Why not have a go at painting them yourself its not difficult, minor scuffs can easily be dressed out and finished in black covers up a multitude of sins on a set of alloys and considerably cheaper!

*
*
Del.

Has it by any chance been left standing in a pool of salty water most of its life - I hope that is not a case of "One day all RX-8`s will be this way"

*
*
Del.

There is also a 40th Anniversary with a "tilt-adjustable black leather handbrake leaver"

What`s one of them, was it an optional extra?

*
*
Del.

Just out of curiosity for a 22 year old car has it always been correctly serviced and what`s the mileage?

*
*
Del.

qwakers wrote: ↑

Sat Mar 22, 2025 11:47 pm

even a cursory glance tells me its been run on a budget (cheap mismatched tyres) and id give it a miss.

Constancy performance tyres manufactured by the Yuelong Tire Group!

No sorry I just couldn`t!

*
*
Del.

If its any consolation using Mazda dealers for servicing, one dealer put the wrong oil in, another fitted the wrong filter and didn`t replace the dipstick and also damaged the drivers seat back, another filed the front brake pads down in an attempt to stop them squealing and then fitted them incorre...

For any RX-8 owner watching that video it should carry a warning - "This Video of RX-8 ownership may cause distress to your bank account and frequent bouts of sleepless nights!

*
*
Del.

As has been said there is a Bilstein rebuild service not cheap though!

*
*
Del.

LED Headlight LED Daytime Running Lights LED Rear Lights A great spec` for the price I nearly bought one a while back but I wanted 4WD - I hope you are not going to be blinding all the sensitive fellow drivers with your SUV high up really bright LED lights! :-k Where I live I think they have got us...

The reason the sills rot is due to the roof drain channels that exit under the sills, owners don`t keep them clean so they get blocked and the carpets wet.

You will need one of these a trombone cleaner.

*
*
Del.

I understand it is a problem on other VW range cars.

*
*
Del.

The 190 is fitted with projector lenses but H7 halogen bulbs, back in 2004 when I bought my 190 I replaced the H7`s with a Bosch HID kit to the dipped beam which was a great improvement, back then it passed an MOT and it never seemed to affect other drivers!

*
*
Del.

My VZN Formentor pan roof has also proven to be somewhat temperamental but only on hot sunshine days, the touch panel puts the courtesy light on going over a bumpy road and you cannot turn it off, I had the roof open then it wouldn`t close had to use the remote after locking the car. :roll: Consider...

Well with the amount of concern being demonstrated about LED car headlights apparently blinding 9 out of 10 drivers now and with the ongoing investigation by the Governments "Bright Light Minister" a leading bulb manufacturer has explained the reason drivers are struggling with the glare f...

I made two backets approx` the width of the plate which are bolted through the grill then the plate fastened to these with double sided tape, the plate meets with all size requirements etc.

*
*
Del.

Not a lot to say really you have been doing all the right things to keep this great car in a state that does it justice!

*
*
Del.

Uncles yellow car wouldn`t have been a S2 only on S1, incidentally a great pair of legs Ryan, have a good read up plenty of useful information available for the discerning RX-8 owner.

*
*
Del.

The B110 imasen relay under the dash in the footwell area, for RHD cars near the throttle pedal.

*
*
Del.

A voltage test doesn`t necessarily mean the battery is healthy its amps that give the battery its power it needs a load/drop test!

*
*
Del.

OE HID`s are 4300K but I find 6000K give a better whiter light especially picking up reflective surfaces where there is no lighting at all, I have never been flashed by an an coming driver in over 16 years of using them do Night Breaker DS2 bulbs pass that test considering they are claimed to be up ...

rx8hunter wrote: ↑

Fri Jan 03, 2025 7:40 pm

To add to that a cheap multimeter for any car electrical work is priceless

I would also add an OBD11 code reader they are not that expensive but are worth having your own access to fault finding.

*
*
Del.

every single failure i've seen so far has been the sensor sticking. it sticks at the full flow position. if you remove the sensor from the pump, insert a screwdriver into the slot and gently rotate it anticlockwise, it springs back to its home position. it will then work fine. ive revived 3 like th...

Is this still open for entrants?

*
*
Del.

43.76 litres.

njkmr wrote: ↑

Thu Dec 05, 2024 1:20 pm

There is a guy on here working on a turbo kit.

*
*
Del.