Removing/replacing R3 sill skirts

Area for car DIY ideas and how-to's - NOT questions.
Fitting strakes, taking the bumper off, or changing exhaust...
Post Reply
User avatar
Spin Doctor
Spin Doctor
Posts: 24831
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 407 times
Been thanked: 1633 times

Removing/replacing R3 sill skirts

Post by warpc0il » Tue Dec 31, 2019 12:15 am

This from another thread, quoted here for future reference...
New Duke wrote:
Mon Dec 30, 2019 11:57 pm

When my (side) skirts came off the guy doing it explained that they can be simply pushed back in, but in order to get them off you have to push/nudge them forwards towards the bonnet to free them out of their position before pulling the skirt outwards and off. He said people who don't know that just pull them straight out and then... yeah broken clips.

Osman: The two photos below should give you an idea of the skirt holes and their placement, the clips are on the ramp below in the first photo (there are two types at least):
Krown R3 sills before.jpg
Krown R3 sills after.jpg
These users thanked the author warpc0il for the post:
GreySilver Beast (Tue Dec 31, 2019 12:17 am)
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ

Post Reply

Return to “DIY”