This forum is just a part of the RX-8 Owners Club; to get the best out of the Club you should really look at joining up!
Here are some of the benefits of being a Club member:
See and post in all parts of the forum
As a guest, you can only see a...
Little while ago car coolant was leaking out of the radiator from a cracked in the top, a new one was fitted. Less than 2 months later and 300 ish miles, driving and noticed my wife returning from short journey that the fan was staying on when switched off. I let it cool. Checked the coolant and...
Not sure the best place to stick this (and it's a long shot), but I wonder if anyone has any CAD models of the 8? I'm thinking about the dash in particular, but anything would be a start.
First technical post so please be kind and i hope it is in the correct area.
I have suffered with the 3rd gear pop out since i got the car some 4 years ago and i thought it had to be a syncro/engagement issue but in browsing another thread about gearbox oil someone mentioned it can be...
So I decided to start a new thread just to keep things separate. I've been speaking to a member here - Ray. Who has been trying to sell his R3 but with no luck.. The battery is in the boot and it has had an aircon delete . He said that the battery is easily reversible but wasn't sure what was...
so i got the 8 running well (omp replaced from rx specialist in coventry , nice guy )
the wheels were crap so were the front tyres (autoguard) so i put my spare winter set on there 17 with winter tyres wow what a diff , noise ride and roadholding . Has anyone else gone down to 17 ...if so any pics
I've been visiting the Castle Climbing Centre in North London recently, and I've see a rather nice looking silver '54 plate (iirc) with some sort of body kit - perhaps the Mazdaspeed bodykit. Is that anyone's here?
Hello!
I have an idea, and I need to call on people with far more experience than me!
Before I go on, I have done my research, and I have been through the faq's. I just need some real life experiences
So basically I'm planning to use an rx8 as a donor to engine swap into my mk indy kit car....
Just got a mazdaspeed spoiler that I was going to butcher and make a one-off spoiler, but I've strong feelings that it could be a genuine spoiler judging by the fitment of it. Anyway to check for a Mazda number or anything? If it's genuine then I'm reluctant to butcher but I also already have a...
Changing the rear pads on my R3 and thought I'd look at the discs too. There's a really good guide by diddyman that I will follow for the process. But first I thought I'd check the discs too....
They are currently 17.7mm thickness.
EuroCarParts replacements discs by Mintex and Pagid both have a...
Well I had my RX-8 on the road in October for the 1st time and loved it, was a great fun to drive. I did have the irritation however of the windscreen contently misting up and since I've taken all my interior out I couldn't use the fans, aarrggghhh. I looked at a photo of the stereo I...
Well, I'm only few days into RX8 ownership, and being part of this fantastic forum but alas, it's game over for me.
My RX8 is just stunning to drive, there doesn't seem to be any power loss, but today I've discovered it 100% has a hot starting issue... :? :x :oops: :evil:
I'm currently in the process of buying an R3 - hopefully. Car looks like it has been extremely well looked after + low miles. Qwakers has kindly agreed to go and have a look at it for me at some point.
The seller kindly sent me the compression test today (below). I didn't recognise the company...
I knew what I was getting into with the RX8 and have aimed to be fastidious in trying to avoid flooding. However, following on from my post about the cars odd handling when lifting off the power, I checked the tyre pressures this morning and found them to be :-
Hi all, I was idly checking the MOT history on my R3 which arrived today and noticed a recall outstanding, I also checked the R3 I have just sold and also shows one so just wondering if anyone has further info?
Noticed a fairly loud vibration coming from the passenger side speaker in the door card. Only happens when the bass is a bit louder but I took it off yesterday to see if it was anything loose and couldn't find anything when disconnected. Any ideas or should I just try and find a...
2nd day driving the 8 today and decided I should go to a local specialist Silver Fern performance as they are only 15 minutes away from me. I wanted to get a compression test and haven't been able to since the car has been SORN for a while. After running some cataclean through and now...
yesterday a couple of people had missing exhaust bolts or other issues, and i mentioned to a few that i got my bolts etc from autodoc, a significant saving over mazda..
Good Morning, i was wondering whether people on here could post up on this thread,a typical abbreviation used in relation to our cars,with it's full meaning.
I ,for example, am sometimes stuck when it comes to a post that is full of them,and find that i am scratching my head sometimes,whilst also...
Hi all sorry to be a pain could someone please tell me where the above is located exactly please
A pic would be good(through drivers side or passenger side?)
Many thanks
Dazza
as far I know there is no good source about this subject.
for s1 best is to use original design and replace it with airbag switch, and transfer airbag switch somewhere less like glove box or so.
it has two wires only !
I have four Vresestein 225/45 ZR 18 95Y on my RX8 230. (Had car since new on 2004!)
It has failed its MOT as the front offside tyre has two cuts.
I don't want to have to replace all the tyres, or even 2.
I can't find the Vresestein 225/45 ZR 18 95Y anywhere.
The nearest I can find is:
225/45R18...
I have bought the air-dam pictured below together with some brake ducting.
Can anyone recommend, someone in the Rotary community, who would be able to fit this for me and install the brake ducting by cutting two holes in the dam lead to the brake discs.
hello,this question is aimed mainly at anyone who is running poly bushes on their lower arms. i have recently acquired a front subframe complete with a good set of lower arms,apart fromthe big rear bush which fits in the pocket in the subframe. i already have a car set of poly bushes,so my question...
Looking for some guidance regarding an aftermarket decat exhaust and which gaskets to use to stop it blowing.
I bought the car 6 months ago (2004 -192) with a decat fitted (Jap parts ZZ02743), it`s similar to Ebay item # 351660805050, which was slightly blowing at the time but now is getting...
The air conditioning on my '57 plate RX-8 is okay . On particularly hot days it remains on a relatively high fan speed, and it takes longer to get the temperature comfortable than I would expect of a good air conditioning system. It also doesn't dehumidify the car screen as quickly as I'd expect in...
I read in a couple of places that post-2006 RX8s are more reliable than pre-2006 models.
Is that correct? What are the changes? I'm not referring to the gen2 Renesis engine.
Whats the general consensus on the airbox tray? Is there a reason to leave it in if you have an AEM CAI? Does it help provide protection from underneath? Does it help guide cool air to the right places or is it better off to help air get other places?
bought a rx8 today from leeds sold as seen drove 8 miles stoped for petrol would not start phoned green flag they used a battery booster started straight up great drove about 6 miles slowed down for roundabout cut out would not restart . oily smell white smoke what needs doing. also if it is the...
As previously mentioned ive been having issues with my ess sensor ive gone under the car this morning to get it off and clean and the ess sensor bolt has snapped with the thread still in there not leting me remove the sensor, even had Phil bates say i could try a new sensor sometime this week, so...
Just wondering whether there are any more cigarette ports other than the one in the ash tray? I'm thinking about buying a dashcam and it'll need to be plugged into a cigarette port which if there's only one, will leave me without a spare if I need it. I would consider hard wiring it into a...
Shell Fuel Save 95(RON)
Shell V-Power 95 (RON)
Mol 95 (RON)
and Mol 100(RON).
To date I've been filling up with Mol 100. But I'm absolutely not familiar with the brand.
First question: Why does Shell have eleventy-billion ratings for their V-power...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum