Hi All,
Just thought I'd introduce myself as I'm now a member of the RX8 community having recently purchased a 40th anniversary edition RX8 from one of the members on here (Horsey1642). The car seems to be a good one which has been well looked after and includes plenty of service history. It's pretty much stock, apart from a Bilstein B12 suspension kit, de-cat and uprated coils / leads.
I've had quite a few performance cars over my past 14 years of driving, but decided it was time to finally join the rotary club I'm looking forward to getting some good use out of the car this summer with a few track days thrown in to test its full potential.
My plans for the car are quite basic at the moment, although this will more than likely change, as they do with any project car
1st Time Rotary Owner - South Wales
-
- Former Member
- Posts: 4
- Joined: Wed Apr 20, 2022 9:27 pm
- RX-8: 40th Anniversary
- Colour: Metropolitan Grey
- Location: South Wales
- Has thanked: 4 times
- Been thanked: 3 times
1st Time Rotary Owner - South Wales
- These users thanked the author smash for the post (total 3):
- nightfire10 (Tue May 03, 2022 9:45 pm) • casey (Tue May 03, 2022 10:17 pm) • wreeve (Wed May 04, 2022 8:37 pm)
-
- Former Member
- Posts: 64953
- Joined: Sun Dec 10, 2006 6:57 pm
- Location: Somewhere in the UK
- Has thanked: 1581 times
- Been thanked: 365 times
1st Time Rotary Owner - South Wales
Hi & to the RX-8OC
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
Please check out the EVENTS SECTION's for anything coming up soon in your area
Events Team
- These users thanked the author GreySilver Beast for the post:
- smash (Wed May 04, 2022 10:10 pm)
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
-
- Club Member
- Posts: 6743
- Joined: Tue Jun 28, 2011 9:22 pm
- RX-8: 231
- Colour: Brilliant Black
- Location: Cotswolds
- Has thanked: 26 times
- Been thanked: 310 times
Re: 1st Time Rotary Owner - South Wales
Hi Smash and welcome to the club
There’s a few rotaries in South Wales who also do track days, I’m sure you’ll meet them soon
Nice car you have there
Regards
Pete
There’s a few rotaries in South Wales who also do track days, I’m sure you’ll meet them soon
Nice car you have there
Regards
Pete
- These users thanked the author Conan for the post:
- smash (Wed May 04, 2022 10:10 pm)
-
- Forum Moderator
- Posts: 32772
- Joined: Tue Sep 12, 2006 1:54 am
- RX-8: 192
- Colour: Sunlight Silver
- Location: Kent (out in the sticks - nothing urban here)
- Has thanked: 266 times
- Been thanked: 320 times
Re: 1st Time Rotary Owner - South Wales
Hi and smash. Have a good read through whatever in the FAQ section you didn't already read and then (and just ignore me if you know all this already) here are my best tips for keeping it all running sweetly:
1. To start up turn the key to position 2, wait for most of the lights on the dash to go out (I watch the airbag light by the glove box), press the clutch to the floor (optional, but reduces drag), turn the key to start and do not touch the throttle until it has started. You can drive off straight away, just keep the revs down for a bit (see #4 below).
2. Never turn off the engine before it has reached at least somewhere towards normal operating temperature (should only take a minute or two, but best to go for a short drive if just swapping cars round on the drive etc). Switching off cold risks flooding, which is a real with a rotary engine. Mazda recommend rev to 4k and hold it for 8-10 seconds switching off while still revving if you have no option but to switch off cold (it is not necessary to do this in any other circumstance).
3. Check the oil level regularly (use the dipstick - the oil gauge tells you nothing other than that you have or don't have pressure) and top up if necessary with semi synthetic 5w30 (most people and specialists are advising to use 10w40 now though) ... small amounts at a time, no more than ½ a litre then check the level again before adding more as you don't want to overfill it.
4. Use all the revs once the engine is nice and warm (don't sit idling to warm up, start up and drive but keep it below about 4k until the needle on the water temperature gauge is pointing straight up, then give it another 10 minutes for the oil to warm up too before really thrashing it and hit the beep often. Best acceleration is from 4k revs up - to pull away you really need to rev to 2k - you can let the revs drop after lifting the clutch if you are in traffic, cruising steadily at 3½k revs and changing down to go up hills or accelerate gets you the best mpg ... which still won't be great.
5. Join the club for discounts on all sorts of things (you will very quickly get the cost of membership back - and then some), loads more info in the members only sections (including access to all the workshop and technical manuals), local meets (they were all postponed but have been starting up again recently) - if you can't find one exactly local it is a good excuse for a drive if you come to one a bit further away), a sexy keyring just for joining and more.
1. To start up turn the key to position 2, wait for most of the lights on the dash to go out (I watch the airbag light by the glove box), press the clutch to the floor (optional, but reduces drag), turn the key to start and do not touch the throttle until it has started. You can drive off straight away, just keep the revs down for a bit (see #4 below).
2. Never turn off the engine before it has reached at least somewhere towards normal operating temperature (should only take a minute or two, but best to go for a short drive if just swapping cars round on the drive etc). Switching off cold risks flooding, which is a real with a rotary engine. Mazda recommend rev to 4k and hold it for 8-10 seconds switching off while still revving if you have no option but to switch off cold (it is not necessary to do this in any other circumstance).
3. Check the oil level regularly (use the dipstick - the oil gauge tells you nothing other than that you have or don't have pressure) and top up if necessary with semi synthetic 5w30 (most people and specialists are advising to use 10w40 now though) ... small amounts at a time, no more than ½ a litre then check the level again before adding more as you don't want to overfill it.
4. Use all the revs once the engine is nice and warm (don't sit idling to warm up, start up and drive but keep it below about 4k until the needle on the water temperature gauge is pointing straight up, then give it another 10 minutes for the oil to warm up too before really thrashing it and hit the beep often. Best acceleration is from 4k revs up - to pull away you really need to rev to 2k - you can let the revs drop after lifting the clutch if you are in traffic, cruising steadily at 3½k revs and changing down to go up hills or accelerate gets you the best mpg ... which still won't be great.
5. Join the club for discounts on all sorts of things (you will very quickly get the cost of membership back - and then some), loads more info in the members only sections (including access to all the workshop and technical manuals), local meets (they were all postponed but have been starting up again recently) - if you can't find one exactly local it is a good excuse for a drive if you come to one a bit further away), a sexy keyring just for joining and more.
- These users thanked the author Shagrington for the post:
- smash (Wed May 04, 2022 10:10 pm)
'Grington.
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)
former Club Treasurer 2010-18 (now finally retired)
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired)