Does anyone have a set of series 1 headlights for sale?
Not fussed about bulbs or anything, planning on splitting them and building a set of custom ones (which may come back up for sale after if someone wants to buy them complete)

Just need the housings to be okay, and lenses to be crack free,...

I’ll be scrapping this soon

Engine, gearbox, seats are gone

If anyone wants anything let me know

Chrome strakes in good condition (maybe aluminium ones).

IMG_20250416_162436_HDR.jpg I've owned my RX8 since approximately 2015. Bought with the intention to become a dedicated track toy. It's a 2005 231 6 Speed in Strato Blue Metallic. It's served well in that role and has had the following modifications made to better enhance it;

• 350Z Rays Forged...

Looking to buy a stunning R3 which has been well looked after and hopefully garaged or stored undercover during winter months, preferably with the following as a minimum:

20mm Pro kit spacers
Coilovers
RRP or oem coils / leads
Miltek or similar catback exhaust
Undersealed
Long MOT
Fast road...

Original R3 catalytic convertor. Whipped off my car in 2016 then installed for one day a year ;)

It's in good condition except for one of the rear bolt threads where I got sloppy drilling out a snapped bolt years ago. See photos. But it tightens up fine.

Would like £200 for it. Collection only....

Ive owned this car longer than any other . Just love it . Have used it for road and for track and its fully sorted for both . Its not suffering from rust . Does have a couple of small dings and various stone chips . That doesn't bother me , it's a working tool .
The engine was built by Carl Hayward...

I picked up a set of used Tiens and the front mounts that came with it have the bolts stripped.

Does anyone have a pair that they'd part with?

Also, the dust covers on 3 of the 4 are shagged so either after a good set or suggestions on where to get them please.

TIA

I have a set of RRP ignition coils with NGK leads.
Not sure on age but they look fairly new as the dust did not even set on them.
Have tested them before removal as i have test driven the vehicle before dismantling it.
I would like £180 for them posted in the UK.
Thanks for watching!

Am breaking my R3 for parts. Some of you may have seen that I am using some parts to build a kit car discussed in this thread:

Parts that are not for sale include the engine, subframes, gear box, PPF and prop, wiring looms and PCM, steering rack and pedals, coolant system, instrument panel,...

Hi all, I'm a new member here & I have some spare parts for sale.
I listed them on eBay and someone reached out to me & suggested I become a member so here I am

So here's the full list of items in the big box, the reason for selling is I'm moving house & I'm downsizing, trying to get rid of as...

RX8 18 5 Spoke Alloy Wheel + Bridgestone Potenza Tyre 225/45/18

When i bought my RX8 there was a spare wheel with tyre in the boot
I've since added a subwoofer so there's no room to keep it in the car

The person who owned it before me had all the wheels refurbished so it's in excellent condition...

I was going through my collection of things I buy and forget about.....

And from the time of my PZ when I lost a centre cap back in 2016 I think, I went to order a replacement and Mazda told me there was only 2 left in the country.

So I bought both, got to have a spare for the spare.

Given that...

One diff from a low mileage R3, never got around to fitting it to my Kuro. Collection from GL12 area.

£400 ONO

does anyone have a PPF nut kicking around? i might have overestimated how many spares i had when i gave a set to someone to get them out of a hole.... and now im 1 short.

I bought a second gearbox for my car in case the rebuilt engine was too much for it, but if you recall the car failed on rust and went to Drews RAF team as a banger.

I need to move the gearbox on as I need the space its in so flagging to see if there is any interest.

Its in Bicester and would...

You are buying a Genuine Exedy 3 piece Clutch Kit from an Official Authorised Exedy Distributor

Kit includes, Pressure Plate, Centre Plate and a better all Metal Clutch Release Bearing to fit any 6 Speed RX-8 2003-2012 including R3 Models,

Exedy Clutches were fitted as standard by Mazda to all...

To Fit Mazda 6 Speed RX8 231, R3 Models Mazda RX7 FC3S T11

Saving £138 The Exedy ZK01T402 Stage 2 Clutch kit covers for the Normal Type Series are designed to achieve a clamping load that is 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile pressure plates...

For Sale:

RacingBeat RX8 REVi Intake Kit. Purchased July 23 and removed from the car in Mar 24. Very low mileage and excellent condition as evidenced by the photo's.

These currently retail for £480 plus delivery and make a great addition / upgrade to your car. No longer required due to...

Free to anyone who many want it. Collection from Birch near Colchester. Good condition apart from a few marks (stone chips etc). It has genuine Mazda struts still attached to the underside. Will leave this up for a week or so, then will chop up the bonnet for scrap if no takers....

does anyone have a source of bluestuff rear brake pads for the rx8? ebc are out of stock and are avoiding answering my questions about when they will be back in stock and both suppliers i usually use cannot get a answer either.

ebc partnumber DP51691NDX

thanks.

Hello.
I'm wondering if anyone has a catalytic converter for sale at a reasonable price?
Cheers.

2009 R3 in Brilliant black.

11 months MOT with no advisories and no rust.

It's just had a check over along with an oil, filter and plug change at RX Motors.

Compression test at 67,118 miles shows:

Front rotor 6.6, 6.3, 6.5.
Rear rotor 6.3, 6.3, 6.4.

Racing beat REVi ram air duct
K&N panel...

ROLL UP! ROLL UP! LADIES AND GENTLEMEN WELCOME TO...

NEW DUKE'S GREAT BODY PANEL GIVEAWAY!

WE HAVE DOORS! (Front and Rear, both sides) A BOOT LID THAT INCLUDES SPOILER AND A REAR BUMPER! ALL IN SPARKLING BLACK AND WE'RE GIVING THEM AWAY FOR FREE!

Even the spoiler?! I HEAR YOU ASK?! YES!...

With the celebrations this year we have some new Club clothing to show off the 20 years of the RX-8 Owners Club.
Available to order now from the Club shop .

Items can be shipped to you directly, or collected from any of the big events this year.

If you would like to collect at JDM-Combe then I...

I am in the midst of selling my silver coloured sports car and in the process of clearing out my stuff found the club t-shirt given to me by Ian at some track day or other, unopened and unloved; well no longer! I am wearing it right now and it is lovely next to the skin, lovely item; thank you club...

Hi All,

As mentioned in the announcement thread, new show plates are available.

In conjunction with the OC stock order we can offer a discounted group buy price of just £8.70 per plate.

If you put quantities and colours in the thread below then I'll add you to the list. The price does not...

Not sure who to reach out to on this, so posting up here.

I've just gone to use my Renewal Gift Voucher, and I'm getting an 'invalid code' error message.

Voucher is in date and hasn't been used until now. Can anyone help please?

Many thanks,
Bill

Hi team,

I placed an order for a couple of white owners club decals on the 9th June and not heard anything or received anything since.

Order number details are:

Order Date: 09 June 2020
Order Reference: 11595812

Could someone let me know if this has been processed?

Cheers!

I've not used my membership renewal gift vouchers, as I'm not that well organised, but I just found my last renewal confirmation in my filing heap and thought I'd treat myself, before it expires like all the rest #-o

The voucher code was worth exactly the same as the item I wanted to buy, which...

Any update on these ? I recall reading a while back they were near ready to sell

Thanks

So what can I get with my £3 Renewal Membership Voucher :?:

Have looked at the Club Shop but there is nothing there for £3 #-o & I can't be the only Member that has noticed this in the Club Shop :!:

Any suggestions :?: :P

8 days later and still no cap?
regards
josh

Would the club be able to do baseball hats with the club logo on?