Bought my Kuro back in February of this year and figured it was about time I joined up and said hello.
It's the first RX-8 i've owned so i'm new to the rotary life
Hello! New Kuro owner
-
- Forum Guest
- Posts: 3
- Joined: Thu May 12, 2022 11:37 am
- RX-8: Kuro
- Colour: Kuro Black
- Location: Hampshire
- Has thanked: 1 time
- Been thanked: 1 time
Hello! New Kuro owner
Last edited by KuroKid on Thu May 12, 2022 12:25 pm, edited 2 times in total.
- These users thanked the author KuroKid for the post:
- wreeve (Thu May 12, 2022 5:25 pm)
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
Hello! New Kuro owner
Hi & to the RX-8OC
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
-
- Former Member
- Posts: 233
- Joined: Sat May 01, 2021 1:49 pm
- RX-8: Kuro
- Colour: Kuro Black
- Location: Norfolk
- Has thanked: 39 times
- Been thanked: 15 times
Re: Hello! New Kuro owner
I was the same a little over a year ago! It's been fun! Welcome to the mad club!
-
- Events Team Member
- Posts: 12602
- Joined: Sun Jun 27, 2004 7:14 pm
- RX-8: 231
- Colour: Titanium Grey
- Location: Colchester
- Has thanked: 507 times
- Been thanked: 451 times
Re: Hello! New Kuro owner
to the wacky world of the wankel
Essex Rotary Full Bridgeport
Seibon Carbon Fibre Bonnet, "Racing Brake" front calipers, Racing Beat (RB) ARB's F&R, RB REVI intake, full RB Stainless Steel Exhaust & Mani, 20mm Eibach spacers, KOYO Ali Rad, Lightened Fly, Tein MonoFlex coilovers & strut brace, Axial short-shifter, BHR Coils & Engine Mounts, Greddy Sump
Federal 595RS-R or Rainsport 3
Seibon Carbon Fibre Bonnet, "Racing Brake" front calipers, Racing Beat (RB) ARB's F&R, RB REVI intake, full RB Stainless Steel Exhaust & Mani, 20mm Eibach spacers, KOYO Ali Rad, Lightened Fly, Tein MonoFlex coilovers & strut brace, Axial short-shifter, BHR Coils & Engine Mounts, Greddy Sump
Federal 595RS-R or Rainsport 3
-
- Forum Moderator
- Posts: 32772
- Joined: Tue Sep 12, 2006 1:54 am
- RX-8: 192
- Colour: Sunlight Silver
- Location: Kent (out in the sticks - nothing urban here)
- Has thanked: 266 times
- Been thanked: 320 times
Re: Hello! New Kuro owner
Hi and KuroKid. Have a good read through whatever in the FAQ section you didn't already read and then (and just ignore me if you know all this already) here are my best tips for keeping it all running sweetly:
1. To start up turn the key to position 2, wait for most of the lights on the dash to go out (I watch the airbag light by the glove box), press the clutch to the floor (optional, but reduces drag), turn the key to start and do not touch the throttle until it has started. You can drive off straight away, just keep the revs down for a bit (see #4 below).
2. Never turn off the engine before it has reached at least somewhere towards normal operating temperature (should only take a minute or two, but best to go for a short drive if just swapping cars round on the drive etc). Switching off cold risks flooding, which is a real with a rotary engine. Mazda recommend rev to 4k and hold it for 8-10 seconds switching off while still revving if you have no option but to switch off cold (it is not necessary to do this in any other circumstance).
3. Check the oil level regularly (use the dipstick - the oil gauge tells you nothing other than that you have or don't have pressure) and top up if necessary with semi synthetic 5w30 (most people and specialists are advising to use 10w40 now though) ... small amounts at a time, no more than ½ a litre then check the level again before adding more as you don't want to overfill it.
4. Use all the revs once the engine is nice and warm (don't sit idling to warm up, start up and drive but keep it below about 4k until the needle on the water temperature gauge is pointing straight up, then give it another 10 minutes for the oil to warm up too before really thrashing it and hit the beep often. Best acceleration is from 4k revs up - to pull away you really need to rev to 2k - you can let the revs drop after lifting the clutch if you are in traffic, cruising steadily at 3½k revs and changing down to go up hills or accelerate gets you the best mpg ... which still won't be great.
5. Join the club for discounts on all sorts of things (you will very quickly get the cost of membership back - and then some), loads more info in the members only sections (including access to all the workshop and technical manuals), local meets (they were all postponed but have been starting up again recently) - if you can't find one exactly local it is a good excuse for a drive if you come to one a bit further away), a sexy keyring just for joining and more.
1. To start up turn the key to position 2, wait for most of the lights on the dash to go out (I watch the airbag light by the glove box), press the clutch to the floor (optional, but reduces drag), turn the key to start and do not touch the throttle until it has started. You can drive off straight away, just keep the revs down for a bit (see #4 below).
2. Never turn off the engine before it has reached at least somewhere towards normal operating temperature (should only take a minute or two, but best to go for a short drive if just swapping cars round on the drive etc). Switching off cold risks flooding, which is a real with a rotary engine. Mazda recommend rev to 4k and hold it for 8-10 seconds switching off while still revving if you have no option but to switch off cold (it is not necessary to do this in any other circumstance).
3. Check the oil level regularly (use the dipstick - the oil gauge tells you nothing other than that you have or don't have pressure) and top up if necessary with semi synthetic 5w30 (most people and specialists are advising to use 10w40 now though) ... small amounts at a time, no more than ½ a litre then check the level again before adding more as you don't want to overfill it.
4. Use all the revs once the engine is nice and warm (don't sit idling to warm up, start up and drive but keep it below about 4k until the needle on the water temperature gauge is pointing straight up, then give it another 10 minutes for the oil to warm up too before really thrashing it and hit the beep often. Best acceleration is from 4k revs up - to pull away you really need to rev to 2k - you can let the revs drop after lifting the clutch if you are in traffic, cruising steadily at 3½k revs and changing down to go up hills or accelerate gets you the best mpg ... which still won't be great.
5. Join the club for discounts on all sorts of things (you will very quickly get the cost of membership back - and then some), loads more info in the members only sections (including access to all the workshop and technical manuals), local meets (they were all postponed but have been starting up again recently) - if you can't find one exactly local it is a good excuse for a drive if you come to one a bit further away), a sexy keyring just for joining and more.
'Grington.
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
-
- Forum Guest
- Posts: 3
- Joined: Thu May 12, 2022 11:37 am
- RX-8: Kuro
- Colour: Kuro Black
- Location: Hampshire
- Has thanked: 1 time
- Been thanked: 1 time
Re: Hello! New Kuro owner
Thank you for the welcome everyone, and much appreciation for all the advice there Shagrington.