I should really do something about fixing my 8.

Does anyone have a rear near side toe control link (if they’re handed?) or probably more realistically a whole hub with all the arms and links connected. I imagine that’s easier as I could the links come off easily with inherent corrosion.

Thanks.

As above , Pettit catback in S1 fitment

Good condition, just wants a good polish up

Collection Cookham SL6 or can courier at buyers cost

If collecting , happy to fit it for/with you

£500

Sooo,

I bought a second hand racing beat cat back a while ago,and it's never really lined up properly.
It's due to the mid pipe not being the original, it clearly a rough fabricated one, as it's covered in weld splat.
Anyway,,,,
Anyone got one laying around,? Or will a cheaper ie toyo pipe do the...

Bit of a long shot but does anyone have a new or nearly new expansion tank?

There seems to be a worldwide shortage and I could do with one asap

Thanks

Hi, selling my RX8 Kuro on here as I want it to go to someone who appreciates the car! You won’t find it listed anywhere else. I need something a little more practical. I have debated on keeping her as I have used as my daily to and from work car since 2018, and she runs well but it’s time for her...

Got a passenger airbag cover from an R3 - no cracks etc. Just needs a clean.

If anyone wants it hit me up with an offer. Can ship at buyer's expense, but if shipping it won't come with the airbag itself, just the cover.

Hi , as tittle.
Need stock black bumper
Passenger front wing
Passenger door

Ideally up north near Bradford/Leeds but will travel a bit to pick it up .

The following taking up space
Mazda extras from
The dealer , look quite neat £80.00
For the pair
Collection only , be scared to post

Stainless steel exhaust liners shields
As the last , exacts from the dealer
which have been butchered for an aftermarket Toyo exhaust on the inside , not...

SOLD!

Here we have I think as it's the same as the new one a grams styling rear plate surround for sale will need a rub down and a decent clear coat, no cracking just dull lacquer
New delivered is £183 so open to decent offers

Pair of fibreglass side skirts for the RX-8 for sale. Had them with the banana but have decided to use the standard R3 skirts as i've now got the wing mounting holes to cover on the R3 front wings.

In need of a paintjob and a little love, but are a cheaper way into mazdaspeed side skirts compared...

With R3 Fuel Pump assemblies costing £640 from Mazda and only available from Japan we now have a fuel pump kit that is a direct replacement for your tired R3 2008-2011 fuel Pump.

We also have and have sold hundreds of fuel pump kits for Series 1 2003-2008 models and both types can be found on...

Looking for Good 192 Five Speed Gearbox with bellhousing and gear lever to help a friend out who helps me with the race car ?

Block8 Air Vent Twin Gauge Pod!

Don't know if these are still being made? Think I paid around £135 with import fee's?

Doesn't fit AEM gauges, just your usual standard ones. Did start grinding/sanding part of it to fit my AEM gauge then gave up.

Pictures of said part to be added later.

Can post,...

Probably an odd one here, but maybe someone might want it?

Reg - GH05 TOE

Ideal for any white car, van what have you.

Just like what it owes me, £800!

IMG_3550.jpg

If anyone has any of these from one being broken up, please can I be considered? I need all 4.

Cheers

Ive got a leather drivers and rear seats in fair condition. Passenger seat has been spoken for and as such if nobody wants the rest of it itll be being binned.

I've occasionally seen what looked like stainless steel surrounds inside RX8 exhaust shrouds.

I haven't seen any on eBay in a while.

Anybody around here has a pair in good condition?

As above I am looking for a single gauge pod (preferably something like the block8head vent pod, I don't believe that shop is active anymore), for my R3.

Planning on putting an OBD2 gauge in.

Cheers

Steve

My set of track wheels for sale.

Alloys are AXE EX14 18 x 8J, spigot rings in to make it 67.1mm CB. I believe ET50 same as stocks? As they look the same offset at the originals without spacers (see first pic on my R3 sans spacers). Comes with a set of centre caps installed, and a spare set brand...

If anyone is thinking of selling theirs for up to £2,500, pls let me know? It would be my first one so I don't want to spend a fortune on it, am just after something that looks & sounds smart for weekend driving, not too OTT with modifications, and maybe suitable for the odd track day.

I'm based...

Good condition and comes with a mesh screen and brand new filter. Collection from Guildford or happy to post at buyers expense. I also have the RB air duct if someone wants a complete system. £350 for both

20240717_134856.jpg

20240717_135308.jpg

20240717_134824.jpg

20240717_134817.jpg...

Don't use my Sonos speaker anymore, works fine just excess to my requirements now.

Great sound quality, uses wifi rather than bluetooth so can stream HQ streams etc.

Don't have a pic RN, but can get one later.

Hi Guys,

I'm looking to upgrade my DSLR camera to a newer mirrorless one, and as such will have my D3300 up for sale. It's a fantastic piece of kit with a shutter count of just shy of 17000 - so LOADS of life left in it.

I don't have the original 18-55mm kit lens, as I upgraded to an 18-105mm...

PZ spoiler on a black bootlid for sale. bootlid doesn't have any brake light rust, but does have a few chips that have started rusting - one on the back face next to the logo and a few ontop.

No brake light harness or light included. Spoiler can be removed and posted out on it's own, if bootlid is...

Alloy fuel flap for sale. Has been painted green for some reason :lol: :lol: :lol:

£25 Collected from Doncaster, or £30 posted.

PXL_20240921_121153472.jpg
PXL_20240921_121156884.jpg

Replica Mazdaspeed front bumper for the RX-8 for sale. Was the bumper that came on my banana but have now gone to the MZ/R3 front end so can't make use of this one anymore!

In good condition, drivers side bracket on the edge has damage, but most of which is hidden under the indicator. There is a...

Very odd request I’m sure, but, looking for anyone who might have any broken headlights or tail lights lying around they no longer want, series 1 or R3, I don’t mind.

Thanks in advance

Welcome to the sale of a 192bhp engine.
The engine has covered 58000 miles and the compression figures have been taken on a hot engine.
The engine starts hot and cold with no issues.
The engine will come complete minus the omp and i would like to get £700 for it.
Delivery and fitting services...

After some 4 pots after Snetterton lol freaky parts anyone got any for sale and a series 1 fuel basket I understand some people have sourced a copy part not from mazda!

Used stainless steel 3-1 tubular manifold.
Great condition,unknown make but good condition.
The air port is blocked so air pump be useless.
£120 posted.
Thanks for watching!

Welcome to the sale of a blue AEM intake.
The intake is complete,in great condition and comes with all hardware.
The filter comes with the genuine AEM weatherproof sock.
As a bonus you can have the colour coded blue aluminium tray that masks the radiator nicely.
Price is £240 posted on the...

Good condition genuine Mazdaspeed front bumper for sale - QSE1 marker on the inside and sticker on the metal bracket. It will require a respray since there is significant lacquer peel, but the overall condition is really good. There is a small piece missing from the indicator part where the bumper...

****THE CAR HAS BEEN SOLD***********

The RX8 has been in the family since 2010.

Originally my brothers, and then mine since 2019.

Need to sell as it's hardly used, and I need space on the drive for another car.

Location: Birmingham area
Reg: DY55WTP
Mileage: 58000
Next MOT: 15/09/2024
2 Keys...

I've had this collecting dust for quite a while now, and decided not to fit it.
It technically new , and never mounted.
It's actually been sprayed black , a pose to the poor black gel coat finish.
These are £79 + postage new.
I'd take £65 posted

Sent from my Pixel 6a using Tapatalk

Giving away a set of four used Extreme 225/40 R18 VR2 R7A - Medium - TW140 tyres.

I had them imported from Germany (at great cost) and they're amazingly sticky. Much grippier than Federals or Acceleras. These are proper motorsport tyres that increase cornering speeds vs 'trackday' tyres and will...

Anyone have a good place to get a crush gasket from? Just need a single, Essex rotary have them, but with £6 postage on a £8 order, hesitant to order from there

With the celebrations this year we have some new Club clothing to show off the 20 years of the RX-8 Owners Club.
Available to order now from the Club shop .

Items can be shipped to you directly, or collected from any of the big events this year.

If you would like to collect at JDM-Combe then I...

I am in the midst of selling my silver coloured sports car and in the process of clearing out my stuff found the club t-shirt given to me by Ian at some track day or other, unopened and unloved; well no longer! I am wearing it right now and it is lovely next to the skin, lovely item; thank you club...