The Rx8 sumps are all looking a bit worse for wear these days and the early ones were never really that good for controlling the oil flow around the engine pick up meaning oil starvation when on track. Say hello to the RRP Rx8 billet sump to be Machined from 6061 Aluminium and then Anodised in Dark...

I'm thinking of offering 2 Ltd edition colours of my 4 piece pulley set, I'm just getting a feel for what you guys want and whether you might or would definitely order

Will be a limited batch of 10 each colour.

Details here:

Screenshot_20190405-205551_Samsung Internet.jpg

I have shared this on Facebook so thought I would get the convo going here too :)

Finally the Rx8 peripheral ported engine is coming soon!!!
No more restrictive side ports now you'll have all the benefits of the Rx7 but with the better intake and oil system of the Rx8, not to mention that this...

So about to go live with my new remote mapping service, this is for the full bespoke map only. Full remap including postage of the hardware £200

Full details of what's included in the full map is at

The process:

1. You pay £400 for the service and hardware deposit. (I will reduce the deposit...

So we have been at it again guys, experimenting with engines, as you most of you know we went up to Rotary Revs in September with our latest 231 Full Bridgeport Engine which saw us get 212WHP (Wheel Horse Power) which would be roughly around the 245HP mark.

This 231 had fantastic mid range one of...

Ryan Rotary Performance Coil MKII

Preview for all forum members:

I know what you’re all thinking, do we really need another aftermarket coil system for the Rx8 after all there are plenty to choose from which do the job well including my own performance system.

Yes, they all do the job well but...

The RRP engine build configurator:

This is still work in progress (the finer detail and polish yet to be worked out) but it's ready for you guys to have a play on and itll answer the question. How much is my rebuild going to cost with X, Y and Z

Have a go! See what you come in at! It's fun...

So I have been asked several times to come up with a nice tank solution to the RRP COFS and SOHN adapter.

Below is an idea of what I have come up with, basically an Aluminium backing plate that houses two black 1 litre Aluminium tanks, one for the oil reservoir for the COFS adapter and one for...

So as we now have a complete family of exhausts for the Rx8 series 1 and R3 I thought I would do a thread in one place showing all the options.

The Flagship is the Active Catback system for both S1 and R3

Available in T304 Stainless Steel and now Titanium!
Other options include a mechanical...

EDIT 14/11/2018

The leads are now ready to purchase, rather do a complicated group buy I've now decided to put them up on the website with a sale for all, so leads are £64.99 until the new year, for those you have purchased the coils, a free shipping code can be used coils this is will give you...

So I think im reading the market right both here and abroad that what Rx8 owners want is a new supercharger kit.

I believe I can bring a new kit to the market, the pulleys I have created are interchangeable with the Kenne bell 2.1L
And this is the charger I would base my kit around.

So features...

I wasn't expecting to have to rebuild my car just yet but at silverstone a few weeks back the car was not quite performing how it should, i finished the day drove home and put it in the garage. A week or so later i got the car out and it wouldn't start. i put it down to the race battery and bought...

Guys,

Just canvassing your thoughts on the following.

I have been in contact with Epifan, he is the company/guy who supplies the Mazdaedit software. I have confirmed that the Mazdaedit lite version is compatible with the Chinese version of the Tactrix OBDII* dongle, this Chinese supplier retails...

So as you all know I have an MSD coil system on the market but at £499.99 is quite a large chunk to throw out, so I thought I would produce something more accessible and quite possibly the cheapest performance coil system on the market with lifetime warranty!

Product description

New Ryan Rotary...

The Ryan Rotary Performance 4 piece pulley is here!
R3 version will be here soon and you can now pre order either via the website :)

All billet Aluminium:

1 x lightweight crank pulley not under-driven
1 x A.C idler pulley
1 x lightweight waterpump pulley not under-driven
1 x lightweight...

I apologise in advance for another round of temptation :^o

There doesn't seem to be a decent affordable gauge solution for the Rx8 so thought I remedy that for us :thumright:

Will be ready in a couple of weeks will come complete with:

Recessed style gauge pod in piano black (ashtray)
Prosport...

We have been at it again! Finally an affordable 3inch decat for the Rx8!

Beautifully constructed from polished T304 stainless steel and Tig welded joins, compatible with all Rx8 exhaust systems for both the series 1 and series 2.

Again We are offering Rx8 club members an introductory price of...