This forum is just a part of the RX-8 Owners Club; to get the best out of the Club you should really look at joining up!
Here are some of the benefits of being a Club member:
See and post in all parts of the forum
As a guest, you can only see a...
Quick introduction: I'm Daniel and I'm writing to you from Southern Spain. I'm thinking of buying an RX8 as a weekend car.
Have been reading this forum for a while now, but I haven't found a topic discussing overall reliability differences between the 192 and the 231.
Not pounds but miles .Celebrated the big 100k on the M25 at a respectable speed last weekend. Original engine still going strong as are most parts from 2003( except a new lamda sensor,new master cylinder, refurbed alternator, lc rotary steering rack,new radiator and reservoir).
My surprise and...
Ultimate question is whether it's a range extender or a pure-rotary car. The choice of imagery suggests a rotary powered car. Given the timing that would mean an announcement tomorrow...
None-of you will know me, as while I've had, or answered a couple of posts.. I've really just been a lurker. I've had my beloved RX-8 since 2007 and loved every minute of it (SO fun).. but it's time to hand it in for a new, different car (today, as it happens!). Just wanted to say thanks to...
Got a jdm plate holder for the rear of car and needing a 12x6 plate to fit it - it's a jdm car so no bother there.
I ordered a plate from Pro plates and it's turned up today - as you can see it's lime green. You can also just about see that it's also scratched to hell - how hard could...
Seem to have lost my socket 😞
Only way of used before is a reverse threaded cutting socket but obviously with the spinning collar on Mazda nuts that’s not going to work.
Anyone have any useful tips for getting them off ?
in Feb I got wind of an RX8 'that looked like mine' going for scrap, I promptly told the scrap man, I'd give him a £100 and to drop it off at my house, at the time it just had a dented wing and 'a problem with the carb'.... Great I thought, my other friend who knew the farmer who owned the RX8...
Having just changed the coolant, brake fluid and oil filter I have been using the scissor jack along with my trolley jack, the sissor jack has not had a lot of use but after I had used it a couple of times yesterday for some reason it has got really hard to turn once the weight is on it I cannot...
As my car was in for its MOT today (passed OK) while they had it at a local garage I asked for a quote to change the brake fluid - if no problems - £80 is that for real?
a while back I got some harder bushes for the diff mounts in the car.
Now i'm looking at options for full diff mount replacements, am I correct in thinking that this will only transfer some of that unwanted movement to the rear axles? Will this mean, awesome gearbox, awesome diff =...
Hi guys. I finally got my car completed and on the road, I'm delighted, looking gorgeous (my opinion) and going great. Thing is I have received a spare 231 engine, not in bad condition but could do with a rebuild. So my winter project begins. I'm going to strip and rebuild it but want to port it...
Just wondering what the experiences are of others amongst the forum, who run the Eibach lowering springs on the OEM dampers? This is what I am running currently and seems to be doing ok, I have paired these with 235/40R18 tyres and custom fast road geometry. Overall car feels sportier...
So, car wouldn’t start today! I’ve not driven it all weekend as I’ve been away, and over the course of 3 days it seems to have flooded. Luckily I had a father-in-law to hand, as I’d run down the battery trying to start it and then went on to jump-start from his motor. Eventually got it started,...
There's an audible whine when I drive the car recently. It's so noticeable that I can hear it as much as my ridiculous air intake. Thought it might be interference coming out of the speakers but it's present even when they're off and sounds like it's coming from the engine bay.
Thanks for everyone who offered help and advice in buying an RX-8.... And I've finally got one!! :D
I've bought a 231 off a member from here - Northerner69 - a top bloke and as honest as they come. I know that the car will need some work doing in the months/ years to come, but i'm very happy...
hey guys ive been looking at buying an r3 through kent rotaries, who offer a 3rd party warranty with a company handler protect who they claim warranty the engine, does this seem to good to be true?
As per title
NRG quick release steering boss
Would any of you lovely’s know how to connect the horn before I spend hours searching the net
Help please
Should be a simple earth I hope
Thanks
Wayne
Hi all, I've seen an RX-8 which I think potentially could be a good purchase, but could use some expert advice, please?!!
It's an early S1 model, with a genuine 48k mileage on it. Appears cosmetically in a very nice condition. MOT history doesn't show anything particularly scary.... only note to...
I've found many links and downloads to the workshop set of manual, very decent and complete. All that I have found so far are clearly copies of the USA spec manuals, certainly useful, but there is no explicit info on the possible differences for Eurospec RX-8s. In general, mechanically the...
As above i have a misfire on rear rotor,this only ever happens now and again and the only time this happens is when the car is cold and not been used for a few days,it only does it on start up(so car idles rough),this last for no more than one minute then car runs sweet. As said...
My exhaust looks like it is sitting slightly at an angle and since it is quite a old one (probably one from the original stock car on a 53 plate), I think I need to replace it in order to get it through MOT - can you guys recommend me one I can buy off ebay ?
Hi folks, I realise this has been asked before, but despite trawling Google and this forum I cannot find a fix for it.
I had my suspension and drop links replaced recently, I now have Tein flex.
Before they were changed my car was around an inch lower on the drivers side, now my suspension has...
Well, after 15 years of valiant service and hard use, my rotor has failed...............
The screw holding my club rotor fob onto my key ring has sheared :shock: :lol: I'll try to drill it out and use a new screw, but I'm not sure if it'll be successful.
Those that know me, know i have been an 8 owner for quite some time, i bought my car in 2009, and was one of the first owners within the UK to really go to town with modifications. My car was quite well know within this...
A number of people are experiencing issues connecting to the forum. We are aware and are attempting to resolve. The root issue appears to be DNS related and will, eventually, effect everybody.
If you are comfortable making changes to you PC, a temporary workaround will be to add:
So my Sunlight Silver RX8 has succumbed to the dreaded tin worm on the sills and some of the floor pan and although repairable, it was going to cost too much save. The MOT runs out on Tuesday and obviously won’t get through :(
Can anybody recommend or know of somewhere to get a compression test done on my RX8? I don't want to pay a fortune for dealership prices, I'm sure I heard somewhere of one of the specialist doing a rental/diy job or was that a remapping service? I'm based near Milto Keynes so preferably I'd like it...
After plonking in a rebuilt engine and replacement gearbox. I looked forward to a summer of fun!
Unfortunately I’m experiencing rough idling, surging at idle and stalling even after car has warmed up. I’ve carried out the ecu reset and it’s been driven excess of 200...
I've heard talk that the RX-8 isn't great off the lights, or that it doesn't have great acceleration because of low torque. Is this just a case of poor acceleration from standing still I take it? I'm guessing once you get over the 4k revs mark it starts to fly?
How many keys should I expect? How many were originally supplied - as in master keys, valet, and fobs? the owner's manual doesn't make it explicit other than different functionality. A BMW I had was supplied with 2 master keys plust a 3rd limited function key. Thanks.
hello all,take a look at ebay item 3627 2677 4306. the ad says new cambelt, and just out of curiousity i messaged the seller thinking they meant fan belt.
i have just received a reply saying CAMBELT was changed 2 months ago with a receipt to proove it.
i just thought this may be useful to any...
hi all is there any where i can get a wiring diagram for 54 plate 8.
my secondery oil pump has no live feed to it and is putting the car into limp p1688 .
any help would be most appreciated .
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum