TRACKDAY : Tyres (for 18" wheels)

Equipment that may be needed plus general information on track days.
Post Reply
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

TRACKDAY : Tyres (for 18" wheels)

Post by Dr. FrankenRex »

Hey All,

Asking for a bit of advice here... I've had a bit of a search and can't find any specific track day tyre discussion anywhere - please point me in the right direction if it exists and I'm being an idiot).

I've looked at the obvious choices in the 'not horrific' budget which are:

- Federal RS-R
- Nankang NS2-R
- Yoko AD08R
- DMAC - various

I can't seem to find a definitive experience of any of them in an RX8, but do note that a lot of the people I've spotted on the forum run Federals - is there a reason for this or is it just because they're the most cost effective?

Answers/ thoughts on a postcard please - and if anyone has any recommendations that I've not considered then please let me know!

Dan
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
V8 Power
Former Member
Former Member
Posts: 10000
Joined: Wed Apr 09, 2014 8:48 pm
Location: Fantasy land
Has thanked: 253 times
Been thanked: 537 times

Re: Track Day Tyres (for 18" wheels)

Post by V8 Power »

Federal RS-R here
Very good in dry and once warmed up. I would say about 95% of the performance of Toyo R888.
Progessive control and where quite well. OK for road use.
Not brilliant in the wet but still as good as a cheaper normal road tyre.
“Extraordinary claims require extraordinary evidence " Carl Sagan.
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

Thanks V8, very useful.

I'll be keeping the R3 alloys for day-to-day road use and to and from the track, so I'm not fussed about what they're like on the road really.

This is potentially a very daft question - but what is the difference like on track between the RS-Rs and decent road tyres?
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
Eddie_r32
Former Member
Former Member
Posts: 1216
Joined: Fri Feb 12, 2016 6:18 pm
RX-8: 231
Location: Henley-on-Thames
Has thanked: 37 times
Been thanked: 136 times

Re: Track Day Tyres (for 18" wheels)

Post by Eddie_r32 »

I have 595rsr's and think they are great, I used to always use ad08r's but buffet was not there for them. They are great, they are more than good enough for my ability and the car. I am running 245/35/18 and 255/35/18.
2007 Galaxy grey 231.
RRP Parts: Full bridge, long tube header, cofs + tanks, pulleys, engine mounts, oil injectors, remap, race cat.
Other: Greddy sump, Autoexe exhaust, autoexe brake brace, ingalls engine brace, ultra racing f+r strut brace, hsd coilovers, whiteline Arbs, 4 pot brakes, r3 Diff, r3 interior and lots more
User avatar
mrspiller
Club Member
Club Member
Posts: 4245
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 280 times
Been thanked: 763 times

Re: Track Day Tyres (for 18" wheels)

Post by mrspiller »

Eddie_r32 wrote:I have 595rsr's and think they are great, I used to always use ad08r's but buffet was not there for them. They are great, they are more than good enough for my ability and the car. I am running 245/35/18 and 255/35/18.
Sorry to butt in here - Eddie , how do you find the 255 on standard rims ? I've just bought 4 888,s but look huge compared to the 245
Thanks
Wayne


Sent from my iPhone using Tapatalk
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

Can't speak for track tyres, but I'm running 255s on 8J rims and they fit, but they do extend beyond the edge of the wheel.
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
StreetDragster
Former Member
Former Member
Posts: 762
Joined: Mon Sep 16, 2013 1:23 pm
RX-8: 231
Colour: Velocity Red
Location: Blackpool
Has thanked: 12 times
Been thanked: 64 times

Re: Track Day Tyres (for 18" wheels)

Post by StreetDragster »

I have used the ns2rs and I now run yokohama neovas.

Both very good tyres, loved the ns2rs but I wanted the stock profile so went to the neovas which are also very good

Matt
2004 Mazda RX8 231 Trackcar
2004 Alfa Romeo GT 3.2V6
2018 Yamaha Tracer 900 GT
User avatar
V8 Power
Former Member
Former Member
Posts: 10000
Joined: Wed Apr 09, 2014 8:48 pm
Location: Fantasy land
Has thanked: 253 times
Been thanked: 537 times

Re: Track Day Tyres (for 18" wheels)

Post by V8 Power »

Dan.NJ72 wrote:Thanks V8, very useful.

I'll be keeping the R3 alloys for day-to-day road use and to and from the track, so I'm not fussed about what they're like on the road really.

This is potentially a very daft question - but what is the difference like on track between the RS-Rs and decent road tyres?
World of difference.
I would say 25% more grip and the ability to do 2 or 3 times the amount of hot laps until you need to cool them down.
“Extraordinary claims require extraordinary evidence " Carl Sagan.
User avatar
Eddie_r32
Former Member
Former Member
Posts: 1216
Joined: Fri Feb 12, 2016 6:18 pm
RX-8: 231
Location: Henley-on-Thames
Has thanked: 37 times
Been thanked: 136 times

Re: Track Day Tyres (for 18

Post by Eddie_r32 »

mrspiller wrote:
Eddie_r32 wrote:I have 595rsr's and think they are great, I used to always use ad08r's but buffet was not there for them. They are great, they are more than good enough for my ability and the car. I am running 245/35/18 and 255/35/18.
Sorry to butt in here - Eddie , how do you find the 255 on standard rims ? I've just bought 4 888,s but look huge compared to the 245
Thanks
Wayne


Sent from my iPhone using Tapatalk
I'm running volks on my car so 9 and 10j wheels
2007 Galaxy grey 231.
RRP Parts: Full bridge, long tube header, cofs + tanks, pulleys, engine mounts, oil injectors, remap, race cat.
Other: Greddy sump, Autoexe exhaust, autoexe brake brace, ingalls engine brace, ultra racing f+r strut brace, hsd coilovers, whiteline Arbs, 4 pot brakes, r3 Diff, r3 interior and lots more
User avatar
mrspiller
Club Member
Club Member
Posts: 4245
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 280 times
Been thanked: 763 times

Re: Track Day Tyres (for 18" wheels)

Post by mrspiller »

Eddie_r32 wrote:
mrspiller wrote:
Eddie_r32 wrote:I have 595rsr's and think they are great, I used to always use ad08r's but buffet was not there for them. They are great, they are more than good enough for my ability and the car. I am running 245/35/18 and 255/35/18.
Sorry to butt in here - Eddie , how do you find the 255 on standard rims ? I've just bought 4 888,s but look huge compared to the 245
Thanks
Wayne


Sent from my iPhone using Tapatalk
I'm running volks on my car so 9 and 10j wheels
Please enlighten me which ones your using ?? I need a spare set and you could well make my day
Cheers - Wayne


Sent from my iPhone using Tapatalk
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

It says Volk Racing Challenges in his sig :thumleft:
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
Eddie_r32
Former Member
Former Member
Posts: 1216
Joined: Fri Feb 12, 2016 6:18 pm
RX-8: 231
Location: Henley-on-Thames
Has thanked: 37 times
Been thanked: 136 times

Re: Track Day Tyres (for 18" wheels)

Post by Eddie_r32 »

Dan.NJ72 wrote:It says Volk Racing Challenges in his sig :thumleft:
Yup the most underrated wheel ever!
2007 Galaxy grey 231.
RRP Parts: Full bridge, long tube header, cofs + tanks, pulleys, engine mounts, oil injectors, remap, race cat.
Other: Greddy sump, Autoexe exhaust, autoexe brake brace, ingalls engine brace, ultra racing f+r strut brace, hsd coilovers, whiteline Arbs, 4 pot brakes, r3 Diff, r3 interior and lots more
User avatar
SeriousSam
Former Member
Former Member
Posts: 3020
Joined: Sun May 06, 2012 3:32 pm
RX-8: 231
Colour: Velocity Red
Location: Blazingstoke
Has thanked: 43 times
Been thanked: 245 times

Re: Track Day Tyres (for 18" wheels)

Post by SeriousSam »

To add to the above, is there anyone running 255s on standard 18" rims? I believe they will fit the rim, although I can't be bothered to dig up the spreadsheet that proves it, but how does the wheel and tyre combo fit inside the rear arches? I've got a set of tyres currently for sale that I may keep if the standard wheels will allow them to fit without scrubbing, and I only need to know about the rears. I may have to just give it a shot, because I'm also lowered on Eibach springs, so if I get back from the AGM with enough shredded tyres I may just give it a shot.

Back on topic, I was considering a set of Nankang's new AR-1 tyres, until I found out that my local tyre shop can't get them yet. Once I've burnt through my current 'track' tyres (part worn road tyres with melted bits all over them) then I'm looking at some Nankang track rubber, mostly because it's well reviewed and I can get it cheaply from my local reliable tyre centre.
To Do List: HKS CAMP2 install; cruise control; new exhaust; detail paintwork, possible respray

Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

With regards to the 255 questions Sam, I'm running 255/35R19s on the standard R3 rims. I *believe* that this is the same physical size as the 18s running 255/40R18s.

Bashed them in a calculator to confirm this:
Untitled.png
Untitled.png (14.63 KiB) Viewed 3678 times
Happy for you to have a gander as I'm at Rockingham on Saturday.
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
SeriousSam
Former Member
Former Member
Posts: 3020
Joined: Sun May 06, 2012 3:32 pm
RX-8: 231
Colour: Velocity Red
Location: Blazingstoke
Has thanked: 43 times
Been thanked: 245 times

Re: Track Day Tyres (for 18" wheels)

Post by SeriousSam »

I might well do, and that calculator shows quite an interesting result. I wish I knew what the full wheel specs for the R3 rims is - I could really use knowing the width and offset of the rims themselves. I've got a set of Ultralite 18" wheels that will look the business once they're refurbed, but they sit flush to the arches. Looks the business on standard tyres, but load the car up on the 255s and you get some nasty grating noises, pretty much all of the time. I did a 4-mile journey like that and decided I'd probably best try a different tyre size with those rims!
To Do List: HKS CAMP2 install; cruise control; new exhaust; detail paintwork, possible respray

Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

Hmm... Yeah, probably not best!

AFAIK the R3 rims are 19x8J ET50, but would need to check the actual wheel to confirm this. As I said, I'm about on Saturday, so come poke me and have a look. I've been running 255s for quite some time with no issues, track days, country lane blasts, motorways and all points in between with no rubbing or anything.

With regards to the actual topic, I'm still undecided between the RS-Rs and the NS2-Rs... I can't afford the AZ-1s sadly.
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
SeriousSam
Former Member
Former Member
Posts: 3020
Joined: Sun May 06, 2012 3:32 pm
RX-8: 231
Colour: Velocity Red
Location: Blazingstoke
Has thanked: 43 times
Been thanked: 245 times

Re: Track Day Tyres (for 18" wheels)

Post by SeriousSam »

I'll definitely come and have a nose on the day, I'll have my standard rims with me so it should be easy enough to see where the two sit relative to each other. Could even go for a test fit, I'll be bringing my impact wrench so swapping wheels is a breeze.
To Do List: HKS CAMP2 install; cruise control; new exhaust; detail paintwork, possible respray

Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
User avatar
Dr. FrankenRex
Committee Member
Committee Member
Posts: 8169
Joined: Thu Jan 08, 2015 1:30 pm
RX-8: R3
Colour: Velocity Red
Location: Cotswolds
Has thanked: 531 times
Been thanked: 1558 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by Dr. FrankenRex »

Fine by me :thumleft:
DOC 787B

Club Information Coordinator - Media Team Lead


LM30 VelociBRAPTOR - Josh Scott magic sauce porting, shiny big brakes and a big ole spoiler

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
User avatar
warpc0il
Spin Doctor
Spin Doctor
Posts: 32531
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 826 times
Been thanked: 3537 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by warpc0il »

255 shouldn't be a clearance issue on the standard S1 rims, unless you're also running 20mm spacers.

Will They Fit?
Dave
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ
User avatar
warpc0il
Spin Doctor
Spin Doctor
Posts: 32531
Joined: Sat Sep 06, 2008 10:56 pm
RX-8: 231
Colour: Lightning Yellow
Location: Groomsport, Co Down, NI
Has thanked: 826 times
Been thanked: 3537 times
Contact:

Re: Track Day Tyres (for 18" wheels)

Post by warpc0il »

Going back to the OP question, I'd be talking to Nick the Mazda On Tracks tyre guy, as they have so much experience with track tyres on the 8.

They provide track-side support at many locations and can match tyres to your budget, driving style/capability and the setup of the car.
Dave
The Spin Doctor ™
uǝǝɹɔs ɹnoʎ ʇɹǝʌuı ǝsɐǝld :ɹoɹɹǝ
User avatar
SeriousSam
Former Member
Former Member
Posts: 3020
Joined: Sun May 06, 2012 3:32 pm
RX-8: 231
Colour: Velocity Red
Location: Blazingstoke
Has thanked: 43 times
Been thanked: 245 times

Re: Track Day Tyres (for 18" wheels)

Post by SeriousSam »

Won't Nick also be at the AGM? MoT are certainly running the sprint event jobbie, and Nick tends to take the tyre truck to quite a few track days.
To Do List: HKS CAMP2 install; cruise control; new exhaust; detail paintwork, possible respray

Done: Hayward Rotary rebuild and stage 2 port; Racing Beat ARBs, adjustable front droplinks, ram air intake and lightened flywheel; Exedy stage 1 clutch; Eibach Pro-Kit lowering springs; Koyo radiator; heated front screen; EBC redstuff pads all round
User avatar
mrspiller
Club Member
Club Member
Posts: 4245
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 280 times
Been thanked: 763 times

Re: Track Day Tyres (for 18" wheels)

Post by mrspiller »

Eddie_r32 wrote:
Dan.NJ72 wrote:It says Volk Racing Challenges in his sig :thumleft:
Yup the most underrated wheel ever!
My bad - I never seen that , only volk ...


Sent from my iPhone using Tapatalk
User avatar
Ainmhidh
Club Member
Club Member
Posts: 3643
Joined: Wed Dec 21, 2016 4:58 pm
RX-8: R3
Colour: Velocity Red
Location: Milton Keynes, UK
Has thanked: 531 times
Been thanked: 454 times

Re: Track Day Tyres (for 18" wheels)

Post by Ainmhidh »

Dan.NJ72 wrote:Hmm... Yeah, probably not best!

AFAIK the R3 rims are 19x8J ET50, but would need to check the actual wheel to confirm this. As I said, I'm about on Saturday, so come poke me and have a look. I've been running 255s for quite some time with no issues, track days, country lane blasts, motorways and all points in between with no rubbing or anything.

With regards to the actual topic, I'm still undecided between the RS-Rs and the NS2-Rs... I can't afford the AZ-1s sadly.
Having just replaced the front rubber and had the wheels off again at the weekend to do the brakes I can tell you the 19" R3 rims are stamped ET47 so pretty close. :)
The manual and tech specs say they are 8J although the guy at the fitting station measured them with his big plastic calipers and proclaimed them to be 8.5 - Not entirely confidence inspiring :roll: but at least I'd supplied both the rims and the rubber so I know they're okay, and they asked what pressure I wanted them doing rahter than the usual garage guesswork!
Alan (he/him)| 2010 R3 | stock apart from a couple of dings and scrapes! (Black diamond discs, yellow stuff pads, RRP MkII Coils, MSD leads...)
User avatar
mrspiller
Club Member
Club Member
Posts: 4245
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 280 times
Been thanked: 763 times

Re: Track Day Tyres (for 18" wheels)

Post by mrspiller »

Eddie_r32 wrote:
Dan.NJ72 wrote:It says Volk Racing Challenges in his sig :thumleft:
Yup the most underrated wheel ever!
I've had a good look at the volk wheels today but can't seem to find a uk outlet- where did you get yours ?
I lust admit I initially thought you meant VAG wheels ImageImage


Sent from my iPhone using Tapatalk
User avatar
ChrisHolmes
Club Member
Club Member
Posts: 28281
Joined: Sun Jan 29, 2006 10:04 pm
Location: Cheltenham
Has thanked: 9694 times
Been thanked: 4899 times

Re: Track Day Tyres (for 18" wheels)

Post by ChrisHolmes »

I run 245/35x18 with 20mm spacers and Meister coil overs with no rubbing.
Rotary History;

Sep 2005-Aug 2006 EO55 XOL VR 231 New
Oct 2014-Mar 2019 OE06 EWJ VR 231
Jan 2019-Jun 2020 T200 CAD Orange SC 231
Feb 2020-May 2023 RR54 AJR VR 231 Modified for Track
Oct 2020-Mar 2021 YA56 EUE Copper Red Nemesis
Jun 2022-Apr 2023 TN07 JHD KURO Resurrected
Jun 2023-Jan2024 OV09 BFF Sparkling Black R3
Avatar courtesy of my grandson Cameron
Post Reply

Return to “Trackday Information & FAQ's”