What have you done to your RX-8 today????
-
- Spin Doctor
- Posts: 32541
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 444 times
- Been thanked: 2080 times
Re: What have you done to your RX-8 today????
If the cooling was that marginal - like thrashing a highly tuned Transit across the desert - then it could make a difference.
However, our cars have twin oil coolers for marketing rather than engineering reasons*, and the airflow through the radiator shouldn't be an issue either.
Other than a major mechanical issue, coolant over-heating is much more likely to be caused by inappropriate placement of the front numberplate or loss of the rubber seals that should prevent the airflow from bypassing the radiator core.
*see viewtopic.php?f=30&t=53888
However, our cars have twin oil coolers for marketing rather than engineering reasons*, and the airflow through the radiator shouldn't be an issue either.
Other than a major mechanical issue, coolant over-heating is much more likely to be caused by inappropriate placement of the front numberplate or loss of the rubber seals that should prevent the airflow from bypassing the radiator core.
*see viewtopic.php?f=30&t=53888
- These users thanked the author warpc0il for the post:
- untakenname (Thu Aug 30, 2018 1:03 pm)
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
Looking at the size of the wire and holes then I would guess you could be looking at a c25% reduction in the open area.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Spin Doctor
- Posts: 32541
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 444 times
- Been thanked: 2080 times
Re: What have you done to your RX-8 today????
Having been involved with static testing of jet engines, often with mesh "safety screens" in the early days, I can advise that the reduction in airflow is actually more than the simple ratio between the wires and the holes.
We did a lot of work with Rolls Royce developing domed screens, where the total area of the holes was far greater than the open intake, and power above mid-throttle was still reduced.
However, I still believe that the benefits of protecting our oil cooler and radiator (actually the a/c heat-exchange) core, outweighs the reduction in airflow, unless you choose a mesh with too solid a construction.
We did a lot of work with Rolls Royce developing domed screens, where the total area of the holes was far greater than the open intake, and power above mid-throttle was still reduced.
However, I still believe that the benefits of protecting our oil cooler and radiator (actually the a/c heat-exchange) core, outweighs the reduction in airflow, unless you choose a mesh with too solid a construction.
- These users thanked the author warpc0il for the post:
- ChrisHolmes (Fri Aug 24, 2018 7:48 pm)
-
- Former Member
- Posts: 1749
- Joined: Thu Apr 17, 2014 10:34 pm
- Has thanked: 68 times
- Been thanked: 131 times
Re: What have you done to your RX-8 today????
Been completing lots of small mods all done then this carbon fibre ring came for the steering wheel so fitted it
thanks for taking the time to look
thanks for taking the time to look
-
- Former Member
- Posts: 1600
- Joined: Fri Jun 12, 2015 11:03 am
- RX-8: PZ
- Colour: Brilliant Black
- Location: Bishop's Stortford
- Has thanked: 30 times
- Been thanked: 28 times
Re: What have you done to your RX-8 today????
Snagged some spares for the PZ today.
In other news, car taxed and MoT'd, my bank account lighter by about £1,000 (damn you unnecessarily expensive road fund license and carbonfibre-effect braided brake pipes)!
Sent from my Nexus 7 using Tapatalk
In other news, car taxed and MoT'd, my bank account lighter by about £1,000 (damn you unnecessarily expensive road fund license and carbonfibre-effect braided brake pipes)!
Sent from my Nexus 7 using Tapatalk
"... for I am a stranger in a strange land!"
-
- Former Member
- Posts: 884
- Joined: Fri Jun 02, 2017 2:24 pm
- RX-8: 231
- Colour: Stormy Blue
- Location: France
- Has thanked: 35 times
- Been thanked: 73 times
Re: What have you done to your RX-8 today????
Changed the oil and filter today one year and 2000 miles since it was last done,
Also fitted an rb grill for the ac condenser it’s been on the shelf for a year so I thought I would fit it.
Also fitted an rb grill for the ac condenser it’s been on the shelf for a year so I thought I would fit it.
You do not have the required permissions to view the files attached to this post.
-
- Club Member
- Posts: 960
- Joined: Wed Jul 02, 2014 10:18 am
- RX-8: 231
- Colour: Kuro Black
- Location: London
- Has thanked: 71 times
- Been thanked: 90 times
Re: What have you done to your RX-8 today????
Raised rideheight a centimetre to park without grinding
You do not have the required permissions to view the files attached to this post.
-
- Club Member
- Posts: 1609
- Joined: Tue Sep 27, 2016 10:13 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Mid Glam
- Has thanked: 8 times
- Been thanked: 220 times
Re: What have you done to your RX-8 today????
Me and Tom my son gave her a good thrashing today @ Pembrey
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- These users thanked the author Neilparry for the post:
- ChrisHolmes (Sat Sep 01, 2018 11:08 pm)
-
- Former Member
- Posts: 22
- Joined: Sat Aug 25, 2018 7:37 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Mid Sussex
- Has thanked: 6 times
- Been thanked: 1 time
Re: What have you done to your RX-8 today????
Ever have any issues with police / mot testers re your number plate. It looks great and I’d like to do the same.untakenname wrote: ↑Sat Sep 01, 2018 9:44 pmRaised rideheight a centimetre to park without grinding
IMG_20180901_185231.jpg
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
Car is looking really good and you would never know what is in those headlights!untakenname wrote: ↑Sat Sep 01, 2018 9:44 pmRaised rideheight a centimetre to park without grinding
IMG_20180901_185231.jpg
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 960
- Joined: Wed Jul 02, 2014 10:18 am
- RX-8: 231
- Colour: Kuro Black
- Location: London
- Has thanked: 71 times
- Been thanked: 90 times
Re: What have you done to your RX-8 today????
Cheers, the left headlight is in direct sunlight so it looks a bit odd.
Bought it as a show plate via eBay, it's the correct size and spacing, dunno if it would pass the MOT as it doesn't have the BS mark, has a 3M reflective background.
Annoyingly I didn't align it correctly and it stuck instantly, may redo it at some point, think it maybe best to put on slightly wet with perhaps a drop of washing up liquid so can slide it a bit to get it symmetrical.
Was pulled by the police a couple of months back and they went over my car (ANPR showed no insurance and I had to prove I had the mods declared) but they didn't dwell on the front numberplate.SuperSeagull wrote: ↑Sat Sep 01, 2018 11:09 pmEver have any issues with police / mot testers re your number plate. It looks great and I’d like to do the same.untakenname wrote: ↑Sat Sep 01, 2018 9:44 pmRaised rideheight a centimetre to park without grinding
IMG_20180901_185231.jpg
Bought it as a show plate via eBay, it's the correct size and spacing, dunno if it would pass the MOT as it doesn't have the BS mark, has a 3M reflective background.
Annoyingly I didn't align it correctly and it stuck instantly, may redo it at some point, think it maybe best to put on slightly wet with perhaps a drop of washing up liquid so can slide it a bit to get it symmetrical.
- These users thanked the author untakenname for the post:
- SuperSeagull (Sun Sep 02, 2018 8:18 pm)
-
- Forum Moderator
- Posts: 9058
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: Turbo
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 99 times
- Been thanked: 539 times
Re: What have you done to your RX-8 today????
my plate is in the same place, as it was on my previous mr2. ive never had any trouble with the mot or the law.
Last edited by qwakers on Sun Sep 02, 2018 8:19 pm, edited 1 time in total.
- These users thanked the author qwakers for the post:
- SuperSeagull (Sun Sep 02, 2018 8:18 pm)
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
I had the same issue when I pout my plate there and certainly the washing up liquid makes it slide and its simples to align. Only issue I had was that when I tried to remove the plate it took the ;lacquer off with it so I recommend warming the plate slightly with hair drier.untakenname wrote: ↑Sat Sep 01, 2018 11:33 pmCheers, the left headlight is in direct sunlight so it looks a bit odd.
Was pulled by the police a couple of months back and they went over my car (ANPR showed no insurance and I had to prove I had the mods declared) but they didn't dwell on the front numberplate.SuperSeagull wrote: ↑Sat Sep 01, 2018 11:09 pmEver have any issues with police / mot testers re your number plate. It looks great and I’d like to do the same.untakenname wrote: ↑Sat Sep 01, 2018 9:44 pmRaised rideheight a centimetre to park without grinding
IMG_20180901_185231.jpg
Bought it as a show plate via eBay, it's the correct size and spacing, dunno if it would pass the MOT as it doesn't have the BS mark, has a 3M reflective background.
Annoyingly I didn't align it correctly and it stuck instantly, may redo it at some point, think it maybe best to put on slightly wet with perhaps a drop of washing up liquid so can slide it a bit to get it symmetrical.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 4245
- Joined: Wed Dec 02, 2015 7:04 pm
- RX-8: 231
- Colour: Copper Red
- Location: Hengoed - South Wales
- Has thanked: 113 times
- Been thanked: 158 times
Re: What have you done to your RX-8 today????
Me tooNeilparry wrote:Me and Tom my son gave her a good thrashing today @ Pembrey
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
Flaming hell Wayne what do you put in your tank, rocket fuel?
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 4245
- Joined: Wed Dec 02, 2015 7:04 pm
- RX-8: 231
- Colour: Copper Red
- Location: Hengoed - South Wales
- Has thanked: 113 times
- Been thanked: 158 times
Re: What have you done to your RX-8 today????
Certainly not 2t oil as it looks like I ran my sohn dry on the last outing ........ChrisHolmes wrote:Flaming hell Wayne what do you put in your tank, rocket fuel?
Just hope that 200 ml of pre mixing in 20 litres of fuel was sufficient not to have harmed the engine .....
Time to dig out what type of oil level indicator I can put on the sohn tank
Sent from my iPhone using Tapatalk
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
Two compressed air elbows and a bit of tubing (I have some left), drill and tap 2 holes in the tank and your done.mrspiller wrote: ↑Sun Sep 02, 2018 10:26 amCertainly not 2t oil as it looks like I ran my sohn dry on the last outing ........ChrisHolmes wrote:Flaming hell Wayne what do you put in your tank, rocket fuel?
Just hope that 200 ml of pre mixing in 20 litres of fuel was sufficient not to have harmed the engine .....
Time to dig out what type of oil level indicator I can put on the sohn tank
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 4245
- Joined: Wed Dec 02, 2015 7:04 pm
- RX-8: 231
- Colour: Copper Red
- Location: Hengoed - South Wales
- Has thanked: 113 times
- Been thanked: 158 times
Re: What have you done to your RX-8 today????
I have a clear bottle , I need a buzzer or a light to remind me to fill it .........ChrisHolmes wrote:Two compressed air elbows and a bit of tubing (I have some left), drill and tap 2 holes in the tank and your done.mrspiller wrote: ↑Sun Sep 02, 2018 10:26 amCertainly not 2t oil as it looks like I ran my sohn dry on the last outing ........ChrisHolmes wrote:Flaming hell Wayne what do you put in your tank, rocket fuel?
Just hope that 200 ml of pre mixing in 20 litres of fuel was sufficient not to have harmed the engine .....
Time to dig out what type of oil level indicator I can put on the sohn tank
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Former Member
- Posts: 1216
- Joined: Fri Feb 12, 2016 6:18 pm
- RX-8: 231
- Location: Henley-on-Thames
- Has thanked: 18 times
- Been thanked: 78 times
Re: What have you done to your RX-8 today????
Was getting ready for my trip to nurburgring, took bumper off to sort a few niggles and spotted this:
Looks like Ryan Rotary are getting more of my money as not risking an oil line going either killing my engine or people on track
Looks like Ryan Rotary are getting more of my money as not risking an oil line going either killing my engine or people on track
You do not have the required permissions to view the files attached to this post.
2007 Galaxy grey 231.
RRP Parts: Full bridge, long tube header, cofs + tanks, pulleys, engine mounts, oil injectors, remap, race cat.
Other: Greddy sump, Autoexe exhaust, autoexe brake brace, ingalls engine brace, ultra racing f+r strut brace, hsd coilovers, whiteline Arbs, 4 pot brakes, r3 Diff, r3 interior and lots more
RRP Parts: Full bridge, long tube header, cofs + tanks, pulleys, engine mounts, oil injectors, remap, race cat.
Other: Greddy sump, Autoexe exhaust, autoexe brake brace, ingalls engine brace, ultra racing f+r strut brace, hsd coilovers, whiteline Arbs, 4 pot brakes, r3 Diff, r3 interior and lots more
-
- Club Member
- Posts: 28286
- Joined: Sun Jan 29, 2006 10:04 pm
- Location: Cheltenham
- Has thanked: 2568 times
- Been thanked: 940 times
Re: What have you done to your RX-8 today????
Just pop the bonnet after every session on track and top it up, it soon becomes a habit.mrspiller wrote: ↑Sun Sep 02, 2018 3:57 pmI have a clear bottle , I need a buzzer or a light to remind me to fill it .........ChrisHolmes wrote:Two compressed air elbows and a bit of tubing (I have some left), drill and tap 2 holes in the tank and your done.mrspiller wrote: ↑Sun Sep 02, 2018 10:26 am
Certainly not 2t oil as it looks like I ran my sohn dry on the last outing ........
Just hope that 200 ml of pre mixing in 20 litres of fuel was sufficient not to have harmed the engine .....
Time to dig out what type of oil level indicator I can put on the sohn tank
Sent from my iPhone using Tapatalk
2018-09-02.png
Sent from my iPhone using Tapatalk
Rotary History;
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
-
- Club Member
- Posts: 4245
- Joined: Wed Dec 02, 2015 7:04 pm
- RX-8: 231
- Colour: Copper Red
- Location: Hengoed - South Wales
- Has thanked: 113 times
- Been thanked: 158 times
Re: What have you done to your RX-8 today????
I normally do but was contending with a diff oil leak so kind of distracted me ...........ChrisHolmes wrote:Just pop the bonnet after every session on track and top it up, it soon becomes a habit.mrspiller wrote: ↑Sun Sep 02, 2018 3:57 pmI have a clear bottle , I need a buzzer or a light to remind me to fill it .........ChrisHolmes wrote: Two compressed air elbows and a bit of tubing (I have some left), drill and tap 2 holes in the tank and your done.
2018-09-02.png
Sent from my iPhone using Tapatalk
Anyone know of an electronic sensor I could use
Sent from my iPhone using Tapatalk
-
- Club Member
- Posts: 2496
- Joined: Thu Mar 06, 2008 12:29 am
- RX-8: 231
- Colour: Sunlight Silver
- Location: Coventry
- Has thanked: 170 times
- Been thanked: 521 times
Re: What have you done to your RX-8 today????
If you have a sohn fitted you could use a regular oil level sensor (the one the car uses to tell you it's low) and connect it in place of the sump level one.
-
- Former Member
- Posts: 1391
- Joined: Sun Jun 11, 2017 1:25 pm
- RX-8: 231
- Colour: Galaxy Grey
- Location: Newport
- Has thanked: 33 times
- Been thanked: 38 times
Re: What have you done to your RX-8 today????
Doing the washing up in the kitchen
Only have exhaust, coilovers and oil cooler lines to fit... Need to start fitting things before I buy more
Only have exhaust, coilovers and oil cooler lines to fit... Need to start fitting things before I buy more
You do not have the required permissions to view the files attached to this post.
- These users thanked the author wiggles for the post:
- AdamGaltress (Sun Sep 02, 2018 8:04 pm)
Project thread Galaxy grey 231 - Street Port, Tein coilovers, decat, D585's, Cobra Catback whatever 9j wheels aren't broken at the moment and a massive wing
-
- Club Member
- Posts: 4245
- Joined: Wed Dec 02, 2015 7:04 pm
- RX-8: 231
- Colour: Copper Red
- Location: Hengoed - South Wales
- Has thanked: 113 times
- Been thanked: 158 times
Re: What have you done to your RX-8 today????
Happy days , I have a spare , I guess I could get someone to bodge the wiringPaulAV wrote:If you have a sohn fitted you could use a regular oil level sensor (the one the car uses to tell you it's low) and connect it in place of the sump level one.
Sent from my iPhone using Tapatalk
-
- Former Member
- Posts: 4875
- Joined: Tue Feb 04, 2014 11:04 pm
- RX-8: Evolve
- Colour: Copper Red
- Location: South Linc's
- Has thanked: 22 times
- Been thanked: 28 times
Re: What have you done to your RX-8 today????
Nice exhaust you have there
AdamGaltress
Events Team & Comms Team
JDM RX-7 FD - Project Thread
Bridgeport Copper Red MazdaSpeed Evolve - Project Thread - Parted out
Events Team & Comms Team
JDM RX-7 FD - Project Thread
Bridgeport Copper Red MazdaSpeed Evolve - Project Thread - Parted out