Hello from a prospective buyer

A chance to introduce yourself...
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Hello from a prospective buyer

Post by Adam41 »

Hi there.

I've been wanting to buy a new car for a while, something sporty whilst I'm still 'young', but never really set my sights on a particular model. Then a friend suggested an RX8 and I've been on the lookout for a few weeks now.

I've done quite a bit reading on the costs of maintaining and running an 8 and for the small amount of miles I'll be doing a year should be good bang for the buck.

I've decided on an R3 as I think they still look great for a 10 year old car.

Having read the buyers guide here, I think I'm glued up on what to look for when searching and hopefully eventually buying one, but are there any other tips anyone could give? Apart from the usual places, is there anywhere else I should keep an eye on for an R3 to pop up?

I'm not in a rush to buy one so don't mind waiting for the right one to come along. Although I have noticed most on sale online are either down south or in Scotland!

Cheers
Adam
User avatar
Shagrington
Forum Moderator
Forum Moderator
Posts: 32772
Joined: Tue Sep 12, 2006 1:54 am
RX-8: 192
Colour: Sunlight Silver
Location: Kent (out in the sticks - nothing urban here)
Has thanked: 266 times
Been thanked: 320 times

Re: Hello from a prospective buyer

Post by Shagrington »

Hi and :welcome: Adam. :D Well done on doing the reading first =D> ... the buyers guide gives you pretty much everything you'll need to know when you're looking at cars. I have some tips intended to help keep it running sweetly once you get one, but nothing more on what to look for when you are on the hunt. I will just say there are less R3s about so don't completely rule out a well looked after series 1 if the R3 for you doesn't materialise.
These users thanked the author Shagrington for the post:
Adam41 (Sun Jul 21, 2019 9:45 am)
'Grington.
former Club Treasurer 2010-18 (now finally retired) \:D/
Silver 192 green interior LEDS, Nordic Green hoop spoiler, roof inserts and wheels Silver Stripes (now finally retired) :cry:
goodeggbob
Club Member
Club Member
Posts: 16896
Joined: Sun Feb 18, 2018 1:12 pm
RX-8: Kuro
Colour: Kuro Black
Location: oswestry shropshire
Has thanked: 219 times
Been thanked: 347 times

Re: Hello from a prospective buyer

Post by goodeggbob »

Hi Adam, welcome along. when looking for a car,try ,within reason,not to let the distance put you off. you will probably only do this once,so get it right first time,also corrosion has become more of a check over the last couple of years,and is not confined to just the s1 any more.good luck,rob.
These users thanked the author goodeggbob for the post:
Adam41 (Sun Jul 21, 2019 11:40 am)
Rob :thumright:
User avatar
acegeezer
Former Member
Former Member
Posts: 5843
Joined: Thu Feb 20, 2014 1:40 pm
RX-8: R3
Colour: Sparkling Black
Location: East Coast - Lincolnshire
Has thanked: 101 times
Been thanked: 83 times

Re: Hello from a prospective buyer

Post by acegeezer »

Hi and :welcome: to the forum Adam.. please do read everything you can about these cars and good luck with your search, the R3 is worth the effort.. but then I could be biased :thumleft:
These users thanked the author acegeezer for the post:
Adam41 (Sun Jul 21, 2019 11:40 am)
John
R3-2009 "Sparkling Black" .. Gone but never to be forgotten 8)

New kid on the block .. Renault Megane RS 265 Diamond Black 2012 .. immaculate .. and quick :thumleft: Plus Honda CRV for the Dobermanns' :D
User avatar
GreySilver Beast
Former Member
Former Member
Posts: 64953
Joined: Sun Dec 10, 2006 6:57 pm
Location: Somewhere in the UK
Has thanked: 1581 times
Been thanked: 365 times

Hello from a prospective buyer

Post by GreySilver Beast »

Hi Adam & :welcome: to the RX-8OC :thumleft:


Please check out the EVENTS SECTION's for anything coming up soon in your area :thumleft:

Events Team
GreySilver Beast-Test Drives Unlimited (Nigel)
Club Member from 2006 - present
Events Team from 2015 - 2024
Events Coordinator from 2017 - 2023
Administrator from 2012 - present RX-8 Owners Club UK
Tesla M3LR AB 363 AWD " Blue Beast "
User avatar
AaronM1991
Former Member
Former Member
Posts: 76
Joined: Fri Feb 15, 2019 8:43 pm
RX-8: 231
Colour: Velocity Red
Location: Rochester
Has thanked: 4 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by AaronM1991 »

Welcome Adam! :thumleft:
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

I'm still looking!

I messaged one guy about his for sale, and he said the compression test results were front 6.4 and rear 7.2, done by a specialist. Is it concerning that there is a large difference between front and rear?
User avatar
Ollie
Committee Member
Committee Member
Posts: 5275
Joined: Sat Apr 13, 2019 6:40 pm
RX-8: 231
Colour: Custom
Location: Cider Country
Has thanked: 11 times
Been thanked: 280 times

Re: Hello from a prospective buyer

Post by Ollie »

That big of a difference if memory serves me right isn't going to be killer. I could be wrong here, but I think you want the chambers to ideally be within 1.0 if each other or that could be each apex seal. Ask which specialist did the compression test for the sake of it as well as ask for the none averaged compression aka there should be three numbers for the front and three numbers for the rear rotor.
These users thanked the author Ollie for the post:
Adam41 (Tue Sep 10, 2019 8:43 am)
Club Treasurer

Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress


For whats pending... See here: viewtopic.php?f=204&t=86071
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

I'm viewing an R3 in Birmingham tomorrow.

A bit of a cheeky request, but is any member close by available to check out the car with me?

I've read a lot about what to look out for when buying one but I think having an owner's opinion is invaluable.

Thank you very much!
Adam
User avatar
warpc0il
Spin Doctor
Spin Doctor
Posts: 32537
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 444 times
Been thanked: 2080 times

Re: Hello from a prospective buyer

Post by warpc0il »

Not that cheeky a request and many owners are up for this, at least in principle.

"Tomorrow" might be a bit of a stretch due to the late notice.

Try looking here, here and here for members that might be close enough and then try a couple of PM's
These users thanked the author warpc0il for the post:
Adam41 (Fri Sep 20, 2019 8:12 pm)
Dave
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ
User avatar
acegeezer
Former Member
Former Member
Posts: 5843
Joined: Thu Feb 20, 2014 1:40 pm
RX-8: R3
Colour: Sparkling Black
Location: East Coast - Lincolnshire
Has thanked: 101 times
Been thanked: 83 times

Re: Hello from a prospective buyer

Post by acegeezer »

Have you 'found' one Adam?
John
R3-2009 "Sparkling Black" .. Gone but never to be forgotten 8)

New kid on the block .. Renault Megane RS 265 Diamond Black 2012 .. immaculate .. and quick :thumleft: Plus Honda CRV for the Dobermanns' :D
User avatar
SeeJay
Former Member
Former Member
Posts: 3835
Joined: Fri Aug 09, 2013 2:17 pm
RX-8: R3
Colour: Sparkling Black
Location: Nottingham
Has thanked: 41 times
Been thanked: 109 times

Re: Hello from a prospective buyer

Post by SeeJay »

Adam,where in Nottingham are you :?: ;)
2008 Sparkling Black R3 Japspeed Sportcat & Toyo Catback Drilled/grooved discs Simota Induction Kit D585 Coils Braided S/S lines Polished Engine Bay DRL's 2011 Spec Gearbox LED Side & fogs Calibre GT-R rims Michelin Pilot Sport 3 255/35 19 Nissan GTR spoiler RacingBeat ARB's Tein coilovers BHR motor mounts Amemiya Grille CL RC5 pads
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

John, hopefully!

SeeJay, I live in Arnold.

I saw it today and basically checked everything the buyers good told me to. :D

It started hot and cold. At idle when it was warm, the revs were very stable but I felt a few vibrations through the chair every now and again. I'm not sure if it was me looking out for it. The guy said he thinks it could be the transmission? It revved out nicely.

The only other worry was that the front right tyre loses pressure really slowly over a period of a week, despite them being new tyres. He said he had the same issue with a different tyre and the issue was actually the new tyre not being fitted to the rim properly. I don't know if this is actually possible?

Apart from that, it just needs a compression test. I want to buy it asap but need to find somewhere to get it compression tested. I made some calls and I think tomorrow is out of the equation. The owner is free Monday to get it tested, I just need to make some more calls Monday morning to see if anywhere can do it there and then (probably a slim chance! :))
These users thanked the author Adam41 for the post:
acegeezer (Sat Sep 21, 2019 8:32 pm)
User avatar
SeeJay
Former Member
Former Member
Posts: 3835
Joined: Fri Aug 09, 2013 2:17 pm
RX-8: R3
Colour: Sparkling Black
Location: Nottingham
Has thanked: 41 times
Been thanked: 109 times

Re: Hello from a prospective buyer

Post by SeeJay »

Adam,I'm just over in Gedling,mate :thumleft:

RX8's tend to have a bit of a 'lumpy' idle,which is what you were most likely experiencing.

Check the rim itself with the tyre that keeps going down - look for any signs of an impact having been hammered out,both outside and inside the rim.

If the owner is willing to bring the car to somewhere to have it comp tested,then Nick Black - 13Black on here - may be able to do it.He's based in Wymeswold.
These users thanked the author SeeJay for the post:
Adam41 (Sat Sep 21, 2019 8:30 pm)
2008 Sparkling Black R3 Japspeed Sportcat & Toyo Catback Drilled/grooved discs Simota Induction Kit D585 Coils Braided S/S lines Polished Engine Bay DRL's 2011 Spec Gearbox LED Side & fogs Calibre GT-R rims Michelin Pilot Sport 3 255/35 19 Nissan GTR spoiler RacingBeat ARB's Tein coilovers BHR motor mounts Amemiya Grille CL RC5 pads
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

Oh nice mate! Hopefully I will pop round if I get it just to see another 8 up close (today was the first one I'd test drove).

Thanks for the info. I didn't check the inside of the rim, but the outside looked alright apart from the usual wear.

I've pm'd him, cheers!
These users thanked the author Adam41 for the post:
acegeezer (Sat Sep 21, 2019 8:32 pm)
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

Test results... I noticed the crank speeds are higher than they should be. HME said it was a healthy engine and that it needs new spark plugs which would improve the results. Do you think it is worth going for?

https://imageshack.us/i/pos8sL70j
User avatar
warpc0il
Spin Doctor
Spin Doctor
Posts: 32537
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 444 times
Been thanked: 2080 times

Re: Hello from a prospective buyer

Post by warpc0il »

The crank speeds would be "as measured" which is fine for the raw data.

You need to either run those numbers through an app to "normalise to 250rpm" or just check against the graph in the compression thread in the forum FAQ

Sent from my SM-G800F using Tapatalk

Dave
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ
User avatar
Ray888
Former Member
Former Member
Posts: 388
Joined: Mon Dec 15, 2014 11:37 pm
RX-8: R3
Colour: Aluminium Silver
Location: Cambridgeshire
Has thanked: 0
Been thanked: 3 times

Re: Hello from a prospective buyer

Post by Ray888 »

If all else fails Adam, my one is still available in the for sale section ;)
偉 文
Ray
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

Normalising the results at 250rpm it comes out at low 5s front and mid 5s rear which isn't great. But the seller has said because HME Rotary used a digital reading to get the direct PSI readings, you need to adjust the numbers to get the maximum PSI readings. In his adjusted results, the results come out with 6s and 7s.

Does anyone know what he could be on about? To be fair the HME said the engine is healthy and new spark plugs would improve the results. How much would this improve results by?

Ray - unfortunately I'm looking for more of a stock one. I think my insurance would also be really high with yours!
User avatar
Nickp47
Club Member
Club Member
Posts: 2256
Joined: Sat May 07, 2016 9:00 pm
RX-8: R3
Colour: Sparkling Black
Location: Maidenhead
Has thanked: 174 times
Been thanked: 323 times

Re: Hello from a prospective buyer

Post by Nickp47 »

Do you have the actual figures, if so post them up
User avatar
Ollie
Committee Member
Committee Member
Posts: 5275
Joined: Sat Apr 13, 2019 6:40 pm
RX-8: 231
Colour: Custom
Location: Cider Country
Has thanked: 11 times
Been thanked: 280 times

Re: Hello from a prospective buyer

Post by Ollie »

Results normalised using http://foxed.ca/index.php?page=rotarycalc @ 250RPM 99m/324Ft elevation:

Front:

7.25
7.18
7.39

Rear:

6.08
6.08
6.08

Thats a fair difference in front/rear rotors. It might be outside of the safe amount because off the top of my head I can't remember the exact figure you want your chambers to be within. Unless I've done something wrong but those figures seem pretty right to me.

Edit: Ignore these results they're incorrect Petes on the next page are much more accurate!
Last edited by Ollie on Mon Sep 23, 2019 4:24 pm, edited 1 time in total.
Club Treasurer

Kentaro The Red - Sadly fallen...
Star Platinum - Work in progress


For whats pending... See here: viewtopic.php?f=204&t=86071
Adam41
Former Member
Former Member
Posts: 47
Joined: Sat Jul 20, 2019 11:24 pm
Location: Nottingham
Has thanked: 11 times
Been thanked: 4 times

Re: Hello from a prospective buyer

Post by Adam41 »

Having problems attaching the pic, but a link to imageshack is a few posts above.
Last edited by Adam41 on Mon Sep 23, 2019 4:14 pm, edited 3 times in total.
User avatar
Nickp47
Club Member
Club Member
Posts: 2256
Joined: Sat May 07, 2016 9:00 pm
RX-8: R3
Colour: Sparkling Black
Location: Maidenhead
Has thanked: 174 times
Been thanked: 323 times

Re: Hello from a prospective buyer

Post by Nickp47 »

Sorry, had missed your earlier post with results
GraemeC
Club Member
Club Member
Posts: 147
Joined: Sun Apr 03, 2016 1:25 pm
RX-8: PZ
Colour: Brilliant Black
Location: Sunny Cheshire!
Has thanked: 7 times
Been thanked: 19 times

Re: Hello from a prospective buyer

Post by GraemeC »

Adam41 wrote:
Mon Sep 23, 2019 2:31 pm
To be fair the HME said the engine is healthy and new spark plugs would improve the results. How much would this improve results by?
Humm.... :roll: :roll: :roll:

Maybe someone more educated can comment on this, I cannot think of any sensible reason why new spark plugs would improve compression!
User avatar
warpc0il
Spin Doctor
Spin Doctor
Posts: 32537
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 444 times
Been thanked: 2080 times

Re: Hello from a prospective buyer

Post by warpc0il »

BS-meter.jpg
You do not have the required permissions to view the files attached to this post.
Dave
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ