Once complete you can knock the magnet out with a small screwdriver drift
Had some of these little rascals, laying about for an RC project
https://www.ebay.co.uk/i/323331468274?r ... 2396459224
Have been fixing the rear window mech on the other half's car and was having a nightmare trying to get the nuts back on as if you drop them they end up in a virtually unreachable area in the body cavity.
Brainwave
Insert magnet into socket and secure with 2 small drops of superglue Nuts now stay in the socket while you try to get them onto the thread.
Once complete you can knock the magnet out with a small screwdriver drift
You do not have the required permissions to view the files attached to this post.
- These users thanked the author Essex2Visuvesi for the post (total 2):
- zippyonline (Wed Mar 27, 2019 2:18 pm) • EvilDes (Wed May 22, 2019 9:39 am)
Proud Member of the Essex Wankelist Massive
-
- Former Member
- Posts: 642
- Joined: Wed Sep 27, 2017 2:24 pm
- RX-8: PZ
- Colour: Brilliant Black
- Location: nuneaton
- Has thanked: 2 times
- Been thanked: 50 times
Re: Tools, tools, tools (was Thumb Ratchets)
https://www.ebay.co.uk/itm/Sealey-AK270 ... OSwImRYh0v
i have something like this.
i have something like this.
-
- Former Member
- Posts: 4461
- Joined: Sat Jul 05, 2014 2:05 pm
- Location: Essex
- Has thanked: 1 time
- Been thanked: 74 times
Re: Tools, tools, tools (was Thumb Ratchets)
Oh I like those!
Another tip for your mini magnets. glue one to the end of an old telescopic radio antenna. Makes a handy "rescuing nut from the abyss" tool
Another tip for your mini magnets. glue one to the end of an old telescopic radio antenna. Makes a handy "rescuing nut from the abyss" tool
Proud Member of the Essex Wankelist Massive
-
- Former Member
- Posts: 792
- Joined: Thu Sep 10, 2009 2:01 pm
- RX-8: 231
- Colour: Custom
- Location: Aylesbury
- Has thanked: 2 times
- Been thanked: 4 times
Re: Tools, tools, tools (was Thumb Ratchets)
https://rover.ebay.com/rover/0/0/0?mpre ... 1935536423
This is what I use as a telescopic magnet. Crap as a screwdriver, but excellent for getting dropped items.
Mine came from a pound shop.
This is what I use as a telescopic magnet. Crap as a screwdriver, but excellent for getting dropped items.
Mine came from a pound shop.
-
- Spin Doctor
- Posts: 32536
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 444 times
- Been thanked: 2080 times
Re: Tools, tools, tools (was Thumb Ratchets)
Sometimes being strongly magnetic is just what you need, while other times it's the last thing you need.
This does the job, at a stroke...
https://www.tengtools.com/r/gb/en/Screw ... rger-MR500
though cheaper versions are available.
The cheapest way to make a screwdriver magnetic, at least temporarily, is to whack it sharply against a solid object, like the steel leg of a bench.
The shock aligns the tiny magnets within the structure and lines them all up, creating a significant magnetic effect.
It's a party trick I learnt as an aircraft technician and it's served me well over the years.
Another related trick...
Stainless steel isn't magnetic, or at least the really good marine grade stainless isn't.
This is useful to know when trying to find a stainless bolt among a bunch of similar looking bolts.
It's also quite handy when you're buying "stainless" fasteners, hose clamps etc, and want to be sure that they're actually the grade that you're paying for.
However, aluminium alloys and the cheap nasty zinc alloys that fake wheel nuts are made from aren't magnetic either...
This does the job, at a stroke...
https://www.tengtools.com/r/gb/en/Screw ... rger-MR500
though cheaper versions are available.
The cheapest way to make a screwdriver magnetic, at least temporarily, is to whack it sharply against a solid object, like the steel leg of a bench.
The shock aligns the tiny magnets within the structure and lines them all up, creating a significant magnetic effect.
It's a party trick I learnt as an aircraft technician and it's served me well over the years.
Another related trick...
Stainless steel isn't magnetic, or at least the really good marine grade stainless isn't.
This is useful to know when trying to find a stainless bolt among a bunch of similar looking bolts.
It's also quite handy when you're buying "stainless" fasteners, hose clamps etc, and want to be sure that they're actually the grade that you're paying for.
However, aluminium alloys and the cheap nasty zinc alloys that fake wheel nuts are made from aren't magnetic either...
-
- Forum Moderator
- Posts: 2492
- Joined: Wed May 17, 2017 12:27 pm
- RX-8: 231
- Colour: Sunlight Silver
- Location: Tyne & Wear
- Has thanked: 150 times
- Been thanked: 162 times
Re: Tools, tools, tools (was Thumb Ratchets)
The shock aligns the tiny magnets within the structure and lines them all up
Are these tiny magnets electrons by any chance?
Are these tiny magnets electrons by any chance?
Sunlight Silver 231
Pete/Peter him/he/hrh couldn't really care as have 3 siblings and was lucky not to get called by the dogs name.
Living with a rotary - 7 Years in
viewtopic.php?p=1105043#p1105043
Pete/Peter him/he/hrh couldn't really care as have 3 siblings and was lucky not to get called by the dogs name.
Living with a rotary - 7 Years in
viewtopic.php?p=1105043#p1105043
-
- Forum Administrator
- Posts: 11009
- Joined: Mon Sep 03, 2012 9:51 pm
- RX-8: R3
- Colour: Sparkling Black
- Location: Caerphilly
- Has thanked: 47 times
- Been thanked: 155 times
Re: Tools, tools, tools (was Thumb Ratchets)
John
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
-
- Spin Doctor
- Posts: 32536
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 444 times
- Been thanked: 2080 times
Re: Tools, tools, tools (was Thumb Ratchets)
In Lidl (NI) today they have a ½" drive ratchet handle that also doubles-up as a hammer, recognising that some guys can't resist thumping the bolt with whatever they have to hand.
Someone just needs to invent a torque wrench that's also a breaker bar, and a vernier caliper that's also an adjustable spanner, and we'll be sorted
I already have the screwdriver/cold-chisel
Someone just needs to invent a torque wrench that's also a breaker bar, and a vernier caliper that's also an adjustable spanner, and we'll be sorted
I already have the screwdriver/cold-chisel
-
- Former Member
- Posts: 1307
- Joined: Mon May 05, 2014 11:16 am
- RX-8: Evolve
- Colour: Copper Red
- Location: Essex/Suffolk
- Has thanked: 30 times
- Been thanked: 27 times
Re: Tools, tools, tools (was Thumb Ratchets)
What has the world come to!
Copper Red Evolve - viewtopic.php?f=104&t=71400
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2567 times
- Been thanked: 940 times
Re: Tools, tools, tools (was Thumb Ratchets)
I have a mer which in conjunction with numerous bits of wood and metal is very handy to have in my toolbox.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 838
- Joined: Tue Sep 03, 2013 10:10 pm
- RX-8: 231
- Colour: Winning Blue
- Location: Bristol
- Has thanked: 14 times
- Been thanked: 25 times
Re: Tools, tools, tools (was Thumb Ratchets)
Just recieved this pressure tester, which has been invaluable in diagnosing that my tiny coolant leak, is in fact coming from the radiator.
https://www.ebay.co.uk/itm/New-18pcs-Au ... 2749.l2648
https://www.ebay.co.uk/itm/New-18pcs-Au ... 2749.l2648
Rex II
Miss July 2022 Pinup Calender.
Rhino Rack, Oil temp/pressure guages, Uprated Starter, Tein S-Tech Springs, 20mm Spacers, RRP MkIII Coils.
Rex I (gone but not forgotten)
Rotary Revs Rebuild, Oil Temp/Pressure Guages, Uprated Starter, K&N air filter, Eibach Pro Kit Springs, Bilstein B8 Shocks, RR D585 Coils, Magnecor Leads, Aero Kit
Miss July 2022 Pinup Calender.
Rhino Rack, Oil temp/pressure guages, Uprated Starter, Tein S-Tech Springs, 20mm Spacers, RRP MkIII Coils.
Rex I (gone but not forgotten)
Rotary Revs Rebuild, Oil Temp/Pressure Guages, Uprated Starter, K&N air filter, Eibach Pro Kit Springs, Bilstein B8 Shocks, RR D585 Coils, Magnecor Leads, Aero Kit
-
- Former Member
- Posts: 472
- Joined: Mon Aug 17, 2015 8:42 am
- RX-8: 231
- Colour: Velocity Red
- Location: Newbury, Berkshire
- Has thanked: 3 times
- Been thanked: 5 times
Re: Tools, tools, tools (was Thumb Ratchets)
If anyone wants to achieve the same for a lot less money get a bike inner tube, cut it opposite the valve, tie a knot in one end, put the other end over the filler cap and secure with cable tie or tape and then pump up with a bike pump to pressurise the system. Don't mean to P*** on your chips Reloy and I'm glad you found the leak.Reloy wrote: ↑Thu Aug 15, 2019 10:24 amJust recieved this pressure tester, which has been invaluable in diagnosing that my tiny coolant leak, is in fact coming from the radiator.
https://www.ebay.co.uk/itm/New-18pcs-Au ... 2749.l2648
White GT86 Aero
Dead - Red 231 with Haywards stage 2 engine, Tein Mono Sport coilovers with EDFC2 controller, stripped out interior, sunroof delete and racing beat anti-roll bars
Sold - Blue standard 231
Dead - Silver standard 231
Dead - Red 231 with Haywards stage 2 engine, Tein Mono Sport coilovers with EDFC2 controller, stripped out interior, sunroof delete and racing beat anti-roll bars
Sold - Blue standard 231
Dead - Silver standard 231
-
- Club Member
- Posts: 838
- Joined: Tue Sep 03, 2013 10:10 pm
- RX-8: 231
- Colour: Winning Blue
- Location: Bristol
- Has thanked: 14 times
- Been thanked: 25 times
Re: Tools, tools, tools (was Thumb Ratchets)
Dammit, I have all those things lying around the housedern wrote: ↑Thu Aug 15, 2019 10:38 amIf anyone wants to achieve the same for a lot less money get a bike inner tube, cut it opposite the valve, tie a knot in one end, put the other end over the filler cap and secure with cable tie or tape and then pump up with a bike pump to pressurise the system. Don't mean to P*** on your chips Reloy and I'm glad you found the leak.Reloy wrote: ↑Thu Aug 15, 2019 10:24 amJust recieved this pressure tester, which has been invaluable in diagnosing that my tiny coolant leak, is in fact coming from the radiator.
https://www.ebay.co.uk/itm/New-18pcs-Au ... 2749.l2648
Rex II
Miss July 2022 Pinup Calender.
Rhino Rack, Oil temp/pressure guages, Uprated Starter, Tein S-Tech Springs, 20mm Spacers, RRP MkIII Coils.
Rex I (gone but not forgotten)
Rotary Revs Rebuild, Oil Temp/Pressure Guages, Uprated Starter, K&N air filter, Eibach Pro Kit Springs, Bilstein B8 Shocks, RR D585 Coils, Magnecor Leads, Aero Kit
Miss July 2022 Pinup Calender.
Rhino Rack, Oil temp/pressure guages, Uprated Starter, Tein S-Tech Springs, 20mm Spacers, RRP MkIII Coils.
Rex I (gone but not forgotten)
Rotary Revs Rebuild, Oil Temp/Pressure Guages, Uprated Starter, K&N air filter, Eibach Pro Kit Springs, Bilstein B8 Shocks, RR D585 Coils, Magnecor Leads, Aero Kit
-
- Former Member
- Posts: 5849
- Joined: Mon Apr 11, 2016 1:26 pm
- RX-8: 231
- Colour: Custom
- Location: West Sussex
- Has thanked: 54 times
- Been thanked: 367 times
Re: Tools, tools, tools (was Thumb Ratchets)
Have you actually tried this Dern? I don't want to sound sceptical, but I'd be surprised if you could generate more than about 2psi in a bare inner tube. Is that enough to find anything?
-
- Former Member
- Posts: 472
- Joined: Mon Aug 17, 2015 8:42 am
- RX-8: 231
- Colour: Velocity Red
- Location: Newbury, Berkshire
- Has thanked: 3 times
- Been thanked: 5 times
Re: Tools, tools, tools (was Thumb Ratchets)
Yes, definitely, used it loads. You're right in that it won't find any leak that requires a huge amount of pressure to be exposed by I've found leaks in radiators, hoses and hose joints with it. Most recently on my ktm bike. The good thing is that you can't generate silly pressures.
I used to use a winemaker bung with a tyre valve jammed in it which is fine if it fits the filler neck and you can get more pressure. However I did fire one in to my forehead which put me off a bit.
- These users thanked the author dern for the post (total 3):
- PeteH (Thu Aug 15, 2019 1:26 pm) • ChrisHolmes (Thu Aug 15, 2019 11:19 pm) • zippyonline (Thu Sep 05, 2019 6:01 pm)
White GT86 Aero
Dead - Red 231 with Haywards stage 2 engine, Tein Mono Sport coilovers with EDFC2 controller, stripped out interior, sunroof delete and racing beat anti-roll bars
Sold - Blue standard 231
Dead - Silver standard 231
Dead - Red 231 with Haywards stage 2 engine, Tein Mono Sport coilovers with EDFC2 controller, stripped out interior, sunroof delete and racing beat anti-roll bars
Sold - Blue standard 231
Dead - Silver standard 231
-
- Forum Moderator
- Posts: 9053
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: Turbo
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 97 times
- Been thanked: 539 times
tool recommendations...
i thought id start a thread for tools (hand tools power tools etc) that you would recommend. extra points for ones that you wouldn't expect to be any good... ill start with..
Aldi Ferrex 5" angle grinder.
i blew up yet another cheap screwfix grinder (actually this time it was 100% my fault, i badly overheated it. it still runs but the switch push mech is welded so you have to push the button inside...) so i needed one sharpish. 5" is better for wire wheels, and aldi currently have a offer on so i grabbed one.
actually id recommend most ferrex tools. they are a cheap way of getting reasonable kit. the battery stuff is reputedly very good but ive no personal experience.
any one got any more?
Aldi Ferrex 5" angle grinder.
i blew up yet another cheap screwfix grinder (actually this time it was 100% my fault, i badly overheated it. it still runs but the switch push mech is welded so you have to push the button inside...) so i needed one sharpish. 5" is better for wire wheels, and aldi currently have a offer on so i grabbed one.
actually id recommend most ferrex tools. they are a cheap way of getting reasonable kit. the battery stuff is reputedly very good but ive no personal experience.
any one got any more?
-
- Forum Administrator
- Posts: 11009
- Joined: Mon Sep 03, 2012 9:51 pm
- RX-8: R3
- Colour: Sparkling Black
- Location: Caerphilly
- Has thanked: 47 times
- Been thanked: 155 times
Re: tool recommendations...
Einhell do some decent stuff for the money. How much was the Ferrex? Used to be able to get a 4.5" Makita angle grinder for about £40
John
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
-
- Forum Administrator
- Posts: 11009
- Joined: Mon Sep 03, 2012 9:51 pm
- RX-8: R3
- Colour: Sparkling Black
- Location: Caerphilly
- Has thanked: 47 times
- Been thanked: 155 times
Re: tool recommendations...
Yea. That's a good deal.
- These users thanked the author brix79 for the post:
- qwakers (Mon Sep 28, 2020 10:05 pm)
John
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
-
- Forum Moderator
- Posts: 9053
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: Turbo
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 97 times
- Been thanked: 539 times
Re: tool recommendations...
all ferrex stuff is really cheap, and you'd expect it to be crap until you realise its a mid range German domestic brand... so pretty much matches uk high end
-
- Forum Administrator
- Posts: 11009
- Joined: Mon Sep 03, 2012 9:51 pm
- RX-8: R3
- Colour: Sparkling Black
- Location: Caerphilly
- Has thanked: 47 times
- Been thanked: 155 times
Re: tool recommendations...
Aye, some of the Parkside kit is surprisingly good too, can't remember if that's Aldi or Lidl though. They're a German manufacturer too.
John
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
Forum Admin Team
2021- // 2009 Sparkling Black R3 | Pettit Exhaust | 20mm Eibachs
2017-21 // 2010 Aurora Blue R3 | Gone, never to return, never to be forgotten.
2011-17 // 2005 Titanium Grey 231 | Gone. But Lives(d?) on.
-
- Forum Moderator
- Posts: 9053
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: Turbo
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 97 times
- Been thanked: 539 times
Re: tool recommendations...
thats lidl, its not bad, but nothing like as good as ferrex. think its about inline with out diy level stuff.
-
- Spin Doctor
- Posts: 32536
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 444 times
- Been thanked: 2080 times
Re: tool recommendations...
We've got a Parkside hedge trimmer, multi-tool, and worklight that all use the same 12V battery packs.
The battery is tiny, just the size/shape of the multi-tool handle but the tools are powerful and the batteries last for ages.
Having 4 batteries means there's always a charged one ready to go.
I can't remember exactly how much they cost but it was less than a third of the DeWalt equivalent.
Sent from my SM-G800F using Tapatalk
The battery is tiny, just the size/shape of the multi-tool handle but the tools are powerful and the batteries last for ages.
Having 4 batteries means there's always a charged one ready to go.
I can't remember exactly how much they cost but it was less than a third of the DeWalt equivalent.
Sent from my SM-G800F using Tapatalk
-
- Club Member
- Posts: 1517
- Joined: Sat Jul 27, 2019 1:53 pm
- RX-8: 231
- Location: Basingstoke
- Has thanked: 34 times
- Been thanked: 40 times
Re: tool recommendations...
I've got a parkside impact gun. It works and hasn't set on fire, so gets my acceptance
-
- Club Member
- Posts: 2688
- Joined: Wed Nov 30, 2016 4:08 pm
- RX-8: 231
- Colour: Winning Blue
- Location: Wiltshire
- Has thanked: 10 times
- Been thanked: 57 times
Re: tool recommendations...
i have a ferrex drill and impact driver set, works well and i can use the impact driver for doing my wheel nuts without risking destroying everything.
Thanks, Stu
Mad as anything
Mad as anything