RX-8 Owners Club 2020 Annual Meet weekend
Saturday 29th February - Sunday 1st March

Club exclusive trackday at the Three Sisters Circuit | Evening Dinner | AGM




Castle Combe Circuit's Japanese Car Show
Saturday 6th June 2020

Club Displays | Drifting Demos | Tracktime | and more

Offset Superpro

Any form of normally aspirated power mods.
Post Reply
Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Offset Superpro

Post by Bacchus » Fri Jan 03, 2020 1:36 pm

Hi All, I have seen a post or two regarding the offset superpro kit, and also the whole oem vs poly saga. There was a hint towards one of you guys knowing the individual oem Bush part numbers rather than buying a whole arm, I have searched and failed to find any more on this, does anyone actually know the numbers?

My preference is OEM, but if I do end up going superpro offset, is there anyone who can actually set the car up properly with them, I am in Essex, just south of Colchester, but I wouldn't mind doing some miles for a proper geo.

Cheers all.

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Fri Jan 03, 2020 1:47 pm

I have the superpro , my standard ones were ruined when I cut / burned the rusted bolts out . Before superpro I had a cheaper poly set which weren’t up to the job , however I am on my second ( harder compound) set of superpro which were changed under guarantee . Knowing what I know now I would have just bought a nearly new used set of arms , there has been a recall so they are available , I know big Pete did have some . At the time I done mine the recall hadn’t started . And I’ve had to pay for 3 visits to have the car re aligned


Sent from my iPhone using Tapatalk

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Fri Jan 03, 2020 1:52 pm

Recall from mazda?

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Fri Jan 03, 2020 1:54 pm

Bacchus wrote:Recall from mazda?
Only 04 models I think
Yep from Mazda


Sent from my iPhone using Tapatalk

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Fri Jan 03, 2020 3:32 pm

Ahh mine is 2009

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Fri Jan 03, 2020 3:35 pm

I’m not sure if front arms are different .
I’m sure someone more experienced-in R3 components will be along shortly to advise


Sent from my iPhone using Tapatalk

User avatar
ChrisHolmes
Committee Member
Committee Member
Posts: 16440
Joined: Sun Jan 29, 2006 10:04 pm
RX-8: 231
Colour: Custom
Location: Cheltenham
Has thanked: 4231 times
Been thanked: 1708 times

Re: Offset Superpro

Post by ChrisHolmes » Fri Jan 03, 2020 3:52 pm

If they aren't worn then my advice would be don't mess with them.
Supercharged
Racing Beat Alloy flywheel
Exedy Stg 1 Clutch
White Line ARBs
Tein Monosport Coilovers
Speedline diamond cut alloy wheels
Racing Brake 4 pot calipers, slotted discs & alloy bells
Racing Beat Custom front bumper, grills & Side Skirts
Mazdaspeed Rear Spoiler (Customised)
Rear Diffuser
Vented Carbon Bonnet
SOHN Adaptor
Custom Leather interior & Boot trim
Adaptronic ECU

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Fri Jan 03, 2020 6:15 pm

That's the problem, they came up in the mot. Excessive deflection on front wheels. I am not generally one for blindly chucking new stuff at the car when there is no need. Seems I am on the bush train though, already needed drop links and arb bushes, now front wishbones...

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Fri Jan 03, 2020 8:37 pm

Bacchus wrote:That's the problem, they came up in the mot. Excessive deflection on front wheels. I am not generally one for blindly chucking new stuff at the car when there is no need. Seems I am on the bush train though, already needed drop links and arb bushes, now front wishbones...
Drop big Pete a message or Boston rotary ( same guy ) on FB and ask him are they different .



Sent from my iPhone using Tapatalk

User avatar
ChrisHolmes
Committee Member
Committee Member
Posts: 16440
Joined: Sun Jan 29, 2006 10:04 pm
RX-8: 231
Colour: Custom
Location: Cheltenham
Has thanked: 4231 times
Been thanked: 1708 times

Re: Offset Superpro

Post by ChrisHolmes » Fri Jan 03, 2020 10:04 pm

Bacchus wrote:
Fri Jan 03, 2020 6:15 pm
That's the problem, they came up in the mot. Excessive deflection on front wheels. I am not generally one for blindly chucking new stuff at the car when there is no need. Seems I am on the bush train though, already needed drop links and arb bushes, now front wishbones...
Ok, I thought you may be just thinking about “upgrading” to polybushes.
Supercharged
Racing Beat Alloy flywheel
Exedy Stg 1 Clutch
White Line ARBs
Tein Monosport Coilovers
Speedline diamond cut alloy wheels
Racing Brake 4 pot calipers, slotted discs & alloy bells
Racing Beat Custom front bumper, grills & Side Skirts
Mazdaspeed Rear Spoiler (Customised)
Rear Diffuser
Vented Carbon Bonnet
SOHN Adaptor
Custom Leather interior & Boot trim
Adaptronic ECU

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Sat Jan 04, 2020 2:08 pm

Hey Chris, for a car that will not see much track, upgrading to poly, is not really an upgrade I think.

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Mon Jan 06, 2020 12:40 pm

Hi All,

I have gone with all of your recommendations and spoken to Pete via FB, Mazda are being a PITA over this and are wanting a small fortune for these which while I think is maybe worth it, the front end set I need comes in at £496 inc. VAT, I then have to think labour costs for pressing out the lower arm bushes and then getting a geo sorted.

I am therefore leaning toward the Superpro bushes, they seem to be the best of the poly options, they also come in at £290 delivered, and I will only have to pay an additional amount of labour for the upper arm bushes.

Normally I would not go with a replace all, but my experience with the car thus far and having poked about with a pry bar etc leads me to believe that it would be better just doing the whole front end to save me having to dismantle it again and do another Geo etc in a few months time.

So my last question is that SUperpro do the caster eccentric bushes, I have seen it recommended that unless it is a track / race car that these are pointless, I assume therefore that the standard oem bushes are not adjustable in this respect?

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Mon Jan 06, 2020 12:48 pm

Bacchus wrote:Hi All,

I have gone with all of your recommendations and spoken to Pete via FB, Mazda are being a PITA over this and are wanting a small fortune for these which while I think is maybe worth it, the front end set I need comes in at £496 inc. VAT, I then have to think labour costs for pressing out the lower arm bushes and then getting a geo sorted.

I am therefore leaning toward the Superpro bushes, they seem to be the best of the poly options, they also come in at £290 delivered, and I will only have to pay an additional amount of labour for the upper arm bushes.

Normally I would not go with a replace all, but my experience with the car thus far and having poked about with a pry bar etc leads me to believe that it would be better just doing the whole front end to save me having to dismantle it again and do another Geo etc in a few months time.

So my last question is that SUperpro do the caster eccentric bushes, I have seen it recommended that unless it is a track / race car that these are pointless, I assume therefore that the standard oem bushes are not adjustable in this respect?
The standard bush is more than adequate , adjustment is done via the bolt .
Speak to nick Beal superpro Europe , he’s a very helpful guy .


Sent from my iPhone using Tapatalk

User avatar
Phil Bate
Spin Doctor
Spin Doctor
Posts: 9214
Joined: Thu Mar 22, 2012 12:49 am
RX-8: 231
Colour: Sunlight Silver
Location: South Wales
Has thanked: 33 times
Been thanked: 163 times

Re: Offset Superpro

Post by Phil Bate » Mon Jan 06, 2020 1:49 pm

Have you thought about new pattern parts? A set of lower arms from rockauto.com will currently set you back 243 quid delivered inc. VAT from 'murica


Scratch that, just realised you have an R3 :oops:
Phil's subtle sunlight silver - stronger, faster, with added red bits and stuff engine donor!
Operation Mint - Kuro preservation project
The pimped out Glacier White XE - quintessential British motoring from Jaguar

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Mon Jan 06, 2020 3:31 pm

Ahh yes Phil, wish I hadn't now tbh, could have quite happily got the PZ. Seems now I have to pay double to get anything, and have absolutely no choice about where to get it.

Bacchus
Club Member
Club Member
Posts: 17
Joined: Thu Jul 04, 2019 8:59 am
RX-8: R3
Colour: Sparkling Black
Has thanked: 0
Been thanked: 1 time

Re: Offset Superpro

Post by Bacchus » Mon Jan 06, 2020 4:35 pm

Is there a company that we get discount on Superpro stuff, I have been looking through the discount section and cannot find anywhere.
These users thanked the author Bacchus for the post:
mrspiller (Mon Jan 06, 2020 4:37 pm)

User avatar
mrspiller
Club Member
Club Member
Posts: 2275
Joined: Wed Dec 02, 2015 7:04 pm
RX-8: 231
Colour: Copper Red
Location: Hengoed - South Wales
Has thanked: 104 times
Been thanked: 250 times

Re: Offset Superpro

Post by mrspiller » Mon Jan 06, 2020 4:58 pm

Bacchus wrote:Is there a company that we get discount on Superpro stuff, I have been looking through the discount section and cannot find anywhere.
Have you chat with Nick , he’s always been very helpful with me


Sent from my iPhone using Tapatalk

Post Reply

Return to “Naturally Aspirated”