Kuro project
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Kuro project
Kuro project!
She needs some love. Been sat since 2015
55k miles (ish) can’t remember exact number
TN07 JHD
Starts and drives (well, did drive ..tonight it popped the slave. And my patience with it!!) so she needs a new home as I’m never going to find the time to sort this! I’ve got a slave to go with it. I’ll fit it if I get chance….
Starts really well hot and cold
Bodywork is ok, few marks but ok! bootlid very rusty!
The sills arent too bad, have some surface rust but no big rusty holes.
Subframes are the same, have pics under it If you want to see
It’s had a full set of calipers and pads fitted and pair of front struts and springs and a set of oil cooler lines
Seems too good to chop up. Headlights look brand new and are the chrome kuro ones.
£800 Ono - I wouldn’t recommend driving this !
She needs some love. Been sat since 2015
55k miles (ish) can’t remember exact number
TN07 JHD
Starts and drives (well, did drive ..tonight it popped the slave. And my patience with it!!) so she needs a new home as I’m never going to find the time to sort this! I’ve got a slave to go with it. I’ll fit it if I get chance….
Starts really well hot and cold
Bodywork is ok, few marks but ok! bootlid very rusty!
The sills arent too bad, have some surface rust but no big rusty holes.
Subframes are the same, have pics under it If you want to see
It’s had a full set of calipers and pads fitted and pair of front struts and springs and a set of oil cooler lines
Seems too good to chop up. Headlights look brand new and are the chrome kuro ones.
£800 Ono - I wouldn’t recommend driving this !
Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Re: Kuro project
Well, no clutch and not been on the road since 2015,
Number plate is here- if you want to drive it then that’s fine with me
Number plate is here- if you want to drive it then that’s fine with me
Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk
- Dr. FrankenRex
- Committee Member
- Posts: 6664
- Joined: Thu Jan 08, 2015 1:30 pm
- RX-8: R3
- Colour: Velocity Red
- Location: Cotswolds
- Has thanked: 423 times
- Been thanked: 1163 times
- Contact:
Re: Kuro project
I really don't need this... But that looks great, especially for the money
Doc - Club Information Coordinator - Media Team
FrankenRex2 - RR Full Bridge with Race Extension porting, shiny big brakes and lots more besides
Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
FrankenRex2 - RR Full Bridge with Race Extension porting, shiny big brakes and lots more besides

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
- Calcifur83
- Club Member
- Posts: 822
- Joined: Sat Jun 01, 2013 1:42 pm
- RX-8: Nemesis
- Colour: Copper Red
- Location: Montrose, Scotland
- Has thanked: 50 times
- Been thanked: 70 times
Re: Kuro project
pretty much the same thoughts I had. Always wanted a Kuro, but I still have my Nemesis to fix up!Dr. FrankenRex wrote: ↑Thu Jun 23, 2022 9:46 amI really don't need this... But that looks great, especially for the money
2007 Copper Red Nemesis - Project £500 Nemesis
.....Loading.....
2006 Titanium Grey 192 - Now a Donor
Petit Racing Modular Exhaust
Tein S Lower Springs
K&N Hi-Flow Air Filter
.....Loading.....
2006 Titanium Grey 192 - Now a Donor

Petit Racing Modular Exhaust
Tein S Lower Springs
K&N Hi-Flow Air Filter
- warpc0il
- Spin Doctor
- Posts: 30458
- Joined: Sat Sep 06, 2008 10:56 pm
- RX-8: 231
- Colour: Lightning Yellow
- Location: Groomsport, Co Down, NI
- Has thanked: 728 times
- Been thanked: 3096 times
- Contact:
- Calcifur83
- Club Member
- Posts: 822
- Joined: Sat Jun 01, 2013 1:42 pm
- RX-8: Nemesis
- Colour: Copper Red
- Location: Montrose, Scotland
- Has thanked: 50 times
- Been thanked: 70 times
Re: Kuro project
But it's such a lovely black. I am actually considering whether I should get my Nemesis repainted in the Copper red it is meant to be, or the Kuro black, cuz it's so nice!
2007 Copper Red Nemesis - Project £500 Nemesis
.....Loading.....
2006 Titanium Grey 192 - Now a Donor
Petit Racing Modular Exhaust
Tein S Lower Springs
K&N Hi-Flow Air Filter
.....Loading.....
2006 Titanium Grey 192 - Now a Donor

Petit Racing Modular Exhaust
Tein S Lower Springs
K&N Hi-Flow Air Filter
- qwakers
- Forum Moderator
- Posts: 6225
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: 231
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 345 times
- Been thanked: 1372 times
- Contact:
Re: Kuro project
Another case of i dont need it but i would buy it... if it wouldn't be another 800 in diesel to collect it...
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Re: Kuro project
I paid delivery on it from Scotland (trying to forget that!) lol
Was a great idea at the time! Lol
Any bids before I deal with all the messers on eBay?
Was a great idea at the time! Lol
Any bids before I deal with all the messers on eBay?
Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk
- qwakers
- Forum Moderator
- Posts: 6225
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: 231
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 345 times
- Been thanked: 1372 times
- Contact:
- ChrisHolmes
- Events Team Member
- Posts: 24367
- Joined: Sun Jan 29, 2006 10:04 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Cheltenham
- Has thanked: 7702 times
- Been thanked: 4003 times
Re: Kuro project
I don't need it either but will match James offer of £1000 delivered to Cheltenham, can we flip for it?
- These users thanked the author ChrisHolmes for the post:
- nightfire10 (Thu Jun 23, 2022 5:22 pm)
AB Bucket seats & 5 point harnesses
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
- qwakers
- Forum Moderator
- Posts: 6225
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: 231
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 345 times
- Been thanked: 1372 times
- Contact:
- ChrisHolmes
- Events Team Member
- Posts: 24367
- Joined: Sun Jan 29, 2006 10:04 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Cheltenham
- Has thanked: 7702 times
- Been thanked: 4003 times
Re: Kuro project
Cheeky really my sniping after your bid was in so I will butt out and settle for 1st dibs if you dont have it James which is more polite.
AB Bucket seats & 5 point harnesses
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Re: Kuro project
Yeah Cornwall is a lot further than Cheltenham! Lol
Chris. I am happy to take that offer,
James - I make you about £300 further for the recovery man?
Chris. I am happy to take that offer,
James - I make you about £300 further for the recovery man?
Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk
- qwakers
- Forum Moderator
- Posts: 6225
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: 231
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 345 times
- Been thanked: 1372 times
- Contact:
- ChrisHolmes
- Events Team Member
- Posts: 24367
- Joined: Sun Jan 29, 2006 10:04 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Cheltenham
- Has thanked: 7702 times
- Been thanked: 4003 times
Re: Kuro project
Does that mean I have bought a Kuro?
- These users thanked the author ChrisHolmes for the post:
- Proactive (Thu Jun 23, 2022 9:13 pm)
AB Bucket seats & 5 point harnesses
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
- qwakers
- Forum Moderator
- Posts: 6225
- Joined: Fri Aug 04, 2017 4:56 pm
- RX-8: 231
- Colour: Nordic Green
- Location: cornwall
- Has thanked: 345 times
- Been thanked: 1372 times
- Contact:
Re: Kuro project
unless pete feels like being very generous and effectively taking a £300 haircut on the asking price, i suspect you have yes!
- ChrisHolmes
- Events Team Member
- Posts: 24367
- Joined: Sun Jan 29, 2006 10:04 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Cheltenham
- Has thanked: 7702 times
- Been thanked: 4003 times
Re: Kuro project
A couple of things to clarify. Once the clutch slave is fitted could you arrange the delivery to Cheltenham as you may have better contacts for haulage than me.
Having only just got RR54 going ok I must be mad but what the hell are you supposed to do when retired?
Middle of July would ok for a delivery slot but I am not in any rush for the car.
How and when do you want payment?
Having only just got RR54 going ok I must be mad but what the hell are you supposed to do when retired?
Middle of July would ok for a delivery slot but I am not in any rush for the car.
How and when do you want payment?
AB Bucket seats & 5 point harnesses
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Re: Kuro project
Yeah sorry with the cost of everything these days, recovery truck and diesel I’m afraid Chris’ is the better option for me
Thank you both for your offers, Chris I’ll pm you, cheers
Thank you both for your offers, Chris I’ll pm you, cheers
Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk
- MightyCondor
- Club Member
- Posts: 1387
- Joined: Sat Jul 27, 2013 3:14 pm
- RX-8: PZ
- Colour: Brilliant Black
- Location: Reading, Berks
- Has thanked: 325 times
- Been thanked: 579 times
Re: Kuro project
How many RX-8s will you have owned now Chris? Just want to know in case you're ahead of me 

The new 2022 Rotary Fleet - RX-8 PZ - Purple Helmet Warrior
Previous Threads:
2004 Sunlight Silver 231 Impulsive Panic Buy Rotary Shed - Sold & lesser seen RX-7 FD3s - R.I.P.
2005 Winning Blue 231
Previous Threads:
2004 Sunlight Silver 231 Impulsive Panic Buy Rotary Shed - Sold & lesser seen RX-7 FD3s - R.I.P.
2005 Winning Blue 231
- ChrisHolmes
- Events Team Member
- Posts: 24367
- Joined: Sun Jan 29, 2006 10:04 pm
- RX-8: 231
- Colour: Velocity Red
- Location: Cheltenham
- Has thanked: 7702 times
- Been thanked: 4003 times
Re: Kuro project
That would be 6 Alan
EO55 XOL VR 231
OE06 EWJ VR 231
T200 CAD Orange SC 231
YA56 EUE Nemesis CR 192
RR54 AJR SC 231
????? ??? Kuro 231
EO55 XOL VR 231
OE06 EWJ VR 231
T200 CAD Orange SC 231
YA56 EUE Nemesis CR 192
RR54 AJR SC 231
????? ??? Kuro 231
- These users thanked the author ChrisHolmes for the post (total 3):
- MightyCondor (Thu Jun 23, 2022 11:32 pm) • GreySilver Beast (Thu Jun 23, 2022 11:52 pm) • LeeW (Fri Jun 24, 2022 6:29 am)
AB Bucket seats & 5 point harnesses
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
Rebuilt 6 port
Pettit SC
Racing Beat alloy flywheel, oil lines & ARBs , REV 8 Full SS Exh
Stg1 Exedy Clutch
AEM Smart Coils & MSD leads
Remote oil filter
Tein MonoSports & EDFC
Fully polybushed
Racing Brake 4 Pot Calipers
LED Rear Lights
MazdaSpeed skirts & Rear Spoiler
Safety Devices Full cage
Lockwood SS Grills
Mishimoto Catch Tank
- Dr. FrankenRex
- Committee Member
- Posts: 6664
- Joined: Thu Jan 08, 2015 1:30 pm
- RX-8: R3
- Colour: Velocity Red
- Location: Cotswolds
- Has thanked: 423 times
- Been thanked: 1163 times
- Contact:
Re: Kuro project
*laughs in double digits*
Look at you guys with your rookie numbers
Look at you guys with your rookie numbers
- These users thanked the author Dr. FrankenRex for the post:
- Proactive (Fri Jun 24, 2022 7:37 am)
Doc - Club Information Coordinator - Media Team
FrankenRex2 - RR Full Bridge with Race Extension porting, shiny big brakes and lots more besides
Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
FrankenRex2 - RR Full Bridge with Race Extension porting, shiny big brakes and lots more besides

Doc's Auto Barn - https://www.youtube.com/channel/UC7BW_h ... Ym6eGqEIWg
-
- Club Member
- Posts: 2489
- Joined: Mon May 15, 2017 9:09 pm
- RX-8: 231
- Colour: Strato Blue
- Location: Northants
- Has thanked: 42 times
- Been thanked: 423 times
Re: Kuro project
Blimey
I'm still on my 1st one....
that said its had quite bit replaced, welded up , resprayed, rebuilt etc etc
and you boys don't hang around do you? I was recommending this car to young lad at work , but sounds like he's missed the boat
good luck with it Chris, having got 1 running obviously you need a spare
makes perfect sense to me
I'm still on my 1st one....
that said its had quite bit replaced, welded up , resprayed, rebuilt etc etc
and you boys don't hang around do you? I was recommending this car to young lad at work , but sounds like he's missed the boat
good luck with it Chris, having got 1 running obviously you need a spare

makes perfect sense to me
-
- Club Member
- Posts: 1030
- Joined: Tue Apr 29, 2008 5:44 pm
- RX-8: PZ
- Colour: Galaxy Grey
- Location: Melton Mowbray with compression tester :)
- Has thanked: 0
- Been thanked: 22 times
Re: Kuro project
I’ve got a few projects coming up for sale as realisation that I’ve no spare time at all with small family and busy at work! So watch this space! 

Nutty Chappie's emporium is now open!
For parts, compression testing and servicing
Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk

Based in Melton Mowbray, Leicestershire Pete - 07866-685127
www.nuttysrx8.co.uk