Hi folks.

One my fans is deed. Anyone have a working set of stock cooling fans that they'd be willing to part with?

Sent from my Pixel 9 Pro using Tapatalk

Just added to our website

This RacingBrake kit will fit the Mazda MX5NC and RX8 models

This RacingBrake Kit with big 332mm diameter discs is a no fuss DIY conversion including all the parts required to give your MX5 NC or RX-8 outstanding braking performance

Direct Bolt on Big Brake kit for...

Hi all,

I'm wondering if anyone may have a spare Oil level gauge pipe for an RX-8 R3?

Mine seems to be sticking when trying to read the oil level and it makes it difficult to get a clean read.

Ended up having a low oil lamp appear over the weekend on the motorway, when I thought I had 2/3 rds...

Bit of a long shot,
Struggling to find them

Sent from my Pixel 6a using Tapatalk

Hi All,

So you're probably as surprised to see this as I am to write it, however rest assured that I am not messing around with any of that piston rubbish and this is to fund another - very special - rotary.

This isn't the place for teasers or anything, so I'll spam everything about my car in...

Hi All,

I have for sale a set of unused Mintex M1144 (MDB1292) brake pads for the 4pot calipers some may have previously brought. (compbrake)

Its my understandingthat the M1144 compound has since been discontinued. :-k .

£80 + uk postage

Or free delivery to Brandshatch trackday on 6th Dec if...

Rx8 231 inlet with ported aux runners £80 posted

Rx8 231 front and rear engine irons. These are bridge and street ported. In my opinion these need to be lapped before being used. No deep scratches. 1 of the bell housing bolt casting needs to be welded back on £100 collected

Rx8 231 front engine...

For sale
Rx8 accelerator pedal £18 posted

231 vfad solenoid and vac tank £15 posted

Boot opener (I think this is rx8) £5 posted

Rx8 6 speed clutch arm £15 posted

For sale Rx8 coolant hoses and joiner bracket thing (hose to thermostat has been trimmed slightly £20 posted

Rx8 racing beat hose in blue £15 posted

Silicone hoses in blue £7.50 posted each

Rx8 clock spring £ 15 posted

Rx8 air bag module £10 posted

Rx8 indicator stalk £10 posted

Rx8 dsc sensor which sits behind clock spring £10 posted

Rx8 head light leveling sensor £10 posted

Rx8 231 engine loom. Spares only as an injector plug and rear o2 sensor plug has been removed.
The ess wires have also been removed from ecu plug

£20 posted

These were removed from my mx5 nc2 at 33k miles.

Rx8 and mx5 nc share the same front suspension arms.

The ball joints and bushes are in excellent condition. The shock bush bearing is showing some signs of external wear but otherwise works fine

£120 posted

Rx8 /MX5 NC front upper suspension arms.

These were removed from my mx5 nc at 33k miles
The bushes and ball joints are in excellent condition.

Mx5 nc and rx8 share the same front suspension arms

1 of the castle nut holes is missing, however nut threads on fine.

£50 posted

Racing beat revi intake tube and 90mm custom air intake piping 90mm with 2no maf screens

No air filter

This fits onto OEM Accordian pipe and turns down in front of front panel behind bumper.

£60 posted

Racing beat silencer 3 stainless steel. These came on the dual resonator exhaust system.

I bought this from Clive/Racing beat as he had a few spare.

£55 posted

Tactrix openport 2.0 obd dongle and lead

£150 posted

Good condition winning blue 192 Mazda RX-8 for sale.

Main points:

Winning Blue colour
192hp, 5-speed manual transmission
Full black leather seats
2 keys
77,638 miles
MOT until April 4th 2025
Stacks of paperwork (V5C present)

Deviations from stock:
Aftermarket Parrot Bluetooth/hands free system...

HT leads - standard and ds585 fitment - £5 posted
Oil tower (old style) including 3 solenoids - £20 posted
Rx8 231intake bellow - £25 posted
Radio display - £15 posted
Bottom pulley - £10 posted
Rx8 231 gear stick has been cut down slightly £25 posted
Rx8 231 MAF - £20 posted
Rx8 Dsc Yaw sensor -...

Hey does anyone have a few wheel nuts?

I have a set of locking wheel nuts and would love to swap for 4 normal ones, or can just buy them.

Happy to buy a set or 4 (or even 3 because the car came with one in the glovebox for some reason lol)

The time has come to sell the car unfortunately. It is still being used as a daily. Engine does still start and runs fine.

Mazda mx5 nc2 white 20th Anniversary edition soft top. I have treated majority of surface rust, no other issues with rot as far as I'm aware.

Spec
RX8 231 engine (low...

Something not an rx8 lol, but I know a few here have r53s, breaking a complete r52 cooper s, everything in really good condition except for the engine which decided it didn't want it's spark plug in cylinder 2

Let me know what parts you need, most should fit all gen 1 minis apart from roof related...

Racing Beat Europe Black Friday

We are offering an extra 5% discount off the website prices. ** Please note the discount does not apply to Genuine Mazda parts and any RacingBrake brake kits**

No discount code is required the 5% discount will automatically be applied at check out and will start...

Now not needed

I was carrying this one as a spare for the Race Car and got it off a running car at time.

£165 delivered in the UK message me to sort out buying it.

As title.
Unused
£200 posted

Sent from my Pixel 6a using Tapatalk

Here are some parts I have left over, free to a good home I just ask for you to cover the postage (which isnt too bad considering I do it through my work).

Airbox with what looks like maybe a K&N filter but not confirmed, take a chance.

Display - it did dim occasionally but then the one I...

Anyone got a bootlid without any rust on it? Ideally after something with a 3rd brake light and a basic spoiler for minimal hole welding.

I have a number plate that I wanted to see if there was any interest for it. I hear it might have been a promo plate but I have no proof to this.

The number plate is.

M77 OOM

So spelling Mazda Zoom

Rx8 231 front ARB bushes powerflex black yellow dot.
These have been used at most 100 miles before I refitted the mx5 nc front arb.

There is some rust marks as the arb was rusty but no damage to bushes.

£45 posted

6 Speed gear knob, not perfect at all but I have seen some a lot worse around.

£20 posted

Black McGard locking wheel nuts in a nice condition, too good to go for free Im afraid.

£20 posted.

4x new and unused R3 wheel centre caps without emblems. I bought these only for the emblems since mine were not in a good condition.

£10 posted

I have a Samco hose kit, 6pcs TCS429C in black. New and unused.

Samco states this is 2008 onwards

£150 UK delivered.

I have a set of unused EBC Ti pad shims for the Megane calipers -

£60 posted

As title,
Super rare,
But obviously no longer needed.
Not sure on value though, feel free to throw me an offer

Sent from my Pixel 6a using Tapatalk

Someone kindly reversed into my side indicator at the hospital car park today. Does anyone have a clear passengers side indicator I can buy? And have sent to Edinburgh

One used filter £20
One new filter £30 Sold

AutoExe air intake for the RX-8, both S1 & R3. Takes the stock panel filter fitment - comes with a used K&N filter. A nice bit of shiny red JDM engine bay bling!

£125 collected from Doncaster DN4, collected from peaks drive or posted for extra.

1.jpg
2.jpg
3.jpg
4.jpg
5.jpg

Got a Seicane head unit for sale for the R3. Plugs straight in, and is able to pick up SWC controls automatically from my Mazda 2 (or if not immediately, they should be programmable to detect them properly on an app on the tablet itself).

Tested with the helping hand of the Mazda 2 (mostly because...